塑胶原料之家
  1. 首页
  2. 资讯
  3. 产品资讯
  4. PA66 EFE6053 BK413 Nylon66 自润滑

PA66 EFE6053 BK413 Nylon66 自润滑

PA66 EFE6053 BK413 Nylon66在产品设计时，一定要考虑吸湿性对几何稳定性的影响。PA66 EFE6053 BK413 Nylon66为了提高PA66的机械特性，经常加入各种各样的改性剂。PA66 EFE6053 BK413 Nylon66玻璃就是最常见的添加剂，有时为了提高抗冲击性还加入合成橡胶，如EPDM和SBR等。PA66的粘性较低，因此流动性很好（但不如PA6）。这个性质可以用来加工很薄的元件。它的粘度对温度变化很敏感。
 PA66 EFE6053 BK413 Nylon66透明或不透明乳白色结晶形聚合物，具有可塑性。密度1．15g/cm3。熔点252℃。脆化温度-30℃。热分解温度大于350℃。 连续耐热80-120℃,平衡吸水率2．5%。能耐酸、碱、大多数无机盐水溶液、卤代烷、烃类、酯类、酮类等腐蚀。
 物性表：
Physical Properties Metric English Comments
Density  1.25 g/cc 0.0452 lb/in³  
  1.47 g/cc 0.0531 lb/in³ DAM; ISO 1183
Water Absorption  5.0 %
@Thickness 2.00 mm		 5.0 %
@Thickness 0.0787 in		 DAM; Sim. to ISO 62
Moisture Absorption  1.50 %
@Thickness 2.00 mm		 1.50 %
@Thickness 0.0787 in		 DAM; Sim. to ISO 62
Viscosity    40000 cP
@Shear Rate 5000 1/s,
Temperature 315 °C		 40000 cP
@Shear Rate 5000 1/s,
Temperature 599 °F		 ISO 11403-1 -2
  71000 cP
@Shear Rate 5000 1/s,
Temperature 295 °C		 71000 cP
@Shear Rate 5000 1/s,
Temperature 563 °F		 ISO 11403-1 -2
  94000 cP
@Shear Rate 500 1/s,
Temperature 315 °C		 94000 cP
@Shear Rate 500 1/s,
Temperature 599 °F		 ISO 11403-1 -2
  127000 cP
@Shear Rate 5000 1/s,
Temperature 275 °C		 127000 cP
@Shear Rate 5000 1/s,
Temperature 527 °F		 ISO 11403-1 -2
  189000 cP
@Shear Rate 500 1/s,
Temperature 295 °C		 189000 cP
@Shear Rate 500 1/s,
Temperature 563 °F		 ISO 11403-1 -2
  383000 cP
@Shear Rate 500 1/s,
Temperature 275 °C		 383000 cP
@Shear Rate 500 1/s,
Temperature 527 °F		 ISO 11403-1 -2
Viscosity Test  140 cm³/g 140 cm³/g DAM; ISO 307 1157 1628
Linear Mold Shrinkage, Flow  0.0040 cm/cm 0.0040 in/in DAM; ISO 294-4 2577
Linear Mold Shrinkage, Transverse  0.011 cm/cm 0.011 in/in DAM; ISO 294-4 2577
 
