Lehmann & Voss LUVOCOM® 1105/GY7993 PEEK, unreinforced

Lehmann & Voss LUVOCOM® 1105/GY7993 PEEK, unreinforced 物性表: Lehmann & Voss LUVOCOM® 1105/GY7993 PEEK, unreinforced物性表及特性介绍,Lehmann & Voss LUVOCOM® 1105/GY7993 PEEK, unreinforced注塑参数详情,如需Lehmann & Voss LUVOCOM® 1105/GY7993 PEEK, unreinforced下载, 可到相关下载区下载
  • 熔体流动速率 [g/10min]: 87.1
  • 弯曲模量 [MPa]: 2.50
 
Physical PropertiesMetricEnglishComments
Specific Gravity 1.34 g/cc1.34 g/ccISO 1183
Water Absorption <= 0.50 %<= 0.50 %23°C/24h
Linear Mold Shrinkage 0.010 - 0.016 cm/cm0.010 - 0.016 in/in
Melt Flow 87.1 g/10 min
@Load 10.0 kg,
Temperature 380 °C
87.1 g/10 min
@Load 22.0 lb,
Temperature 716 °F
 
Mechanical PropertiesMetricEnglishComments
Tensile Stress 100 MPa14500 psi
Elongation at Yield 4.0 %4.0 %
 5.0 %5.0 %flexural
Modulus of Elasticity 3.50 GPa508 ksi
Flexural Strength 140 MPa20300 psi
Flexural Modulus 2.50 GPa363 ksi
 
Electrical PropertiesMetricEnglishComments
Insulation Resistance >= 1.00e+12 ohm>= 1.00e+12 ohm
 
Thermal PropertiesMetricEnglishComments
Maximum Service Temperature, Air 250 °C482 °F
 260 °C500 °Fshort term
Flammability, UL94 V-0V-0not recognized by UL
 
Processing PropertiesMetricEnglishComments
Processing Temperature 390 °C734 °Fmass temp
Nozzle Temperature 360 - 380 °C680 - 716 °F
Zone 1 360 - 370 °C680 - 698 °F
Zone 2 380 - 390 °C716 - 734 °F
Zone 3 390 - 400 °C734 - 752 °F
Mold Temperature 170 - 200 °C338 - 392 °F
Drying Temperature  120 °C
@Time 21600 - 28800 sec
248 °F
@Time 6.00 - 8.00 hour
or
 150 °C
@Time 10800 - 21600 sec
302 °F
@Time 3.00 - 6.00 hour
Dehumidifying dryer
 
Descriptive Properties
Colorgrey

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-49919.html

免责声明: 本文 Lehmann & Voss LUVOCOM® 1105/GY7993 PEEK, unreinforced 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4