塑胶原料之家
  1. 首页
  2. 资讯
  3. 产品资讯
  4. PA66 11C140 NC010 具高抗张强度

PA66 11C140 NC010 具高抗张强度

PA66 11C140 NC010 Nylon 66 PA66的收缩率在1%~2%之间，PA66 11C140 NC010 Nylon 66加入玻璃纤维添加剂可以将收缩率降低到0.2%~1% 。PA66 11C140 NC010 Nylon 66收缩率在流程方向和与流程方向相垂直方向上的相异是较大的。PA66对许多溶剂具有抗溶性，但对酸和其它一些氯化剂的抵抗力较弱。
 PA66 11C140 NC010 Nylon 66透明或不透明乳白色结晶形聚合物，具有可塑性。密度1．15g/cm3。熔点252℃。脆化温度-30℃。热分解温度大于350℃。 连续耐热80-120℃,平衡吸水率2．5%。能耐酸、碱、大多数无机盐水溶液、卤代烷、烃类、酯类、酮类等腐蚀。
 物性表：
Physical Properties Metric English Comments
Density  1.27 g/cc 0.0459 lb/in³  
  1.45 g/cc 0.0524 lb/in³ DAM; ISO 1183
Water Absorption  5.7 %
@Thickness 2.00 mm		 5.7 %
@Thickness 0.0787 in		 DAM; Sim. to ISO 62
Moisture Absorption  1.80 %
@Thickness 2.00 mm		 1.80 %
@Thickness 0.0787 in		 DAM; Sim. to ISO 62
Viscosity    61000 cP
@Shear Rate 5000 1/s,
Temperature 315 °C		 61000 cP
@Shear Rate 5000 1/s,
Temperature 599 °F		 ISO 11403-1 -2
  97000 cP
@Shear Rate 5000 1/s,
Temperature 295 °C		 97000 cP
@Shear Rate 5000 1/s,
Temperature 563 °F		 ISO 11403-1 -2
  119000 cP
@Shear Rate 500 1/s,
Temperature 315 °C		 119000 cP
@Shear Rate 500 1/s,
Temperature 599 °F		 ISO 11403-1 -2
  149000 cP
@Shear Rate 5000 1/s,
Temperature 275 °C		 149000 cP
@Shear Rate 5000 1/s,
Temperature 527 °F		 ISO 11403-1 -2
  244000 cP
@Shear Rate 500 1/s,
Temperature 295 °C		 244000 cP
@Shear Rate 500 1/s,
Temperature 563 °F		 ISO 11403-1 -2
  490000 cP
@Shear Rate 500 1/s,
Temperature 275 °C		 490000 cP
@Shear Rate 500 1/s,
Temperature 527 °F		 ISO 11403-1 -2
Viscosity Test  140 cm³/g 140 cm³/g DAM; ISO 307 1157 1628
Linear Mold Shrinkage, Flow  0.014 cm/cm 0.014 in/in DAM; ISO 294-4 2577
Linear Mold Shrinkage, Transverse  0.014 cm/cm 0.014 in/in DAM; ISO 294-4 2577
 
