塑胶原料之家
  1. 首页
  2. 资讯
  3. 产品资讯
  4. PA66 BK061 Nylon66 吸水率2.5%

PA66 BK061 Nylon66 吸水率2.5%

PA66 10B140 BK061 Nylon 66的收缩率在1%~2%之间，PA66 10B140 BK061加入玻璃纤维添加剂可以将收缩率降低到0.2%~1% 。PA66 10B140 BK061收缩率在流程方向和与流程方向相垂直方向上的相异是较大的。PA66对许多溶剂具有抗溶性，但对酸和其它一些氯化剂的抵抗力较弱。
 PA66 10B140 BK061 Nylon 66聚酰胺66或尼龙66化学和物理特性PA66在聚酰胺材料中有较高的熔点。它是一种半晶体-晶体材料。PA66在较高温度也能保持较强的强度和刚度。在产品设计时，一定要考虑吸湿性对几何稳定性的影响。为了提高PA66的机械特性，经常加入各种各样的改性剂。玻璃就是最常见的添加剂，有时为了提高抗冲击性还加入合成橡胶，如EPDM和SBR等。 PA66的粘性较低，因此流动性很好（但不如PA6）。
 物性表：
Physical Properties Metric English Comments
Density  1.28 g/cc 0.0462 lb/in³  
  1.50 g/cc 0.0542 lb/in³ DAM; ISO 1183
Water Absorption  5.0 %
@Thickness 2.00 mm		 5.0 %
@Thickness 0.0787 in		 DAM; Sim. to ISO 62
Moisture Absorption  1.60 %
@Thickness 2.00 mm		 1.60 %
@Thickness 0.0787 in		 DAM; Sim. to ISO 62
Viscosity   29000 cP
@Shear Rate 5000 1/s,
Temperature 315 °C		 29000 cP
@Shear Rate 5000 1/s,
Temperature 599 °F		 ISO 11403-1 -2
  52000 cP
@Shear Rate 5000 1/s,
Temperature 295 °C		 52000 cP
@Shear Rate 5000 1/s,
Temperature 563 °F		 ISO 11403-1 -2
  61000 cP
@Shear Rate 500 1/s,
Temperature 315 °C		 61000 cP
@Shear Rate 500 1/s,
Temperature 599 °F		 ISO 11403-1 -2
  96000 cP
@Shear Rate 5000 1/s,
Temperature 275 °C		 96000 cP
@Shear Rate 5000 1/s,
Temperature 527 °F		 ISO 11403-1 -2
  112000 cP
@Shear Rate 500 1/s,
Temperature 295 °C		 112000 cP
@Shear Rate 500 1/s,
Temperature 563 °F		 ISO 11403-1 -2
  217000 cP
@Shear Rate 500 1/s,
Temperature 275 °C		 217000 cP
@Shear Rate 500 1/s,
Temperature 527 °F		 ISO 11403-1 -2
Viscosity Test  150 cm³/g 150 cm³/g DAM; ISO 307 1157 1628
Linear Mold Shrinkage, Flow  0.010 cm/cm 0.010 in/in DAM; ISO 294-4 2577
Linear Mold Shrinkage, Transverse  0.011 cm/cm 0.011 in/in DAM; ISO 294-4 2577
 
