TP Composites HiFill® PA4/6 GF33 HS NAT 33% Glass Filled (Conditioned)物性表参数

TP Composites HiFill® PA4/6 GF33 HS NAT 33% Glass Filled (Conditioned)

TP Composites HiFill® PA4/6 GF33 HS NAT 33% Glass Filled (Conditioned) 物性表: TP Composites HiFill® PA4/6 GF33 HS NAT 33% Glass Filled (Conditioned)物性表及特性介绍,TP Composites HiFill® PA4/6 GF33 HS NAT 33% Glass Filled (Conditioned)注塑参数详情,如需TP Composites HiFill® PA4/6 GF33 HS NAT 33% Glass Filled (Conditioned)下载, 可到相关下载区下载

密度 [g/cm3]: 1.43
吸水率 [%]: 1.5
缺口冲击强度: 1.49
拉伸强度 [MPa]: 117.0
弯曲模量 [MPa]: 5.38

Physical Properties	Metric	English	Comments

Density	1.43 g/cc	0.0517 lb/in³	ASTM D792
Water Absorption	1.5 % @Time 86400 sec	1.5 % @Time 24.0 hour	ASTM D570
Linear Mold Shrinkage, Flow	0.0060 cm/cm @Thickness 3.17 mm	0.0060 in/in @Thickness 0.125 in	ASTM D955

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	117 MPa	17000 psi	ASTM D638
Elongation at Break	7.0 %	7.0 %	ASTM D638
Flexural Strength	186 MPa	27000 psi	ASTM D790
Flexural Modulus	5.38 GPa	780 ksi	ASTM D790
Izod Impact, Notched	1.49 J/cm @Thickness 3.17 mm	2.80 ft-lb/in @Thickness 0.125 in	ASTM D256

关键词:
PA46
供应
TP Composites HiFill® PA4/6 GF33 HS NAT 33% Glass Filled (Conditioned)

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-44736.html

免责声明: 本文 TP Composites HiFill® PA4/6 GF33 HS NAT 33% Glass Filled (Conditioned) 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络