Mechanical Properties Metric English Comments
Hardness, Rockwell M  86 86 DAM; ISO 2039-2
Hardness, Rockwell R  120 120 DAM; ISO 2039-2
Tensile Strength at Break  60.0 MPa 8700 psi 50%RH; ISO 527-1/-2
  89.0 MPa 12900 psi DAM; ISO 527-1/-2
Tensile Stress    16.0 MPa
@Strain 3.03 %,
Temperature 90.0 °C		 2320 psi
@Strain 3.03 %,
Temperature 194 °F		 50%RH; ISO 11403-1 -2
  20.0 MPa
@Strain 3.36 %,
Temperature 90.0 °C		 2900 psi
@Strain 3.36 %,
Temperature 194 °F		 DAM; ISO 11403-1 -2
  25.0 MPa
@Strain 3.03 %,
Temperature 40.0 °C		 3630 psi
@Strain 3.03 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  27.1 MPa
@Strain 0.350 %,
Temperature 23.0 °C		 3930 psi
@Strain 0.350 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  30.0 MPa
@Strain 2.24 %,
Temperature 23.0 °C		 4350 psi
@Strain 2.24 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  31.2 MPa
@Strain 0.360 %,
Temperature 0.000 °C		 4530 psi
@Strain 0.360 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  33.8 MPa
@Strain 0.360 %,
Temperature -20.0 °C		 4900 psi
@Strain 0.360 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
  35.0 MPa
@Strain 12.1 %,
Temperature 90.0 °C		 5080 psi
@Strain 12.1 %,
Temperature 194 °F		 50%RH; ISO 11403-1 -2
  36.6 MPa
@Strain 21.2 %,
Temperature 90.0 °C		 5310 psi
@Strain 21.2 %,
Temperature 194 °F		 50%RH; ISO 11403-1 -2
  37.0 MPa
@Strain 1.26 %,
Temperature 40.0 °C		 5370 psi
@Strain 1.26 %,
Temperature 104 °F		 DAM; ISO 11403-1 -2
  40.8 MPa
@Strain 13.4 %,
Temperature 90.0 °C		 5920 psi
@Strain 13.4 %,
Temperature 194 °F		 DAM; ISO 11403-1 -2
  48.0 MPa
@Strain 1.33 %,
Temperature 0.000 °C		 6960 psi
@Strain 1.33 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  48.7 MPa
@Strain 12.1 %,
Temperature 40.0 °C		 7060 psi
@Strain 12.1 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  51.9 MPa
@Strain 24.2 %,
Temperature 40.0 °C		 7530 psi
@Strain 24.2 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  52.3 MPa
@Strain 1.39 %,
Temperature -20.0 °C		 7590 psi
@Strain 1.39 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  53.7 MPa
@Strain 8.96 %,
Temperature 23.0 °C		 7790 psi
@Strain 8.96 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  58.3 MPa
@Strain 15.7 %,
Temperature 23.0 °C		 8460 psi
@Strain 15.7 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  68.1 MPa
@Strain 5.04 %,
Temperature 40.0 °C		 9880 psi
@Strain 5.04 %,
Temperature 104 °F		 DAM; ISO 11403-1 -2
  70.0 MPa
@Strain 5.32 %,
Temperature 0.000 °C		 10200 psi
@Strain 5.32 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  70.6 MPa
@Strain 1.40 %,
Temperature 23.0 °C		 10200 psi
@Strain 1.40 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  74.5 MPa
@Strain 5.56 %,
Temperature -20.0 °C		 10800 psi
@Strain 5.56 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  74.7 MPa
@Strain 9.31 %,
Temperature 0.000 °C		 10800 psi
@Strain 9.31 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  78.0 MPa
@Strain 9.73 %,
Temperature -20.0 °C		 11300 psi
@Strain 9.73 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  82.1 MPa
@Strain 1.44 %,
Temperature 0.000 °C		 11900 psi
@Strain 1.44 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  86.1 MPa
@Strain 2.45 %,
Temperature 23.0 °C		 12500 psi
@Strain 2.45 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  91.9 MPa
@Strain 1.44 %,
Temperature -20.0 °C		 13300 psi
@Strain 1.44 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
  100 MPa
@Strain 2.52 %,
Temperature 0.000 °C		 14500 psi
@Strain 2.52 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  111 MPa
@Strain 2.52 %,
Temperature -20.0 °C		 16100 psi
@Strain 2.52 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
   1.50 MPa
@Strain 0.109 %,
Time 3600 sec		 218 psi
@Strain 0.109 %,
Time 1.00 hour		 50%RH; isochronous; ISO 11403-1 -2
  1.50 MPa
@Strain 0.123 %,
Time 36000 sec		 218 psi
@Strain 0.123 %,
Time 10.0 hour		 50%RH; isochronous; ISO 11403-1 -2
  1.50 MPa
@Strain 0.140 %,
Time 360000 sec		 218 psi
@Strain 0.140 %,
Time 100 hour		 50%RH; isochronous; ISO 11403-1 -2
  1.50 MPa
@Strain 0.168 %,
Time 3.60e+7 sec		 218 psi
@Strain 0.168 %,
Time 10000 hour		 50%RH; isochronous; ISO 11403-1 -2
  1.50 MPa
@Strain 0.154 %,
Time 3.60e+6 sec		 218 psi
@Strain 0.154 %,
Time 1000 hour		 50%RH; isochronous; ISO 11403-1 -2
