NOVA Chemicals Sclair® 35BPM MDPE Extrusion Resin, 2.2% Carbon Black Filled物性表参数

NOVA Chemicals Sclair® 35BPM MDPE Extrusion Resin, 2.2% Carbon Black Filled

NOVA Chemicals Sclair® 35BPM MDPE Extrusion Resin, 2.2% Carbon Black Filled 物性表: NOVA Chemicals Sclair® 35BPM MDPE Extrusion Resin, 2.2% Carbon Black Filled物性表及特性介绍,NOVA Chemicals Sclair® 35BPM MDPE Extrusion Resin, 2.2% Carbon Black Filled注塑参数详情,如需NOVA Chemicals Sclair® 35BPM MDPE Extrusion Resin, 2.2% Carbon Black Filled下载, 可到相关下载区下载

熔体流动速率 [g/10min]: 0.32
密度 [g/cm3]: 0.939
吸水率 [%]: 0.01
拉伸强度 [MPa]: 18.0
弯曲强度 [MPa]: 26.0
弯曲模量 [MPa]: 0.590
脆化温度 [℃]: -100.0

Physical Properties	Metric	English	Comments

Density	0.939 g/cc	0.0339 lb/in³	Base Density
Water Absorption	0.010 %	0.010 %	ASTM D570
Environmental Stress Crack Resistance	1000 hour	1000 hour
Melt Flow	0.32 g/10 min @Load 2.16 kg, Temperature 190 °C	0.32 g/10 min @Load 4.76 lb, Temperature 374 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	60	60	ASTM D2240
Tensile Strength, Ultimate	26.0 MPa	3770 psi	ASTM D638
Tensile Strength, Yield	18.0 MPa	2610 psi	ASTM D638
Elongation at Break	800 %	800 %	ASTM D638
Flexural Modulus	0.590 GPa	85.6 ksi	ASTM D790

Thermal Properties	Metric	English	Comments
Melting Point	128 °C	262 °F	ASTM D3417
Vicat Softening Point	120 °C	248 °F	ASTM D1525
Brittleness Temperature	<= -100 °C	<= -148 °F	ASTM D696

关键词:
供应
2.2% Carbon Black Filled
MDPE
NOVA Chemicals Sclair® 35BPM MDPE Extrusion Resin

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-42840.html

免责声明: 本文 NOVA Chemicals Sclair® 35BPM MDPE Extrusion Resin, 2.2% Carbon Black Filled 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息