Mechanical Properties Metric English Comments
Tensile Strength at Break  54.0 MPa 7830 psi 50%RH; ISO 527-1/-2
  82.0 MPa 11900 psi DAM; ISO 527-1/-2
Tensile Stress   14.5 MPa
@Strain 1.33 %,
Temperature 90.0 °C		 2100 psi
@Strain 1.33 %,
Temperature 194 °F		 50%RH; ISO 11403-1 -2
  18.0 MPa
@Strain 1.63 %,
Temperature 90.0 °C		 2610 psi
@Strain 1.63 %,
Temperature 194 °F		 DAM; ISO 11403-1 -2
  19.0 MPa
@Strain 0.160 %,
Temperature -20.0 °C		 2760 psi
@Strain 0.160 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
  21.0 MPa
@Strain 1.20 %,
Temperature 40.0 °C		 3050 psi
@Strain 1.20 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  22.0 MPa
@Strain 0.280 %,
Temperature 23.0 °C		 3190 psi
@Strain 0.280 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  22.7 MPa
@Strain 0.250 %,
Temperature 0.000 °C		 3290 psi
@Strain 0.250 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  28.0 MPa
@Strain 0.380 %,
Temperature 0.000 °C		 4060 psi
@Strain 0.380 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  30.0 MPa
@Strain 0.940 %,
Temperature 23.0 °C		 4350 psi
@Strain 0.940 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  31.9 MPa
@Strain 5.32 %,
Temperature 90.0 °C		 4630 psi
@Strain 5.32 %,
Temperature 194 °F		 50%RH; ISO 11403-1 -2
  33.0 MPa
@Strain 0.430 %,
Temperature -20.0 °C		 4790 psi
@Strain 0.430 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  35.0 MPa
@Strain 0.520 %,
Temperature 40.0 °C		 5080 psi
@Strain 0.520 %,
Temperature 104 °F		 DAM; ISO 11403-1 -2
  35.4 MPa
@Strain 9.31 %,
Temperature 90.0 °C		 5130 psi
@Strain 9.31 %,
Temperature 194 °F		 50%RH; ISO 11403-1 -2
  36.8 MPa
@Strain 6.52 %,
Temperature 90.0 °C		 5340 psi
@Strain 6.52 %,
Temperature 194 °F		 DAM; ISO 11403-1 -2
  41.1 MPa
@Strain 11.4 %,
Temperature 90.0 °C		 5960 psi
@Strain 11.4 %,
Temperature 194 °F		 DAM; ISO 11403-1 -2
  44.3 MPa
@Strain 4.80 %,
Temperature 40.0 °C		 6430 psi
@Strain 4.80 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  49.0 MPa
@Strain 8.40 %,
Temperature 40.0 °C		 7110 psi
@Strain 8.40 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  55.7 MPa
@Strain 3.76 %,
Temperature 23.0 °C		 8080 psi
@Strain 3.76 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  58.7 MPa
@Strain 6.58 %,
Temperature 23.0 °C		 8510 psi
@Strain 6.58 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  64.1 MPa
@Strain 1.52 %,
Temperature 0.000 °C		 9300 psi
@Strain 1.52 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  65.1 MPa
@Strain 0.800 %,
Temperature -20.0 °C		 9440 psi
@Strain 0.800 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
  66.1 MPa
@Strain 1.12 %,
Temperature 23.0 °C		 9590 psi
@Strain 1.12 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  66.7 MPa
@Strain 2.08 %,
Temperature 40.0 °C		 9670 psi
@Strain 2.08 %,
Temperature 104 °F		 DAM; ISO 11403-1 -2
  67.5 MPa
@Strain 1.00 %,
Temperature 0.000 °C		 9790 psi
@Strain 1.00 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  72.0 MPa
@Strain 1.72 %,
Temperature -20.0 °C		 10400 psi
@Strain 1.72 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  75.6 MPa
@Strain 2.66 %,
Temperature 0.000 °C		 11000 psi
@Strain 2.66 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  77.6 MPa
@Strain 3.80 %,
Temperature 0.000 °C		 11300 psi
@Strain 3.80 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  81.6 MPa
@Strain 3.01 %,
Temperature -20.0 °C		 11800 psi
@Strain 3.01 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  87.0 MPa
@Strain 1.75 %,
Temperature 0.000 °C		 12600 psi
@Strain 1.75 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  87.3 MPa
@Strain 1.96 %,
Temperature 23.0 °C		 12700 psi
@Strain 1.96 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  88.3 MPa
@Strain 1.28 %,
Temperature -20.0 °C		 12800 psi
@Strain 1.28 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
  92.6 MPa
@Strain 2.80 %,
Temperature 23.0 °C		 13400 psi
@Strain 2.80 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  96.5 MPa
@Strain 2.50 %,
Temperature 0.000 °C		 14000 psi
@Strain 2.50 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  4.00 MPa
@Strain 0.190 %,
Time 3600 sec		 580 psi
@Strain 0.190 %,
Time 1.00 hour		 50%RH; isochronous; ISO 11403-1 -2
  4.00 MPa
@Strain 0.230 %,
Time 36000 sec		 580 psi
@Strain 0.230 %,