  3.00 MPa
@Strain 0.138 %,
Time 3600 sec		 435 psi
@Strain 0.138 %,
Time 1.00 hour		 50%RH; isochronous; ISO 11403-1 -2
  3.00 MPa
@Strain 0.159 %,
Time 36000 sec		 435 psi
@Strain 0.159 %,
Time 10.0 hour		 50%RH; isochronous; ISO 11403-1 -2
  3.00 MPa
@Strain 0.184 %,
Time 360000 sec		 435 psi
@Strain 0.184 %,
Time 100 hour		 50%RH; isochronous; ISO 11403-1 -2
  3.00 MPa
@Strain 0.213 %,
Time 3.60e+6 sec		 435 psi
@Strain 0.213 %,
Time 1000 hour		 50%RH; isochronous; ISO 11403-1 -2
  3.00 MPa
@Strain 0.249 %,
Time 3.60e+7 sec		 435 psi
@Strain 0.249 %,
Time 10000 hour		 50%RH; isochronous; ISO 11403-1 -2
  8.00 MPa
@Strain 0.875 %,
Time 3.60e+6 sec		 1160 psi
@Strain 0.875 %,
Time 1000 hour		 50%RH; isochronous; ISO 11403-1 -2
  8.00 MPa
@Strain 0.952 %,
Time 3.60e+7 sec		 1160 psi
@Strain 0.952 %,
Time 10000 hour		 50%RH; isochronous; ISO 11403-1 -2
  8.00 MPa
@Strain 0.797 %,
Time 360000 sec		 1160 psi
@Strain 0.797 %,
Time 100 hour		 50%RH; isochronous; ISO 11403-1 -2
  8.00 MPa
@Strain 0.701 %,
Time 36000 sec		 1160 psi
@Strain 0.701 %,
Time 10.0 hour		 50%RH; isochronous; ISO 11403-1 -2
  8.00 MPa
@Strain 0.618 %,
Time 3600 sec		 1160 psi
@Strain 0.618 %,
Time 1.00 hour		 50%RH; isochronous; ISO 11403-1 -2
  12.0 MPa
@Strain 1.15 %,
Time 3.60e+7 sec		 1740 psi
@Strain 1.15 %,
Time 10000 hour		 50%RH; isochronous; ISO 11403-1 -2
  12.0 MPa
@Strain 0.982 %,
Time 3.60e+6 sec		 1740 psi
@Strain 0.982 %,
Time 1000 hour		 50%RH; isochronous; ISO 11403-1 -2
  12.0 MPa
@Strain 0.846 %,
Time 360000 sec		 1740 psi
@Strain 0.846 %,
Time 100 hour		 50%RH; isochronous; ISO 11403-1 -2
  12.0 MPa
@Strain 0.719 %,
Time 36000 sec		 1740 psi
@Strain 0.719 %,
Time 10.0 hour		 50%RH; isochronous; ISO 11403-1 -2
  12.0 MPa
@Strain 0.612 %,
Time 3600 sec		 1740 psi
@Strain 0.612 %,
Time 1.00 hour		 50%RH; isochronous; ISO 11403-1 -2
Elongation at Break  10 % 10 % DAM; ISO 527-1/-2
  24 % 24 % 50%RH; ISO 527-1/-2
Tensile Modulus  2.50 GPa 363 ksi 50%RH; ISO 527-1/-2
  5.80 GPa 841 ksi DAM; ISO 527-1/-2
   10.0 GPa
@Temperature 100 °C		 1450 ksi
@Temperature 212 °F		 DAM; ISO 11403-1 -2
  67.64 GPa
@Temperature -40.0 °C		 9810 ksi
@Temperature -40.0 °F		 DAM; ISO 11403-1 -2
Shear Modulus    0.275 GPa
@Temperature 160 °C		 39.9 ksi
@Temperature 320 °F		 DAM; Dynamic; ISO 11403-1 -2
  0.341 GPa
@Temperature 120 °C		 49.5 ksi
@Temperature 248 °F		 DAM; Dynamic; ISO 11403-1 -2
  0.518 GPa
@Temperature 70.0 °C		 75.1 ksi
@Temperature 158 °F		 DAM; Dynamic; ISO 11403-1 -2
  1.91 GPa
@Temperature 20.0 °C		 277 ksi
@Temperature 68.0 °F		 DAM; Dynamic; ISO 11403-1 -2
  2.12 GPa
@Temperature -20.0 °C		 307 ksi
@Temperature -4.00 °F		 DAM; Dynamic; ISO 11403-1 -2
  2.27 GPa
@Temperature -50.0 °C		 329 ksi
@Temperature -58.0 °F		 DAM; Dynamic; ISO 11403-1 -2
Shear Strength    0.0595 MPa
@Shear Rate 500 1/s,
Temperature 315 °C		 8.63 psi
@Shear Rate 500 1/s,
Temperature 599 °F		 ISO 11403-1 -2
  0.122 MPa
@Shear Rate 500 1/s,
Temperature 295 °C		 17.7 psi
@Shear Rate 500 1/s,
Temperature 563 °F		 ISO 11403-1 -2
  0.245 MPa
@Shear Rate 500 1/s,
Temperature 275 °C		 35.5 psi
@Shear Rate 500 1/s,
Temperature 527 °F		 ISO 11403-1 -2
Secant Modulus    0.402479 GPa
@Strain 12.1 %,
Temperature 40.0 °C		 58.3755 ksi
@Strain 12.1 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  0.59933 GPa
@Strain 8.96 %,
Temperature 23.0 °C		 86.927 ksi
@Strain 8.96 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  0.711321 GPa
@Strain 10.6 %,
Temperature 0.000 °C		 103.170 ksi
@Strain 10.6 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  0.825083 GPa
@Strain 3.03 %,
Temperature 40.0 °C		 119.670 ksi
@Strain 3.03 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  1.31579 GPa
@Strain 5.32 %,
Temperature 0.000 °C		 190.842 ksi
@Strain 5.32 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  1.33929 GPa
@Strain 2.24 %,
Temperature 23.0 °C		 194.251 ksi
@Strain 2.24 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1.33993 GPa
@Strain 5.56 %,
Temperature -20.0 °C		 194.343 ksi
@Strain 5.56 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  2.93651 GPa
@Strain 1.26 %,
Temperature 40.0 °C		 425.911 ksi
@Strain 1.26 %,
Temperature 104 °F		 DAM; ISO 11403-1 -2
  3.15357 GPa
@Strain 2.80 %,
Temperature 23.0 °C		 457.394 ksi
