- 密度 [g/cm3]: 1.0
- 吸水率 [%]: 1.4
- 拉伸强度 [MPa]: 20.0
- 热变形温度 [℃]: 50.0
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.00 g/cc | 0.0361 lb/in³ | ISO 1183 | ||
| Water Absorption | 1.4 % | 1.4 % | ISO 62 | ||
| Moisture Absorption | 0.700 % | 0.700 % | ISO 62 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Ball Indentation Hardness | 25.0 MPa | 3630 psi | conditioned; ISO 2039-1 | ||
| Tensile Strength at Break | 30.0 MPa | 4350 psi | conditioned; ISO 527-1/-2 | ||
| 45.0 MPa | 6530 psi | dry; ISO 527-1/-2 | |||
| Tensile Strength, Yield | 20.0 MPa | 2900 psi | conditioned; ISO 527-1/-2 | ||
| Elongation at Break | >= 50 % | >= 50 % | conditioned; ISO 527-1/-2 | ||
| >= 50 % | >= 50 % | dry; ISO 527-1/-2 | |||
| Elongation at Yield | 45 % | 45 % | conditioned; ISO 527-1/-2 | ||
| Tensile Modulus | 0.250 GPa | 36.3 ksi | conditioned; ISO 527-1/-2 | ||
| 0.300 GPa | 43.5 ksi | dry; ISO 527-1/-2 | |||
| Charpy Impact Unnotched | NB | NB | dry; ISO 179/1eU | ||
| NB | NB | conditioned; ISO 179/1eU | |||
| NB @Temperature 30.0 °C | NB @Temperature 86.0 °F | dry; ISO 179/1eU | |||
| NB @Temperature 30.0 °C | NB @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
| Charpy Impact, Notched | NB | NB | dry; ISO 179/1eA | ||
| NB | NB | conditioned; ISO 179/1eA | |||
| 1.20 J/cm² @Temperature 30.0 °C | 5.71 ft-lb/in² @Temperature 86.0 °F | dry; ISO 179/1eU | |||
| 1.30 J/cm² @Temperature 30.0 °C | 6.19 ft-lb/in² @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 1.00e+13 ohm-cm | 1.00e+13 ohm-cm | conditioned; IEC 60093 | ||
| Surface Resistance | 1.00e+12 ohm | 1.00e+12 ohm | IEC 60093 | ||
| Dielectric Strength | 32.0 kV/mm | 813 kV/in | conditioned; IEC 60243-1 | ||
| Comparative Tracking Index | 600 V | 600 V | conditioned; IEC 60112 | ||
| Thermal Properties | Metric | English | Comments | ||
| Melting Point | 173 °C | 343 °F | 10°C/min; ISO 11357-1/-3 | ||
| Maximum Service Temperature, Air | 80.0 °C | 176 °F | long term; EMS | ||
| 110 °C | 230 °F | short term; EMS | |||
| Deflection Temperature at 0.46 MPa (66 psi) | 50.0 °C | 122 °F | ISO 75-1/-2 | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 40.0 °C | 104 °F | ISO 75-1/-2 | ||
| Descriptive Properties | |||||
| Additives | Plasticizer | ||||
| Automotive | Compressed air systems | ||||
| Fuel systems | |||||
| Form | Granules | ||||
| Industry & Consumer goods | Hydraulics & Pneumatics | ||||
| Processing | Other Extrusion | ||||
| Product Attributes | Flexible | ||||
| High viscosity | |||||
| Special Characteristics | High impact or impact modified | ||||
| Improved heat resistance | |||||
| Improved UV resistance (outdoor use) | |||||