Time 10.0 hour		 50%RH; isochronous; ISO 11403-1 -2
  4.00 MPa
@Strain 0.260 %,
Time 360000 sec		 580 psi
@Strain 0.260 %,
Time 100 hour		 50%RH; isochronous; ISO 11403-1 -2
  4.00 MPa
@Strain 0.350 %,
Time 3.60e+7 sec		 580 psi
@Strain 0.350 %,
Time 10000 hour		 50%RH; isochronous; ISO 11403-1 -2
  4.00 MPa
@Strain 0.300 %,
Time 3.60e+6 sec		 580 psi
@Strain 0.300 %,
Time 1000 hour		 50%RH; isochronous; ISO 11403-1 -2
  15.0 MPa
@Strain 1.39 %,
Time 3.60e+6 sec		 2180 psi
@Strain 1.39 %,
Time 1000 hour		 50%RH; isochronous; ISO 11403-1 -2
  15.0 MPa
@Strain 1.68 %,
Time 3.60e+7 sec		 2180 psi
@Strain 1.68 %,
Time 10000 hour		 50%RH; isochronous; ISO 11403-1 -2
  15.0 MPa
@Strain 1.14 %,
Time 360000 sec		 2180 psi
@Strain 1.14 %,
Time 100 hour		 50%RH; isochronous; ISO 11403-1 -2
  15.0 MPa
@Strain 0.970 %,
Time 36000 sec		 2180 psi
@Strain 0.970 %,
Time 10.0 hour		 50%RH; isochronous; ISO 11403-1 -2
  15.0 MPa
@Strain 0.780 %,
Time 3600 sec		 2180 psi
@Strain 0.780 %,
Time 1.00 hour		 50%RH; isochronous; ISO 11403-1 -2
Elongation at Break  3.5 % 3.5 % DAM; ISO 527-1/-2
  9.0 % 9.0 % 50%RH; ISO 527-1/-2
Tensile Modulus  3.80 GPa 551 ksi 50%RH; ISO 527-1/-2
  6.60 GPa 957 ksi DAM; ISO 527-1/-2
Shear Modulus  0.399 GPa
@Temperature 160 °C		 57.9 ksi
@Temperature 320 °F		 50%RH; Dynamic; ISO 11403-1 -2
  0.407 GPa
@Temperature 160 °C		 59.0 ksi
@Temperature 320 °F		 DAM; Dynamic; ISO 11403-1 -2
  0.500 GPa
@Temperature 120 °C		 72.5 ksi
@Temperature 248 °F		 50%RH; Dynamic; ISO 11403-1 -2
  0.505 GPa
@Temperature 120 °C		 73.2 ksi
@Temperature 248 °F		 DAM; Dynamic; ISO 11403-1 -2
  1.009 GPa
@Temperature 70.0 °C		 146.3 ksi
@Temperature 158 °F		 DAM; Dynamic; ISO 11403-1 -2
  1.19 GPa
@Temperature 70.0 °C		 173 ksi
@Temperature 158 °F		 50%RH; Dynamic; ISO 11403-1 -2
  2.26 GPa
@Temperature 20.0 °C		 328 ksi
@Temperature 68.0 °F		 50%RH; Dynamic; ISO 11403-1 -2
  2.329 GPa
@Temperature 20.0 °C		 337.8 ksi
@Temperature 68.0 °F		 DAM; Dynamic; ISO 11403-1 -2
  2.41 GPa
@Temperature -20.0 °C		 350 ksi
@Temperature -4.00 °F		 50%RH; Dynamic; ISO 11403-1 -2
  2.504 GPa
@Temperature -20.0 °C		 363.2 ksi
@Temperature -4.00 °F		 DAM; Dynamic; ISO 11403-1 -2
  2.55 GPa
@Temperature -50.0 °C		 370 ksi
@Temperature -58.0 °F		 50%RH; Dynamic; ISO 11403-1 -2
  2.692 GPa
@Temperature -50.0 °C		 390.4 ksi
@Temperature -58.0 °F		 DAM; Dynamic; ISO 11403-1 -2
Shear Strength  0.0305 MPa
@Shear Rate 500 1/s,
Temperature 315 °C		 4.42 psi
@Shear Rate 500 1/s,
Temperature 599 °F		 ISO 11403-1 -2
  0.0560 MPa
@Shear Rate 500 1/s,
Temperature 295 °C		 8.12 psi
@Shear Rate 500 1/s,
Temperature 563 °F		 ISO 11403-1 -2
  0.1085 MPa
@Shear Rate 500 1/s,
Temperature 275 °C		 15.74 psi
@Shear Rate 500 1/s,
Temperature 527 °F		 ISO 11403-1 -2
Secant Modulus  0.922917 GPa
@Strain 4.80 %,
Temperature 40.0 °C		 133.860 ksi
@Strain 4.80 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  1.48138 GPa
@Strain 3.76 %,
Temperature 23.0 °C		 214.859 ksi
@Strain 3.76 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1.75 GPa
@Strain 1.20 %,
Temperature 40.0 °C		 254 ksi
@Strain 1.20 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  2.52303 GPa
@Strain 3.04 %,
Temperature 0.000 °C		 365.940 ksi
@Strain 3.04 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  3.19149 GPa
@Strain 0.940 %,
Temperature 23.0 °C		 462.894 ksi
@Strain 0.940 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  3.20673 GPa
@Strain 2.08 %,
Temperature 40.0 °C		 465.104 ksi
@Strain 2.08 %,
Temperature 104 °F		 DAM; ISO 11403-1 -2
  4.03571 GPa
@Strain 2.24 %,
Temperature 23.0 °C		 585.339 ksi
@Strain 2.24 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  4.18605 GPa
@Strain 1.72 %,
Temperature -20.0 °C		 607.145 ksi
@Strain 1.72 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  4.21711 GPa
@Strain 1.52 %,
Temperature 0.000 °C		 611.650 ksi
@Strain 1.52 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  4.545 GPa
@Strain 2.00 %,
Temperature 0.000 °C		 659.2 ksi
@Strain 2.00 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  5.90179 GPa
@Strain 1.12 %,
Temperature 23.0 °C		 855.996 ksi
@Strain 1.12 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  6.59722 GPa
@Strain 1.44 %,
Temperature -20.0 °C		 956.861 ksi
@Strain 1.44 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
  6.73077 GPa