@Strain 2.80 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  3.54167 GPa
@Strain 2.88 %,
Temperature 0.000 °C		 513.684 ksi
@Strain 2.88 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  3.60902 GPa
@Strain 1.33 %,
Temperature 0.000 °C		 523.452 ksi
@Strain 1.33 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  3.76259 GPa
@Strain 1.39 %,
Temperature -20.0 °C		 545.726 ksi
@Strain 1.39 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  3.92361 GPa
@Strain 2.88 %,
Temperature -20.0 °C		 569.080 ksi
@Strain 2.88 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
  5.04286 GPa
@Strain 1.40 %,
Temperature 23.0 °C		 731.416 ksi
@Strain 1.40 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  5.70139 GPa
@Strain 1.44 %,
Temperature 0.000 °C		 826.930 ksi
@Strain 1.44 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  6.38194 GPa
@Strain 1.44 %,
Temperature -20.0 °C		 925.637 ksi
@Strain 1.44 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
  7.74286 GPa
@Strain 0.350 %,
Temperature 23.0 °C		 1123.02 ksi
@Strain 0.350 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  8.66667 GPa
@Strain 0.360 %,
Temperature 0.000 °C		 1257.01 ksi
@Strain 0.360 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  9.38889 GPa
@Strain 0.360 %,
Temperature -20.0 °C		 1361.76 ksi
@Strain 0.360 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
Izod Impact, Notched (ISO)  5.50 kJ/m² 2.62 ft-lb/in² DAM; ISO 180/1A
  9.00 kJ/m² 4.28 ft-lb/in² 50%RH; ISO 180/1A
   4.00 kJ/m²
@Temperature -30.0 °C		 1.90 ft-lb/in²
@Temperature -22.0 °F		 50%RH; ISO 180/1A
  4.00 kJ/m²
@Temperature -40.0 °C		 1.90 ft-lb/in²
@Temperature -40.0 °F		 DAM; ISO 180/1A
  4.50 kJ/m²
@Temperature -30.0 °C		 2.14 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 180/1A
Charpy Impact Unnotched  13.0 J/cm² 61.9 ft-lb/in² DAM; ISO 179/1eU
  NB NB 50%RH; ISO 179/1eU
   8.00 J/cm²
@Temperature -30.0 °C		 38.1 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 179/1eU
  8.00 J/cm²
@Temperature -30.0 °C		 38.1 ft-lb/in²
@Temperature -22.0 °F		 50%RH; ISO 179/1eU
Charpy Impact, Notched  0.600 J/cm² 2.86 ft-lb/in² DAM; ISO 179/1eA
  0.900 J/cm² 4.28 ft-lb/in² 50%RH; ISO 179/1eA
   0.400 J/cm²
@Temperature -30.0 °C		 1.90 ft-lb/in²
@Temperature -22.0 °F		 50%RH; ISO 179/1eA
  0.500 J/cm²
@Temperature -30.0 °C		 2.38 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 179/1eA
Tensile Creep Modulus, 1 hour    833.333 MPa
@Pressure 12.0 MPa,
Temperature 100 °C		 120865 psi
@Pressure 1740 psi,
Temperature 212 °F		 50%RH; ISO 11403-1 -2
  871.432 MPa
@Pressure 10.0 MPa,
Temperature 100 °C		 126391 psi
@Pressure 1450 psi,
Temperature 212 °F		 50%RH; ISO 11403-1 -2
  899.862 MPa
@Pressure 8.00 MPa,
Temperature 100 °C		 130514 psi
@Pressure 1160 psi,
Temperature 212 °F		 50%RH; ISO 11403-1 -2
  924.499 MPa
@Pressure 6.00 MPa,
Temperature 100 °C		 134087 psi
@Pressure 870 psi,
Temperature 212 °F		 50%RH; ISO 11403-1 -2
  941.931 MPa
@Pressure 4.00 MPa,
Temperature 100 °C		 136616 psi
@Pressure 580 psi,
Temperature 212 °F		 50%RH; ISO 11403-1 -2
  953.305 MPa
@Pressure 2.00 MPa,
Temperature 100 °C		 138265 psi
@Pressure 290 psi,
Temperature 212 °F		 50%RH; ISO 11403-1 -2
  1183.43 MPa
@Pressure 20.0 MPa,
Temperature 60.0 °C		 171642 psi
@Pressure 2900 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  1240.69 MPa
@Pressure 10.0 MPa,
Temperature 80.0 °C		 179947 psi
@Pressure 1450 psi,
Temperature 176 °F		 50%RH; ISO 11403-1 -2
  1256.32 MPa
@Pressure 15.0 MPa,
Temperature 60.0 °C		 182214 psi
@Pressure 2180 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  1294.5 MPa
@Pressure 8.00 MPa,
Temperature 80.0 °C		 187750 psi
@Pressure 1160 psi,
Temperature 176 °F		 50%RH; ISO 11403-1 -2
  1310.62 MPa
@Pressure 10.0 MPa,
Temperature 60.0 °C		 190090 psi
@Pressure 1450 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  1333.44 MPa
@Pressure 6.00 MPa,
Temperature 80.0 °C		 193399 psi
@Pressure 870 psi,
Temperature 176 °F		 50%RH; ISO 11403-1 -2
  1343.67 MPa
@Pressure 5.00 MPa,
Temperature 60.0 °C		 194883 psi
@Pressure 725 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  1350.99 MPa
@Pressure 4.00 MPa,
Temperature 80.0 °C		 195945 psi
@Pressure 580 psi,
Temperature 176 °F		 50%RH; ISO 11403-1 -2
  1369.13 MPa
@Pressure 2.00 MPa,
Temperature 80.0 °C		 198576 psi
@Pressure 290 psi,
