- 密度 [g/cm3]: 1.31
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.31 g/cc | 0.0473 lb/in³ | |||
| 1.65 g/cc | 0.0596 lb/in³ | Coating on BOPP | |||
| Solids Content | 55 % | 55 % | |||
| pH | 3.0 | 3.0 | |||
| Water Vapor Transmission | 28.0 g/m²/day @Temperature 38.0 °C | 1.80 g/100 in²/day @Temperature 100 °F | 90% RH; 1 µm Coating on BOPP | ||
| Oxygen Transmission Rate | 80.0 cc/m²/day | 5.15 cc/100 in²/day | 25°C, 1.0 µm, 85% RH; Coating on BOPP | ||
| Viscosity | 25 cP @Temperature 20.0 °C | 25 cP @Temperature 68.0 °F | |||
| Surface Tension | 37 dynes/cm | 37 dynes/cm | Foaming tendency | ||
| Mechanical Properties | Metric | English | Comments | ||
| Coefficient of Friction, Dynamic | <= 0.30 | <= 0.30 | vs. Itself - Coating on BOPP | ||
| Heat Seal Strength Initiation Temperature | <= 100 °C | <= 212 °F | Heat Seal Threshold; 0.4 N/cm; Coating on BOPP | ||
| Processing Properties | Metric | English | Comments | ||
| Shelf Life | 6.00 Month | 6.00 Month | 23°C | ||
| Descriptive Properties | |||||
| Agency Ratings | EC 1907/2006 (REACH) | ||||
| EU No 10/2011 | |||||
| FDA 21 CFR 175.320 | |||||
| FDA 21 CFR 176.170 | |||||
| FDA 21 CFR 176.180 | |||||
| Availability | Asia Pacific | ||||
| Europe | |||||
| North America | |||||
| Emulsion Type | Anionic | ||||
| Features | Good Flexibility | ||||
| Filmability | 14°C | Minimum Film Forming Temperature | |||
| Forms | Liquid | ||||
| Generic | PVDC | ||||
| Heat Seal Maximum Resistance | > 2.0 N/cm | Coating on BOPP | |||
| Uses | Coating Applications | ||||