@Strain 0.520 %,
Temperature 40.0 °C		 976.231 ksi
@Strain 0.520 %,
Temperature 104 °F		 DAM; ISO 11403-1 -2
  6.75 GPa
@Strain 1.00 %,
Temperature 0.000 °C		 979 ksi
@Strain 1.00 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  7.36842 GPa
@Strain 0.380 %,
Temperature 0.000 °C		 1068.72 ksi
@Strain 0.380 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  7.67442 GPa
@Strain 0.430 %,
Temperature -20.0 °C		 1113.10 ksi
@Strain 0.430 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  7.85714 GPa
@Strain 0.280 %,
Temperature 23.0 °C		 1139.60 ksi
@Strain 0.280 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  8.1375 GPa
@Strain 0.800 %,
Temperature -20.0 °C		 1180.3 ksi
@Strain 0.800 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
  9.08 GPa
@Strain 0.250 %,
Temperature 0.000 °C		 1320 ksi
@Strain 0.250 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  11.875 GPa
@Strain 0.160 %,
Temperature -20.0 °C		 1722.3 ksi
@Strain 0.160 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
Izod Impact, Notched (ISO)  3.50 kJ/m² 1.67 ft-lb/in² DAM; ISO 180/1A
  4.00 kJ/m² 1.90 ft-lb/in² 50%RH; ISO 180/1A
Charpy Impact Unnotched  3.50 J/cm² 16.7 ft-lb/in² DAM; ISO 179/1eU
  6.00 J/cm² 28.6 ft-lb/in² 50%RH; ISO 179/1eU
  2.50 J/cm²
@Temperature -30.0 °C		 11.9 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 179/1eU
  2.50 J/cm²
@Temperature -30.0 °C		 11.9 ft-lb/in²
@Temperature -22.0 °F		 50%RH; ISO 179/1eU
Charpy Impact, Notched  0.350 J/cm² 1.67 ft-lb/in² DAM; ISO 179/1eA
  0.450 J/cm² 2.14 ft-lb/in² 50%RH; ISO 179/1eA
  0.200 J/cm²
@Temperature -30.0 °C		 0.952 ft-lb/in²
@Temperature -22.0 °F		 50%RH; ISO 179/1eA
  0.350 J/cm²
@Temperature -30.0 °C		 1.67 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 179/1eA
Tensile Creep Modulus, 1 hour  342.466 MPa
@Pressure 20.0 MPa,
Temperature 120 °C		 49670.6 psi
@Pressure 2900 psi,
Temperature 248 °F		 DAM; ISO 11403-1 -2
  493.421 MPa
@Pressure 15.0 MPa,
Temperature 120 °C		 71564.8 psi
@Pressure 2180 psi,
Temperature 248 °F		 DAM; ISO 11403-1 -2
  549.451 MPa
@Pressure 10.0 MPa,
Temperature 120 °C		 79691.3 psi
@Pressure 1450 psi,
Temperature 248 °F		 DAM; ISO 11403-1 -2
  621.708 MPa
@Pressure 14.0 MPa,
Temperature 100 °C		 90171.3 psi
@Pressure 2030 psi,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  632.178 MPa
@Pressure 12.0 MPa,
Temperature 100 °C		 91689.8 psi
@Pressure 1740 psi,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  641.708 MPa
@Pressure 10.0 MPa,
Temperature 100 °C		 93072.0 psi
@Pressure 1450 psi,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  647.361 MPa
@Pressure 18.0 MPa,
Temperature 90.0 °C		 93891.9 psi
@Pressure 2610 psi,
Temperature 194 °F		 DAM; ISO 11403-1 -2
  649.187 MPa
@Pressure 8.00 MPa,
Temperature 100 °C		 94156.8 psi
@Pressure 1160 psi,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  656.053 MPa
@Pressure 6.00 MPa,
Temperature 100 °C		 95152.6 psi
@Pressure 870 psi,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  661.046 MPa
@Pressure 4.00 MPa,
Temperature 100 °C		 95876.8 psi
@Pressure 580 psi,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  664.079 MPa
@Pressure 2.00 MPa,
Temperature 100 °C		 96316.7 psi
@Pressure 290 psi,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  666.667 MPa
@Pressure 5.00 MPa,
Temperature 120 °C		 96692.0 psi
@Pressure 725 psi,
Temperature 248 °F		 DAM; ISO 11403-1 -2
  666.954 MPa
@Pressure 15.0 MPa,
Temperature 90.0 °C		 96733.7 psi
@Pressure 2180 psi,
Temperature 194 °F		 DAM; ISO 11403-1 -2
  695.057 MPa
@Pressure 10.0 MPa,
Temperature 90.0 °C		 100810 psi
@Pressure 1450 psi,
Temperature 194 °F		 DAM; ISO 11403-1 -2
  713.622 MPa
@Pressure 5.00 MPa,
Temperature 90.0 °C		 103502 psi
@Pressure 725 psi,
Temperature 194 °F		 DAM; ISO 11403-1 -2
  970.841 MPa
@Pressure 20.0 MPa,
Temperature 60.0 °C		 140809 psi
@Pressure 2900 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  1023.87 MPa
@Pressure 15.0 MPa,
Temperature 60.0 °C		 148500 psi
@Pressure 2180 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  1067.24 MPa
@Pressure 10.0 MPa,
Temperature 60.0 °C		 154790 psi
@Pressure 1450 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  1095.74 MPa
@Pressure 5.00 MPa,
Temperature 60.0 °C		 158924 psi
@Pressure 725 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  1287.55 MPa