Temperature 176 °F		 50%RH; ISO 11403-1 -2
  1811.59 MPa
@Pressure 15.0 MPa,
Temperature 23.0 °C		 262749 psi
@Pressure 2180 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1857.31 MPa
@Pressure 14.0 MPa,
Temperature 23.0 °C		 269381 psi
@Pressure 2030 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1960.78 MPa
@Pressure 12.0 MPa,
Temperature 23.0 °C		 284388 psi
@Pressure 1740 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2052.33 MPa
@Pressure 10.0 MPa,
Temperature 23.0 °C		 297666 psi
@Pressure 1450 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2116.08 MPa
@Pressure 8.00 MPa,
Temperature 23.0 °C		 306912 psi
@Pressure 1160 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2150.54 MPa
@Pressure 6.00 MPa,
Temperature 23.0 °C		 311910 psi
@Pressure 870 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2168.74 MPa
@Pressure 4.00 MPa,
Temperature 23.0 °C		 314550 psi
@Pressure 580 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2177.44 MPa
@Pressure 2.00 MPa,
Temperature 23.0 °C		 315812 psi
@Pressure 290 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2170 MPa
@Time 3600 sec		 315000 psi
@Time 1.00 hour		 50%RH; ISO 899-1
Tensile Creep Modulus, 1000 hours    609.137 MPa
@Pressure 12.0 MPa,
Temperature 100 °C		 88348.0 psi
@Pressure 1740 psi,
Temperature 212 °F		 50%RH; ISO 11403-1 -2
  634.8 MPa
@Pressure 10.0 MPa,
Temperature 100 °C		 92070 psi
@Pressure 1450 psi,
Temperature 212 °F		 50%RH; ISO 11403-1 -2
  659.233 MPa
@Pressure 8.00 MPa,
Temperature 100 °C		 95613.8 psi
@Pressure 1160 psi,
Temperature 212 °F		 50%RH; ISO 11403-1 -2
  674.157 MPa
@Pressure 6.00 MPa,
Temperature 100 °C		 97778.4 psi
@Pressure 870 psi,
Temperature 212 °F		 50%RH; ISO 11403-1 -2
  687.585 MPa
@Pressure 4.00 MPa,
Temperature 100 °C		 99726.0 psi
@Pressure 580 psi,
Temperature 212 °F		 50%RH; ISO 11403-1 -2
  696.875 MPa
@Pressure 2.00 MPa,
Temperature 100 °C		 101073 psi
@Pressure 290 psi,
Temperature 212 °F		 50%RH; ISO 11403-1 -2
  778.21 MPa
@Pressure 20.0 MPa,
Temperature 60.0 °C		 112870 psi
@Pressure 2900 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  780.379 MPa
@Pressure 15.0 MPa,
Temperature 60.0 °C		 113185 psi
@Pressure 2180 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  781.25 MPa
@Pressure 10.0 MPa,
Temperature 60.0 °C		 113310 psi
@Pressure 1450 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  781.599 MPa
@Pressure 5.00 MPa,
Temperature 60.0 °C		 113362 psi
@Pressure 725 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  877.193 MPa
@Pressure 10.0 MPa,
Temperature 80.0 °C		 127226 psi
@Pressure 1450 psi,
Temperature 176 °F		 50%RH; ISO 11403-1 -2
  914.286 MPa
@Pressure 8.00 MPa,
Temperature 80.0 °C		 132606 psi
@Pressure 1160 psi,
Temperature 176 °F		 50%RH; ISO 11403-1 -2
  942.785 MPa
@Pressure 6.00 MPa,
Temperature 80.0 °C		 136740 psi
@Pressure 870 psi,
Temperature 176 °F		 50%RH; ISO 11403-1 -2
  960.715 MPa
@Pressure 4.00 MPa,
Temperature 80.0 °C		 139340 psi
@Pressure 580 psi,
Temperature 176 °F		 50%RH; ISO 11403-1 -2
  972.516 MPa
@Pressure 2.00 MPa,
Temperature 80.0 °C		 141052 psi
@Pressure 290 psi,
Temperature 176 °F		 50%RH; ISO 11403-1 -2
  1153.85 MPa
@Pressure 15.0 MPa,
Temperature 23.0 °C		 167352 psi
@Pressure 2180 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1171.07 MPa
@Pressure 14.0 MPa,
Temperature 23.0 °C		 169850 psi
@Pressure 2030 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1222 MPa
@Pressure 12.0 MPa,
Temperature 23.0 °C		 177200 psi
@Pressure 1740 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1307.26 MPa
@Pressure 10.0 MPa,
Temperature 23.0 °C		 189602 psi
@Pressure 1450 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1373.75 MPa
@Pressure 8.00 MPa,
Temperature 23.0 °C		 199246 psi
@Pressure 1160 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1379.31 MPa
@Pressure 6.00 MPa,
Temperature 23.0 °C		 200052 psi
@Pressure 870 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1393.75 MPa
@Pressure 4.00 MPa,
Temperature 23.0 °C		 202147 psi
@Pressure 580 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1420.56 MPa
@Pressure 2.00 MPa,
Temperature 23.0 °C		 206035 psi
@Pressure 290 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1400 MPa
@Time 3.60e+6 sec		 203000 psi
@Time 1000 hour		 50%RH; ISO 899-1
 
