- 吸水率 [%]: 1.5
- 缺口冲击强度: 1.5
- 拉伸强度 [MPa]: 65.0
- 弯曲模量 [MPa]: 1.90
- 硬度: 82.0
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Water Absorption | 1.5 % | 1.5 % | 24 hour; ISO Test | ||
| Linear Mold Shrinkage | 0.012 cm/cm | 0.012 in/in | ASTM Data; MD | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Rockwell R | 82 | 82 | ASTM Test | ||
| Tensile Strength, Yield | 65.0 MPa | 9430 psi | 2 in/min; ASTM Test | ||
| Elongation at Break | >= 100 % | >= 100 % | 2 in/min; ASTM Test | ||
| Elongation at Yield | 4.0 % | 4.0 % | 2 in/min; ASTM Test | ||
| Flexural Strength | 65.0 MPa | 9430 psi | ISO Data | ||
| 85.0 MPa | 12300 psi | ASTM Test | |||
| Flexural Modulus | 1.90 GPa | 276 ksi | ISO Data | ||
| 2.27 GPa | 329 ksi | ASTM Test | |||
| Izod Impact, Notched | 1.50 J/cm @Thickness 3.17 mm | 2.81 ft-lb/in @Thickness 0.125 in | ASTM Test | ||
| Izod Impact, Notched (ISO) | 14.0 kJ/m² | 6.66 ft-lb/in² | ISO Test | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear | 99.0 µm/m-°C @Temperature -30.0 - 30.0 °C | 55.0 µin/in-°F @Temperature -22.0 - 86.0 °F | ASTM Test | ||
| Melting Point | 220 °C | 428 °F | ASTM Test | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 60.0 °C | 140 °F | ASTM Test | ||
| Descriptive Properties | |||||
| Color | BK-102 | ||||
| Commercial Status | Active America | ||||
| Impact Modified | Yes | ||||
| Primary Processing Technique | Injection Molding | ||||
| UL.UL-C | Yes | ||||