DSM Stanyl® TW441 Nylon 46 (European and Asian Grade) (Cond)物性表参数

DSM Stanyl® TW441 Nylon 46 (European and Asian Grade) (Cond)

DSM Stanyl® TW441 Nylon 46 (European and Asian Grade) (Cond) 物性表: DSM Stanyl® TW441 Nylon 46 (European and Asian Grade) (Cond)物性表及特性介绍,DSM Stanyl® TW441 Nylon 46 (European and Asian Grade) (Cond)注塑参数详情,如需DSM Stanyl® TW441 Nylon 46 (European and Asian Grade) (Cond)下载, 可到相关下载区下载

密度 [g/cm3]: 1.18
拉伸强度 [MPa]: 55.0

Physical Properties	Metric	English	Comments

Density	1.18 g/cc	0.0426 lb/in³	(DAM); ISO 1183
Linear Mold Shrinkage, Flow	0.020 cm/cm	0.020 in/in	DAM; ISO 294-4
	0.020 cm/cm	0.020 in/in	DAM; ISO 294-4

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	55.0 MPa	7980 psi	ISO 527-1/-2
Elongation at Break	>= 50 %	>= 50 %	ISO 527-1/-2
Elongation at Yield	20 %	20 %	ISO 527-1/-2
Tensile Modulus	1.00 GPa	145 ksi	ISO 527-1/-2
Charpy Impact Unnotched	NB @Temperature -30.0 °C	NB @Temperature -22.0 °F	ISO 179/1eU
	NB @Temperature 23.0 °C	NB @Temperature 73.4 °F	ISO 179/1eU
Charpy Impact, Notched	1.20 J/cm² @Temperature -30.0 °C	5.71 ft-lb/in² @Temperature -22.0 °F	ISO 179/1eA
	4.50 J/cm² @Temperature 23.0 °C	21.4 ft-lb/in² @Temperature 73.4 °F	ISO 179/1eA
Tensile Creep Modulus, 1000 hours	500 MPa	72500 psi	ISO 899-1

Thermal Properties	Metric	English	Comments
Melting Point	295 °C	563 °F	10°C/min (DAM); ISO 11357-1/-3

Descriptive Properties
Injection Molding	Yes
Other Extrusion	Yes

关键词:
PA46
供应
DSM Stanyl® TW441 Nylon 46 (European and Asian Grade) (Cond)

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-44668.html

免责声明: 本文 DSM Stanyl® TW441 Nylon 46 (European and Asian Grade) (Cond) 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络