Electrical Properties Metric English Comments
Volume Resistivity  1.00e+11 ohm-cm 1.00e+11 ohm-cm 50%RH; IEC 60093
Surface Resistance  1.00e+14 ohm 1.00e+14 ohm 50%RH; IEC 60093
Dielectric Constant    3.6
@Frequency 1.00e+6 Hz		 3.6
@Frequency 1.00e+6 Hz		 DAM; IEC 60250
  4.3
@Frequency 100 Hz		 4.3
@Frequency 100 Hz		 DAM; IEC 60250
  4.5
@Frequency 1.00e+6 Hz		 4.5
@Frequency 1.00e+6 Hz		 50%RH; IEC 60250
  12.6
@Frequency 100 Hz		 12.6
@Frequency 100 Hz		 50%RH; IEC 60250
Dielectric Strength  27.0 kV/mm 686 kV/in 50%RH; IEC 60243-1
  36.0 kV/mm 914 kV/in DAM; IEC 60243-1
Dissipation Factor    0.012
@Frequency 100 Hz		 0.012
@Frequency 100 Hz		 DAM; IEC 60250
  0.024
@Frequency 1.00e+6 Hz		 0.024
@Frequency 1.00e+6 Hz		 DAM; IEC 60250
  0.075
@Frequency 1.00e+6 Hz		 0.075
@Frequency 1.00e+6 Hz		 50%RH; IEC 60250
  0.44
@Frequency 100 Hz		 0.44
@Frequency 100 Hz		 50%RH; IEC 60250
Comparative Tracking Index  550 V 550 V DAM; IEC 60112
 