@Pressure 30.0 MPa,
Temperature 23.0 °C		 186744 psi
@Pressure 4350 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1481.1 MPa
@Pressure 25.0 MPa,
Temperature 23.0 °C		 214820 psi
@Pressure 3630 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1739.13 MPa
@Pressure 20.0 MPa,
Temperature 23.0 °C		 252240 psi
@Pressure 2900 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1923.08 MPa
@Pressure 15.0 MPa,
Temperature 23.0 °C		 278920 psi
@Pressure 2180 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2020.2 MPa
@Pressure 10.0 MPa,
Temperature 23.0 °C		 293010 psi
@Pressure 1450 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2093.6 MPa
@Pressure 5.00 MPa,
Temperature 23.0 °C		 303650 psi
@Pressure 725 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2100 MPa
@Time 3600 sec		 305000 psi
@Time 1.00 hour		 50%RH; ISO 899-1
Tensile Creep Modulus, 1000 hours    204.29 MPa
@Pressure 20.0 MPa,
Temperature 120 °C		 29630 psi
@Pressure 2900 psi,
Temperature 248 °F		 DAM; ISO 11403-1 -2
  364.078 MPa
@Pressure 15.0 MPa,
Temperature 120 °C		 52805.1 psi
@Pressure 2180 psi,
Temperature 248 °F		 DAM; ISO 11403-1 -2
  430.237 MPa
@Pressure 14.0 MPa,
Temperature 100 °C		 62400.7 psi
@Pressure 2030 psi,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  435.97 MPa
@Pressure 12.0 MPa,
Temperature 100 °C		 63232 psi
@Pressure 1740 psi,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  441.413 MPa
@Pressure 10.0 MPa,
Temperature 100 °C		 64021.7 psi
@Pressure 1450 psi,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  442.478 MPa
@Pressure 10.0 MPa,
Temperature 120 °C		 64176.1 psi
@Pressure 1450 psi,
Temperature 248 °F		 DAM; ISO 11403-1 -2
  444.442 MPa
@Pressure 8.00 MPa,
Temperature 100 °C		 64461.0 psi
@Pressure 1160 psi,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  447.514 MPa
@Pressure 6.00 MPa,
Temperature 100 °C		 64906.5 psi
@Pressure 870 psi,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  449.587 MPa
@Pressure 4.00 MPa,
Temperature 100 °C		 65207.2 psi
@Pressure 580 psi,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  451.678 MPa
@Pressure 2.00 MPa,
Temperature 100 °C		 65510.5 psi
@Pressure 290 psi,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  477.594 MPa
@Pressure 18.0 MPa,
Temperature 90.0 °C		 69269.3 psi
@Pressure 2610 psi,
Temperature 194 °F		 DAM; ISO 11403-1 -2
  489.554 MPa
@Pressure 15.0 MPa,
Temperature 90.0 °C		 71003.9 psi
@Pressure 2180 psi,
Temperature 194 °F		 DAM; ISO 11403-1 -2
  506.539 MPa
@Pressure 10.0 MPa,
Temperature 90.0 °C		 73467.4 psi
@Pressure 1450 psi,
Temperature 194 °F		 DAM; ISO 11403-1 -2
  514.876 MPa
@Pressure 5.00 MPa,
Temperature 90.0 °C		 74676.6 psi
@Pressure 725 psi,
Temperature 194 °F		 DAM; ISO 11403-1 -2
  519.309 MPa
@Pressure 20.0 MPa,
Temperature 60.0 °C		 75319.5 psi
@Pressure 2900 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  525.394 MPa
@Pressure 30.0 MPa,
Temperature 23.0 °C		 76202.1 psi
@Pressure 4350 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  542.488 MPa
@Pressure 15.0 MPa,
Temperature 60.0 °C		 78681.4 psi
@Pressure 2180 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  561.798 MPa
@Pressure 10.0 MPa,
Temperature 60.0 °C		 81482.1 psi
@Pressure 1450 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  568.182 MPa
@Pressure 5.00 MPa,
Temperature 120 °C		 82408.0 psi
@Pressure 725 psi,
Temperature 248 °F		 DAM; ISO 11403-1 -2
  571.1 MPa
@Pressure 5.00 MPa,
Temperature 60.0 °C		 82830 psi
@Pressure 725 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  699.302 MPa
@Pressure 25.0 MPa,
Temperature 23.0 °C		 101425 psi
@Pressure 3630 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  975.61 MPa
@Pressure 20.0 MPa,
Temperature 23.0 °C		 141500 psi
@Pressure 2900 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1079.14 MPa
@Pressure 15.0 MPa,
Temperature 23.0 °C		 156516 psi
@Pressure 2180 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1250 MPa
@Pressure 10.0 MPa,
Temperature 23.0 °C		 181000 psi
@Pressure 1450 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1324.14 MPa
@Pressure 5.00 MPa,
Temperature 23.0 °C		 192051 psi
@Pressure 725 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1300 MPa
@Time 3.60e+6 sec		 189000 psi
@Time 1000 hour		 50%RH; ISO 899-1
 
