Ensinger Tecapeek® XP-111 Compression Molded PEEK Compound, 50% Carbon Fiber物性表参数

Ensinger Tecapeek® XP-111 Compression Molded PEEK Compound, 50% Carbon Fiber

Ensinger Tecapeek® XP-111 Compression Molded PEEK Compound, 50% Carbon Fiber 物性表: Ensinger Tecapeek® XP-111 Compression Molded PEEK Compound, 50% Carbon Fiber物性表及特性介绍,Ensinger Tecapeek® XP-111 Compression Molded PEEK Compound, 50% Carbon Fiber注塑参数详情,如需Ensinger Tecapeek® XP-111 Compression Molded PEEK Compound, 50% Carbon Fiber下载, 可到相关下载区下载

密度 [g/cm3]: 1.49
吸水率 [%]: 0.13
缺口冲击强度: 0.742
弯曲模量 [MPa]: 17.9

Physical Properties	Metric	English	Comments

Density	1.49 g/cc	0.0538 lb/in³	ASTM D792
Filler Content	50 %	50 %
Water Absorption	0.13 % @Time 86400 sec	0.13 % @Time 24.0 hour	ASTM D570
Crystallinity	17 %	17 %

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	110	110	ASTM D785
Tensile Strength	129 MPa	18700 psi	ASTM D638
Elongation at Break	1.1 %	1.1 %	ASTM D638
	1.5 %	1.5 %	Flexural Strain; ASTM D790
Tensile Modulus	17.9 GPa	2600 ksi	ASTM D638
Flexural Strength	214 MPa	31000 psi	ASTM D790
Flexural Modulus	17.9 GPa	2600 ksi	ASTM D790
Compressive Strength	276 MPa	40000 psi	10% Deformation; ASTM D695
Compressive Modulus	4.90 GPa	710 ksi	ASTM D695
Izod Impact, Notched	0.742 J/cm	1.39 ft-lb/in	ASTM D256

Thermal Properties	Metric	English	Comments
Melting Point	343 °C	649 °F	DSC

Descriptive Properties
Color	Black

关键词:
PEEK
供应
Ensinger Tecapeek® XP-111 Compression Molded PEEK Compound
50% Carbon Fiber

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-49800.html

免责声明: 本文 Ensinger Tecapeek® XP-111 Compression Molded PEEK Compound, 50% Carbon Fiber 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络