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow  85.0 µm/m-°C 47.2 µin/in-°F DAM; ISO 11359-1/-2
CTE, linear, Transverse to Flow  85.0 µm/m-°C 47.2 µin/in-°F DAM; ISO 11359-1/-2
Specific Heat Capacity  1.90 J/g-°C 0.454 BTU/lb-°F  
Thermal Conductivity  0.270 W/m-K 1.87 BTU-in/hr-ft²-°F of melt
Melting Point  256 °C 493 °F DAM; 10°C/min; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi)  220 °C 428 °F DAM; ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)  110 °C 230 °F DAM; ISO 75-1/-2
Vicat Softening Point  235 °C 455 °F DAM; 50°C/h 50N; ISO 306
Flammability, UL94    HB
@Thickness 1.50 mm		 HB
@Thickness 0.0591 in		 DAM; IEC 60695-11-10
  HB
@Thickness 0.800 mm		 HB
@Thickness 0.0315 in		 DAM; IEC 60695-11-10
 
Descriptive Properties
Additives Release agent  
Delivery form Pellets  
Emission of organic compounds 4.6 µgC/g VDA 277
Odour class 3.5 VDA 270
Part Marking Code >PA66-IMD40< ISO 11469
Processing Injection Moulding  
Regional Availability Europe  
  Near East/Africa  
Resin Identification PA66-IMD40  
Special characteristics Heat stabilised or stable to heat  
UL recognition UL DAM
 
特性
 
1、具有优良的耐磨性、自润滑性，机械强度较高。但吸水性较大，因而尺寸稳定性较差
 
2、PA66在较高温度也能保持较强的强度和刚度。PA66在成型后仍然具有吸湿性，其程度主要取决于材料的组成、壁厚以及环境条件。
 
3、在产品设计时，一定要考虑吸湿性对几何稳定性的影响。为了提高PA66的机械特性，经常加入各种各样的改性剂。玻璃就是最常见的添加剂，有时为了提高抗冲击性还加入合成橡胶，如EPDM和SBR等。PA66的粘性较低，因此流动性很好（但不如PA6）。这个性质可以用来加工很薄的元件。它的粘度对温度变化很敏感。
颗粒08
 
上海松翰塑化科技有限公司，供应原料，品质真实,物实价廉。
PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。
欢迎各位客户前来咨询：
联系人： 夏先生  
手  机：13501802636   
QQ    ：205730283  
邮 箱 ：205730283@qq.com 
 

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/news/

本文链接: http://www.su-jiao.com/news/show-25412.html

免责声明: 本文 PA66 11C140 NC010 具高抗张强度 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他资讯信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4