Electrical Properties Metric English Comments
Volume Resistivity  1.00e+12 ohm-cm 1.00e+12 ohm-cm 50%RH; IEC 60093
Surface Resistance  >= 1.00e+15 ohm >= 1.00e+15 ohm 50%RH; IEC 60093
Dielectric Constant  3.9
@Frequency 1.00e+6 Hz		 3.9
@Frequency 1.00e+6 Hz		 DAM; IEC 60250
  4.5
@Frequency 1.00e+6 Hz		 4.5
@Frequency 1.00e+6 Hz		 50%RH; IEC 60250
  4.5
@Frequency 100 Hz		 4.5
@Frequency 100 Hz		 DAM; IEC 60250
  9.4
@Frequency 100 Hz		 9.4
@Frequency 100 Hz		 50%RH; IEC 60250
Dielectric Strength  40.0 kV/mm 1020 kV/in DAM; IEC 60243-1
Dissipation Factor  0.011
@Frequency 100 Hz		 0.011
@Frequency 100 Hz		 DAM; IEC 60250
  0.023
@Frequency 1.00e+6 Hz		 0.023
@Frequency 1.00e+6 Hz		 DAM; IEC 60250
  0.055
@Frequency 1.00e+6 Hz		 0.055
@Frequency 1.00e+6 Hz		 50%RH; IEC 60250
  0.21
@Frequency 100 Hz		 0.21
@Frequency 100 Hz		 50%RH; IEC 60250
 
