Kraiburg TPE THERMOLAST® K TF7GMA Thermoplastic Elastomer, Conforming to FDA, adhesion to SAN, ASA, 物性表参数

Kraiburg TPE THERMOLAST® K TF7GMA Thermoplastic Elastomer, Conforming to FDA, adhesion to SAN, ASA,

Kraiburg TPE THERMOLAST® K TF7GMA Thermoplastic Elastomer, Conforming to FDA, adhesion to SAN, ASA, 物性表: Kraiburg TPE THERMOLAST® K TF7GMA Thermoplastic Elastomer, Conforming to FDA, adhesion to SAN, ASA, 物性表及特性介绍,Kraiburg TPE THERMOLAST® K TF7GMA Thermoplastic Elastomer, Conforming to FDA, adhesion to SAN, ASA, 注塑参数详情,如需Kraiburg TPE THERMOLAST® K TF7GMA Thermoplastic Elastomer, Conforming to FDA, adhesion to SAN, ASA, 下载, 可到相关下载区下载

密度 [g/cm3]: 1.1

Physical Properties	Metric	English	Comments

Density	1.10 g/cc	0.0397 lb/in³	DIN EN ISO 1183-1:2004

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	70	70	DIN 53505 / ISO 868
Tensile Strength at Break	8.20 MPa	1190 psi	Deviating from ISO 37 standard test piece is tested with a traverse speed of 200 mm/min; DIN 53504 / ISO 37
Elongation at Break	580 %	580 %	Deviating from ISO 37 standard test piece is tested with a traverse speed of 200 mm/min; DIN 53504 / ISO 37
Peel Strength	1.00 kN/m	5.71 pli	to PET; Renault test D41 1916
	2.00 kN/m	11.4 pli	to PMMA; Renault test D41 1916
	14.0 kN/m	79.9 pli	to ASA; Renault test D41 1916
	16.0 kN/m	91.3 pli	to SAN; Renault test D41 1916
Graves Tear Strength	17.3 kN/m	98.7 pli	DIN ISO 34-1 Method B (b)

Thermal Properties	Metric	English	Comments
Maximum Service Temperature, Air	80.0 °C	176 °F
Minimum Service Temperature, Air	-40.0 °C	-40.0 °F

Processing Properties	Metric	English	Comments
Processing Temperature	180 - 220 °C	356 - 428 °F
Drying Temperature	80.0 °C @Time 7200 sec	176 °F @Time 2.00 hour

Descriptive Properties
Color	Natural

关键词:
ASA
TPE
供应
Adhesion to SAN
Conforming to FDA
Kraiburg TPE THERMOLAST® K TF7GMA Thermoplastic Elastomer

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-48796.html

免责声明: 本文 Kraiburg TPE THERMOLAST® K TF7GMA Thermoplastic Elastomer, Conforming to FDA, adhesion to SAN, ASA, 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络