- 密度 [g/cm3]: 1.03
- 吸水率 [%]: 0.95
- 拉伸强度 [MPa]: 41.0
- 弯曲模量 [MPa]: 1.14
- 热变形温度 [℃]: 145.0
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.03 g/cc | 0.0372 lb/in³ | ISO 1183 | ||
| Water Absorption | 0.95 % @Temperature 23.0 °C, Time 86400 sec | 0.95 % @Temperature 73.4 °F, Time 24.0 hour | ISO 62 | ||
| Moisture Absorption at Equilibrium | 0.75 % @Temperature 20.0 °C | 0.75 % @Temperature 68.0 °F | 50% RH; ISO 62 | ||
| Linear Mold Shrinkage, Flow | 0.0040 cm/cm @Thickness 2.00 mm, Time 86400 sec | 0.0040 in/in @Thickness 0.0787 in, Time 24.0 hour | |||
| Linear Mold Shrinkage, Transverse | 0.0080 cm/cm @Thickness 2.00 mm, Time 86400 sec | 0.0080 in/in @Thickness 0.0787 in, Time 24.0 hour | |||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Shore D | 68 | 68 | After 15 sec, Conditioned 15 days at 23°C - 50% RH; ISO 868 | ||
| 75 | 75 | Instantaneous, Conditioned 15 days at 23°C - 50% RH; ISO 868 | |||
| Tensile Strength at Break | 58.0 MPa | 8410 psi | Conditioned 15 days at 23°C - 50% RH; ISO 527 | ||
| Tensile Strength, Yield | 41.0 MPa | 5950 psi | Conditioned 15 days at 23°C - 50% RH; ISO 527 | ||
| Elongation at Break | <= 200 % | <= 200 % | Conditioned 15 days at 23°C - 50% RH; ISO 527 | ||
| Elongation at Yield | 5.0 % | 5.0 % | Conditioned 15 days at 23°C - 50% RH; ISO 527 | ||
| Tensile Modulus | 1.28 GPa | 186 ksi | Conditioned 15 days at 23°C - 50% RH; ISO 527 | ||
| Flexural Modulus | 1.14 GPa | 165 ksi | Conditioned 15 days at 23°C - 50% RH; ISO 178 | ||
| Charpy Impact Unnotched | NB @Temperature -30.0 °C | NB @Temperature -22.0 °F | ISO 179 | ||
| NB @Temperature 23.0 °C | NB @Temperature 73.4 °F | ISO 179 | |||
| Charpy Impact, Notched | 1.00 J/cm² @Temperature -30.0 °C | 4.76 ft-lb/in² @Temperature -22.0 °F | ISO 179 | ||
| 2.00 J/cm² @Temperature 23.0 °C | 9.52 ft-lb/in² @Temperature 73.4 °F | ISO 179 | |||
| Thermal Properties | Metric | English | Comments | ||
| Melting Point | 189 °C | 372 °F | ISO 11357 | ||
| Deflection Temperature at 0.46 MPa (66 psi) | 145 °C | 293 °F | ISO 75 | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 50.0 °C | 122 °F | ISO 75 | ||
| Processing Properties | Metric | English | Comments | ||
| Nozzle Temperature | 240 - 290 °C | 464 - 554 °F | |||
| 270 °C | 518 °F | Recommended | |||
| Mold Temperature | 25.0 - 60.0 °C | 77.0 - 140 °F | |||
| Drying Temperature | 80.0 °C | 176 °F | |||
| Dry Time | 4.00 - 6.00 hour | 4.00 - 6.00 hour | |||
| Descriptive Properties | |||||
| Bio Based Carbon | 100% | ASTM 6866, Calculation | |||