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow  65.0 µm/m-°C 36.1 µin/in-°F DAM; ISO 11359-1/-2
CTE, linear, Transverse to Flow  90.0 µm/m-°C 50.0 µin/in-°F DAM; ISO 11359-1/-2
Melting Point  263 °C 505 °F DAM; 10°C/min; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi)  240 °C 464 °F DAM; ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)  170 °C 338 °F DAM; ISO 75-1/-2
Vicat Softening Point  245 °C 473 °F DAM; 50°C/h 50N; ISO 306
Flammability, UL94    HB
@Thickness 1.50 mm		 HB
@Thickness 0.0591 in		 DAM; IEC 60695-11-10
  HB
@Thickness 0.700 mm		 HB
@Thickness 0.0276 in		 DAM; IEC 60695-11-10
 
Descriptive Properties
Additives Release agent  
Delivery form Pellets  
Part Marking Code >PA66-MD40< ISO 11469
Processing Injection Moulding  
Regional Availability Europe  
  Near East/Africa  
Resin Identification PA66-MD40  
UL recognition UL DAM
 
特性
 
1、具有优良的耐磨性、自润滑性，机械强度较高。但吸水性较大，因而尺寸稳定性较差
颗粒
 
2、PA66在较高温度也能保持较强的强度和刚度。PA66在成型后仍然具有吸湿性，其程度主要取决于材料的组成、壁厚以及环境条件。
 
3、在产品设计时，一定要考虑吸湿性对几何稳定性的影响。为了提高PA66的机械特性，经常加入各种各样的改性剂。玻璃就是最常见的添加剂，有时为了提高抗冲击性还加入合成橡胶，如EPDM和SBR等。PA66的粘性较低，因此流动性很好（但不如PA6）。这个性质可以用来加工很薄的元件。它的粘度对温度变化很敏感。
上海松翰塑化科技有限公司，供应原料，品质真实,物实价廉。
PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。
欢迎各位客户前来咨询：
联系人： 夏先生  
手  机：13501802636   
QQ    ：205730283  
邮 箱 ：205730283@qq.com 

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/news/

本文链接: http://www.su-jiao.com/news/show-25392.html

免责声明: 本文 PA66 BK061 Nylon66 吸水率2.5% 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他资讯信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4