- 拉伸强度 [MPa]: 5.86
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.19 g/cc | 1.19 g/cc | ASTM D792 |
| Linear Mold Shrinkage | 0.0113 cm/cm | 0.0113 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Shore A | 64 | 64 | Instant; ASTM D2240 |
| Tensile Strength, Yield | 5.86 MPa | 850 psi | Method A (Dumbbell & Section), 20 in/min, Break; ASTM D412 |
| 3.31 MPa @Strain 300 % | 480 psi @Strain 300 % | Method A (Dumbbell & Section), 20 in/min; ASTM D412 | |
| Elongation at Break | 665 % | 665 % | Method A (Dumbbell & Section), 20 in/min; ASTM D412 |
| Tear Strength | 24.5 kN/m | 140 pli | Die C (graves), 20 in/min; ASTM D624 |
| Compression Set | 25 % | 25 % | Method B, 73°F(23°C), 22 hrs; ASTM D395 |
| 35 % | 35 % | Method B, 104°F(40°C), 22 hrs; ASTM D395 | |