| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 2.23 - 2.25 g/cc | 2.23 - 2.25 g/cc | ASTM D792 |
| Deformation | 5.0 - 6.5 % | 5.0 - 6.5 % | Permanent deformation after 24 hrs @ 23°C; ASTM D621 |
| 9.0 - 11 % | 9.0 - 11 % | ASTM D621 | |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Shore D | 54 - 58 | 54 - 58 | ASTM D2240 |
| Ball Indentation Hardness | 50.0 - 55.0 MPa | 7250 - 7980 psi | ISO 2032-N132 |
| Tensile Strength at Break | >= 12.0 MPa | >= 1740 psi | ASTM D4894 |
| Elongation at Break | >= 160 % | >= 160 % | ASTM D4894 |
| Compressive Strength | 0.785 - 0.883 MPa @Temperature 23.0 °C, Time 86400 sec | 114 - 128 psi @Temperature 73.4 °F, Time 24.0 hour | @ 1% deformation, 140 Kg/cm2; ASTM D621 |
| Coefficient of Friction, Dynamic | 0.15 - 0.17 | 0.15 - 0.17 | ASTM D1894 |
| Coefficient of Friction, Static | 0.17 - 0.19 | 0.17 - 0.19 | ASTM D1894 |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 1.00e+15 ohm-cm | 1.00e+15 ohm-cm | ASTM D257 |
| Surface Resistance | 1.00e+14 ohm | 1.00e+14 ohm | ASTM D257 |
| Thermal Properties | Metric | English | Comments |
| Thermal Conductivity | 0.340 W/m-K | 2.36 BTU-in/hr-ft²-°F | ASTM C 177 |
| Melting Point | 327 °C | 621 °F | DSC |
| Maximum Service Temperature, Air | 260 °C | 500 °F | DSC |
| Minimum Service Temperature, Air | -180 °C | -292 °F | DSC |
| Flammability, UL94 | V-0 | V-0 | |
