- 弯曲强度 [MPa]: 4.72
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Specific Gravity | 2.80 g/cc | 2.80 g/cc | silicone property; Arlon SQA-TMS-024 | ||
| Thickness | 76.2 microns | 3.00 mil | side 1; Arlon SQA-TMS-003 | ||
| 229 microns | 9.00 mil | side 2; Arlon SQA-TMS-003 | |||
| 457 microns | 18.0 mil | substrate; Arlon SQA-TMS-003 | |||
| 762 microns | 30.0 mil | overall; Arlon SQA-TMS-003 | |||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Shore A | 77 | 77 | silicone property; ASTM D2240 | ||
| Tensile Strength, Ultimate | 4.72 MPa | 685 psi | silicone property; ASTM D412 | ||
| Elongation at Break | 125 % | 125 % | silicone property; ASTM D412 | ||
| Modulus of Elasticity | 0.0245 GPa | 3.55 ksi | Arlon SQA-TMS-008 | ||
| Poissons Ratio | 0.50 | 0.50 | |||
| Adhesive Bond Strength | 0.0241 MPa | 3.50 psi | Arlon SQA-TMS-011 | ||
| Electrical Properties | Metric | English | Comments | ||
| Dielectric Constant | 6.91 @Frequency 1.00e+6 Hz | 6.91 @Frequency 1.00e+6 Hz | silicone property; IPC TM 650-2.5.5.3 | ||
| Dielectric Strength | 17.7 kV/mm | 450 kV/in | ASTM D149 | ||
| Dissipation Factor | 0.0044 @Frequency 1.00e+6 Hz | 0.0044 @Frequency 1.00e+6 Hz | silicone property; IPC TM 650-2.5.5.3 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear | 111 µm/m-°C @Temperature 20.0 °C | 61.7 µin/in-°F @Temperature 68.0 °F | silicone property; ASTM E 831 | ||
| Specific Heat Capacity | 0.820 J/g-°C @Temperature 100 °C | 0.196 BTU/lb-°F @Temperature 212 °F | silicone property; Arlon SQA-TMS-052 | ||
| Thermal Conductivity | 1.40 W/m-K | 9.72 BTU-in/hr-ft²-°F | silicone property; ASTM E1530 | ||
| 1.54 W/m-K @Temperature 100 °C | 10.7 BTU-in/hr-ft²-°F @Temperature 212 °F | overall; Arlon SQA-TMS-054 | |||
| Maximum Service Temperature, Air | 200 °C | 392 °F | |||
| Minimum Service Temperature, Air | -100 °C | -148 °F | |||
| Glass Transition Temp, Tg | -118 °C | -180 °F | silicone property; ASTM D3418 | ||
| Flammability, UL94 | V-0 | V-0 | |||
| Processing Properties | Metric | English | Comments | ||
| Cure Time | 15.0 min @Temperature 121 °C | 0.250 hour @Temperature 250 °F | |||
| 120 min @Temperature 200 °C | 2.00 hour @Temperature 392 °F | ||||
| Shelf Life | 6.00 Month @Temperature 7.22 °C | 6.00 Month @Temperature 45.0 °F | |||
| Descriptive Properties | |||||
| Color | Gray | ||||
| Plasticity (mm) Arlon SQA-TMS-005 | silicone property | ||||