- 密度 [g/cm3]: 1.22
- 吸水率 [%]: 1.4
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.22 g/cc | 0.0441 lb/in³ | ISO 1183 | ||
| Water Absorption | 1.4 % | 1.4 % | ISO 62 | ||
| Moisture Absorption | 0.600 % | 0.600 % | ISO 62 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Shore D | 80 | 80 | conditioned, 15s; ISO 868 | ||
| Ball Indentation Hardness | 120 MPa | 17400 psi | conditioned; ISO 2039-1 | ||
| Tensile Strength at Break | 110 MPa | 16000 psi | conditioned; ISO 527-1/-2 | ||
| 120 MPa | 17400 psi | dry; ISO 527-1/-2 | |||
| Elongation at Break | 6.0 % | 6.0 % | dry; ISO 527-1/-2 | ||
| 6.0 % | 6.0 % | conditioned; ISO 527-1/-2 | |||
| Tensile Modulus | 5.70 GPa | 827 ksi | conditioned; ISO 527-1/-2 | ||
| 6.50 GPa | 943 ksi | dry; ISO 527-1/-2 | |||
| Charpy Impact Unnotched | 8.00 J/cm² | 38.1 ft-lb/in² | conditioned; ISO 179/1eU | ||
| 8.00 J/cm² @Temperature 30.0 °C | 38.1 ft-lb/in² @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
| Charpy Impact, Notched | 2.50 J/cm² | 11.9 ft-lb/in² | conditioned; ISO 179/1eA | ||
| 1.50 J/cm² @Temperature 30.0 °C | 7.14 ft-lb/in² @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 1.00e+13 ohm-cm | 1.00e+13 ohm-cm | conditioned; IEC 60093 | ||
| Surface Resistance | 1.00e+12 ohm | 1.00e+12 ohm | IEC 60093 | ||
| Dielectric Strength | 32.0 kV/mm | 813 kV/in | conditioned; IEC 60243-1 | ||
| Comparative Tracking Index | 575 V | 575 V | conditioned; IEC 60112 | ||
| Thermal Properties | Metric | English | Comments | ||
| Melting Point | 180 °C | 356 °F | 10°C/min; ISO 11357-1/-3 | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 165 °C | 329 °F | ISO 75-1/-2 | ||
| Deflection Temperature at 8.0 MPa | 90.0 °C | 194 °F | ISO 75-1/-2 | ||
| Descriptive Properties | |||||
| Automotive | Cooling and climate control | ||||
| Fuel systems | |||||
| Form | Granules | ||||
| Industry & Consumer goods | Heating systems | ||||
| Processing | Injection Molding | ||||
| Product Attributes | Hydrolysis resistant | ||||
| Special Characteristics | High impact or impact modified | ||||
| Improved heat resistance | |||||
| Improved UV resistance (outdoor use) | |||||