- 拉伸强度 [MPa]: 7.65
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 0.960 g/cc | 0.960 g/cc | ASTM D792 |
| Linear Mold Shrinkage | 0.020 cm/cm | 0.020 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Shore A | 43 | 43 | 5 sec; ASTM D2240 |
| Tensile Strength, Yield | 7.65 MPa | 1110 psi | Method A (Dumbbell & Section), 20 in/min, Break; ASTM D412 |
| 1.86 MPa @Strain 100 % | 270 psi @Strain 100 % | Method A (Dumbbell & Section), 20 in/min; ASTM D412 | |
| 3.72 MPa @Strain 300 % | 540 psi @Strain 300 % | Method A (Dumbbell & Section), 20 in/min; ASTM D412 | |
| Elongation at Break | 740 % | 740 % | Method A (Dumbbell & Section), 20 in/min; ASTM D412 |
| Tear Strength | 29.8 kN/m | 170 pli | Die C (graves), 20 in/min; ASTM D624 |