SABIC Innovative Plastics LNP THERMOCOMP LF006 PEEK (Europe-Africa-Middle East)

SABIC Innovative Plastics LNP THERMOCOMP LF006 PEEK (Europe-Africa-Middle East) 物性表: SABIC Innovative Plastics LNP THERMOCOMP LF006 PEEK (Europe-Africa-Middle East)物性表及特性介绍,SABIC Innovative Plastics LNP THERMOCOMP LF006 PEEK (Europe-Africa-Middle East)注塑参数详情,如需SABIC Innovative Plastics LNP THERMOCOMP LF006 PEEK (Europe-Africa-Middle East)下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.51
  • 缺口冲击强度: 9.0
  • 断裂伸长率 [%]: 217
  • 弯曲模量 [MPa]: 10.2
 
Physical PropertiesMetricEnglishComments
Density 1.51 g/cc0.0546 lb/in³ISO 1183
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength at Break 152 MPa22000 psi5 mm/min; ISO 527
Elongation at Break 1.9 %1.9 %5 mm/min; ISO 527
Tensile Modulus 11.1 GPa1610 ksi1 mm/min; ISO 527
Flexural Yield Strength 217 MPa31500 psi2 mm/min; ISO 178
Flexural Modulus 10.2 GPa1480 ksi2 mm/min; ISO 178
Izod Impact, Notched (ISO) 9.00 kJ/m²4.28 ft-lb/in²80*10*4; ISO 180/1A
Izod Impact, Unnotched (ISO) 45.0 kJ/m²21.4 ft-lb/in²80*10*4; ISO 180/1U
 
Thermal PropertiesMetricEnglishComments
CTE, linear, Parallel to Flow 20.0 µm/m-°C
@Temperature 23.0 - 60.0 °C
11.1 µin/in-°F
@Temperature 73.4 - 140 °F
ISO 11359-2
CTE, linear, Transverse to Flow 46.0 µm/m-°C
@Temperature 23.0 - 60.0 °C
25.6 µin/in-°F
@Temperature 73.4 - 140 °F
ISO 11359-2
Deflection Temperature at 1.8 MPa (264 psi) >= 280 °C>= 536 °FFlatw 80*10*4 sp=64mm; ISO 75/Af
Flammability, UL94 V-0
@Thickness 0.780 mm
V-0
@Thickness 0.0307 in
UL 94

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-50269.html

免责声明: 本文 SABIC Innovative Plastics LNP THERMOCOMP LF006 PEEK (Europe-Africa-Middle East) 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4