- 密度 [g/cm3]: 1.13
- 吸水率 [%]: 1.37
- 缺口冲击强度: 7.0
- 拉伸强度 [MPa]: 80.0
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.13 g/cc | 0.0408 lb/in³ | ISO 1183/A | ||
| Water Absorption | 1.37 % @Temperature 23.0 °C, Time 86400 sec | 1.37 % @Temperature 73.4 °F, Time 24.0 hour | ISO 62 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Tensile Strength, Yield | 80.0 MPa | 11600 psi | ISO 527 type 1 A | ||
| Elongation at Break | 160 % | 160 % | ISO 527 Type 1A | ||
| Elongation at Yield | 4.2 % | 4.2 % | ISO 527 type 1 A | ||
| Tensile Modulus | 2.80 GPa | 406 ksi | ISO 527 Type 1A | ||
| Izod Impact, Notched (ISO) | 7.00 kJ/m² | 3.33 ft-lb/in² | ISO 180/1eA | ||
| Charpy Impact Unnotched | NB | NB | ISO 179/1eU | ||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 1.00e+14 ohm-cm | 1.00e+14 ohm-cm | IEC 60093 | ||
| Surface Resistance | 1.00e+12 ohm | 1.00e+12 ohm | IEC 60093 | ||
| Dielectric Constant | 3.4 | 3.4 | IEC 60250 | ||
| Dielectric Strength | 22.0 kV/mm | 559 kV/in | IEC 60243 | ||
| Dissipation Factor | 0.020 | 0.020 | IEC 60250 | ||
| Comparative Tracking Index | 600 V | 600 V | Solution A; IEC 60112 | ||
| Processing Properties | Metric | English | Comments | ||
| Feed Temperature | 230 °C | 446 °F | |||
| Front Barrel Temperature | 230 °C | 446 °F | |||
| Die Temperature | 240 °C | 464 °F | |||
| Melt Temperature | 222 °C | 432 °F | ISO 11357 | ||
| Descriptive Properties | |||||
| Compression Zone | 230ºC | ||||