- 吸水率 [%]: 1.5
- 缺口冲击强度: 0.4
- 拉伸强度 [MPa]: 83.0
- 弯曲模量 [MPa]: 3.10
- 硬度: 120.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.45 g/cc | 1.45 g/cc | Dry; ASTM D792 |
| Water Absorption | 1.5 % | 1.5 % | Wet |
| Linear Mold Shrinkage | 0.0050 cm/cm | 0.0050 in/in | Dry; ASTM D2863 |
| Linear Mold Shrinkage, Transverse | 0.011 cm/cm | 0.011 in/in | Dry; ASTM D2863 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell M | 74 | 74 | Wet; ASTM D785 |
| 94 | 94 | Dry; ASTM D785 | |
| Hardness, Rockwell R | 120 | 120 | Dry; ASTM D785 |
| Tensile Strength, Yield | 83.0 MPa | 12000 psi | Wet; ASTM D638 |
| 125 MPa | 18100 psi | Dry; ASTM D638 | |
| Elongation at Break | 3.0 % | 3.0 % | Dry; ASTM D638 |
| 4.0 % | 4.0 % | Wet; ASTM D638 | |
| Flexural Strength | 118 MPa | 17100 psi | Wet; ASTM D790 |
| 190 MPa | 27600 psi | Dry; ASTM D790 | |
| Flexural Modulus | 3.10 GPa | 450 ksi | Wet; ASTM D790 |
| 6.10 GPa | 885 ksi | Dry; ASTM D790 | |
| Izod Impact, Notched | 0.400 J/cm | 0.749 ft-lb/in | Dry; ASTM D256 |
| 0.490 J/cm | 0.918 ft-lb/in | Wet; ASTM D256 | |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 40.0 µm/m-°C @Temperature 20.0 °C | 22.2 µin/in-°F @Temperature 68.0 °F | Dry; ASTM D696 |
| Deflection Temperature at 1.8 MPa (264 psi) | 240 °C | 464 °F | Dry; ASTM D648 |