- 密度 [g/cm3]: 2.27
- 吸水率 [%]: 1.5
- 断裂伸长率 [%]: 20.0
- 硬度: 74.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 2.27 g/cc | 0.0820 lb/in³ | ISO 1183-1 |
| Water Absorption at Saturation | 1.5 - 2.5 % | 1.5 - 2.5 % | |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell R | 74 | 74 | ISO 2039-2 |
| Hardness, Shore D | 70 | 70 | |
| Ball Indentation Hardness | 55.0 MPa | 7980 psi | ISO 2039-1 |
| Tensile Strength | 14.0 MPa | 2030 psi | at Yield; ISO 527-1/-2 |
| Elongation at Break | 20 % | 20 % | ISO 527-1/-2 |
| Elongation at Yield | 6.0 % | 6.0 % | ISO 527-1/-2 |
| Tensile Modulus | 1.90 GPa | 276 ksi | ISO 527-1/-2 |
| Flexural Yield Strength | 20.0 MPa | 2900 psi | |
| Compressive Strength | 11.0 MPa @Strain 1 % | 1600 psi @Strain 1 % | ISO 604 |
| 17.0 MPa @Strain 2 % | 2470 psi @Strain 2 % | ISO 604 | |
| 29.0 MPa @Strain 5 % | 4210 psi @Strain 5 % | ISO 604 | |
| K Factor (ISO) | 6.0 µm/km | 6.0 µm/km | |
| Charpy Impact Unnotched | 2.00 J/cm² | 9.52 ft-lb/in² | ISO 179-1/1eU |
| Charpy Impact, Notched | 0.400 J/cm² | 1.90 ft-lb/in² | ISO 179-1/1eA |
| Coefficient of Friction, Dynamic | 0.15 - 0.25 | 0.15 - 0.25 | |
| Electrical Properties | Metric | English | Comments |
| Surface Resistivity per Square | <= 100000 ohm | <= 100000 ohm | IEC 60093 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 60.0 µm/m-°C @Temperature 23.0 - 100 °C | 33.3 µin/in-°F @Temperature 73.4 - 212 °F | |
| Melting Point | 327 °C | 621 °F | DSC, 10°C/min.; ISO 11357-1/-3 |
| Maximum Service Temperature, Air | 260 °C | 500 °F | Continuous |
| Deflection Temperature at 1.8 MPa (264 psi) | 95.0 °C | 203 °F | ISO 75-1/-2 |
| Flammability, UL94 | V-0 | V-0 | |
| Oxygen Index | >= 95 % | >= 95 % | ISO 4589-1/-2 |
| Compliance Properties | Metric | English | Comments |
| 3A-Dairy | No | No | |
| European Food 1935/2004 | No | No | |
| FDA | No | No | |
| USP Class VI | No | No | |
| Chemical Resistance Properties | Metric | English | Comments |
| Acids, Strong (pH 1-3) | Acceptable | Acceptable | |
| Acids, Weak | Acceptable | Acceptable | |
| Alcohols | Acceptable | Acceptable | |
| Alkalies, Strong (pH 11-14) | Unacceptable | Unacceptable | |
| Alkalies, Weak | Acceptable | Acceptable | |
| Chlorinated Solvents | Acceptable | Acceptable | |
| Conductive / Static Dissipative | Yes | Yes | |
| Continuous Sunlight | Acceptable | Acceptable | |
| Hot Water / Steam | Limited | Limited | |
| Hydrocarbons - Aliphatic | Acceptable | Acceptable | |
| Hydrocarbons - Aromatic | Acceptable | Acceptable | |
| Inorganic Salt Solutions | Acceptable | Acceptable | |
| Ketones, Esters | Acceptable | Acceptable | |