Mechanical Properties Metric English Comments
Tensile Strength at Break  97.0 MPa 14100 psi 50%RH; ISO 527-1/-2
  160 MPa 23200 psi DAM; ISO 527-1/-2
Tensile Stress    23.4 MPa
@Strain 0.570 %,
Temperature 90.0 °C		 3390 psi
@Strain 0.570 %,
Temperature 194 °F		 50%RH; ISO 11403-1 -2
  23.7 MPa
@Strain 0.440 %,
Temperature 40.0 °C		 3440 psi
@Strain 0.440 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  25.0 MPa
@Strain 0.500 %,
Temperature 90.0 °C		 3630 psi
@Strain 0.500 %,
Temperature 194 °F		 DAM; ISO 11403-1 -2
  25.0 MPa
@Strain 0.240 %,
Temperature 0.000 °C		 3630 psi
@Strain 0.240 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  25.2 MPa
@Strain 0.700 %,
Temperature 150 °C		 3650 psi
@Strain 0.700 %,
Temperature 302 °F		 DAM; ISO 11403-1 -2
  25.4 MPa
@Strain 0.350 %,
Temperature 23.0 °C		 3680 psi
@Strain 0.350 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  27.3 MPa
@Strain 0.220 %,
Temperature -20.0 °C		 3960 psi
@Strain 0.220 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  36.6 MPa
@Strain 0.800 %,
Temperature 90.0 °C		 5310 psi
@Strain 0.800 %,
Temperature 194 °F		 DAM; ISO 11403-1 -2
  45.9 MPa
@Strain 1.10 %,
Temperature 90.0 °C		 6660 psi
@Strain 1.10 %,
Temperature 194 °F		 DAM; ISO 11403-1 -2
  53.0 MPa
@Strain 2.28 %,
Temperature 90.0 °C		 7690 psi
@Strain 2.28 %,
Temperature 194 °F		 50%RH; ISO 11403-1 -2
  53.8 MPa
@Strain 1.40 %,
Temperature 90.0 °C		 7800 psi
@Strain 1.40 %,
Temperature 194 °F		 DAM; ISO 11403-1 -2
  59.4 MPa
@Strain 3.99 %,
Temperature 90.0 °C		 8620 psi
@Strain 3.99 %,
Temperature 194 °F		 50%RH; ISO 11403-1 -2
  59.5 MPa
@Strain 2.80 %,
Temperature 150 °C		 8630 psi
@Strain 2.80 %,
Temperature 302 °F		 DAM; ISO 11403-1 -2
  64.9 MPa
@Strain 1.76 %,
Temperature 40.0 °C		 9410 psi
@Strain 1.76 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  65.5 MPa
@Strain 4.70 %,
Temperature 150 °C		 9500 psi
@Strain 4.70 %,
Temperature 302 °F		 DAM; ISO 11403-1 -2
  68.8 MPa
@Strain 1.40 %,
Temperature 23.0 °C		 9980 psi
@Strain 1.40 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  75.6 MPa
@Strain 3.40 %,
Temperature 90.0 °C		 11000 psi
@Strain 3.40 %,
Temperature 194 °F		 DAM; ISO 11403-1 -2
  78.4 MPa
@Strain 3.08 %,
Temperature 40.0 °C		 11400 psi
@Strain 3.08 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  78.5 MPa
@Strain 0.960 %,
Temperature 0.000 °C		 11400 psi
@Strain 0.960 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  84.6 MPa
@Strain 0.880 %,
Temperature 40.0 °C		 12300 psi
@Strain 0.880 %,
Temperature 104 °F		 DAM; ISO 11403-1 -2
  85.4 MPa
@Strain 2.45 %,
Temperature 23.0 °C		 12400 psi
@Strain 2.45 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  87.5 MPa
@Strain 0.880 %,
Temperature -20.0 °C		 12700 psi
@Strain 0.880 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  108 MPa
@Strain 1.10 %,
Temperature 23.0 °C		 15700 psi
@Strain 1.10 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  109 MPa
@Strain 1.68 %,
Temperature 0.000 °C		 15800 psi
@Strain 1.68 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  115 MPa
@Strain 1.15 %,
Temperature 0.000 °C		 16700 psi
@Strain 1.15 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  116 MPa
@Strain 1.54 %,
Temperature 40.0 °C		 16800 psi
@Strain 1.54 %,
Temperature 104 °F		 DAM; ISO 11403-1 -2
  120 MPa
@Strain 1.19 %,
Temperature -20.0 °C		 17400 psi
@Strain 1.19 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
  123.9 MPa
@Strain 1.20 %,
Temperature -40.0 °C		 17970 psi
@Strain 1.20 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  126 MPa
@Strain 2.40 %,
Temperature 0.000 °C		 18300 psi
@Strain 2.40 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  130 MPa
@Strain 2.20 %,
Temperature 40.0 °C		 18900 psi
@Strain 2.20 %,
Temperature 104 °F		 DAM; ISO 11403-1 -2
  138 MPa
@Strain 1.76 %,
Temperature 23.0 °C		 20000 psi
@Strain 1.76 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  140 MPa
@Strain 1.76 %,
Temperature -20.0 °C		 20300 psi
@Strain 1.76 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  149 MPa
@Strain 1.84 %,
Temperature 0.000 °C		 21600 psi
@Strain 1.84 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  149.8 MPa
@Strain 1.50 %,
Temperature -40.0 °C		 21730 psi
@Strain 1.50 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  150 MPa
@Strain 1.76 %,
Temperature -20.0 °C		 21800 psi
@Strain 1.76 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
  172.4 MPa
@Strain 1.80 %,
Temperature -40.0 °C		 25000 psi
@Strain 1.80 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  191.7 MPa
@Strain 2.10 %,
Temperature -40.0 °C		 27800 psi
@Strain 2.10 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
   10.0 MPa
@Strain 0.170 %,
Time 3600 sec		 1450 psi
@Strain 0.170 %,
Time 1.00 hour		 50%RH; isochronous; ISO 11403-1 -2
  10.0 MPa
@Strain 0.180 %,
Time 36000 sec		 1450 psi
@Strain 0.180 %,
Time 10.0 hour		 50%RH; isochronous; ISO 11403-1 -2
  10.0 MPa
@Strain 0.210 %,
Time 360000 sec		 1450 psi
@Strain 0.210 %,
Time 100 hour		 50%RH; isochronous; ISO 11403-1 -2
  10.0 MPa
@Strain 0.270 %,
Time 3.60e+6 sec		 1450 psi
@Strain 0.270 %,
Time 1000 hour		 50%RH; isochronous; ISO 11403-1 -2
Elongation at Break  2.2 % 2.2 % DAM; ISO 527-1/-2
  4.6 % 4.6 % 50%RH; ISO 527-1/-2
Tensile Modulus  6.50 GPa 943 ksi 50%RH; ISO 527-1/-2
  10.0 GPa 1450 ksi DAM; ISO 527-1/-2
   2.58677 GPa
@Temperature 130 °C		 375.180 ksi
@Temperature 266 °F		 DAM; Dynamic; ISO 11403-1 -2
  4.88069 GPa
@Temperature 70.0 °C		 707.885 ksi
@Temperature 158 °F		 DAM; Dynamic; ISO 11403-1 -2
  7.84165 GPa
@Temperature -10.0 °C		 1137.34 ksi
@Temperature 14.0 °F		 DAM; Dynamic; ISO 11403-1 -2
  8.55067 GPa
@Temperature -60.0 °C		 1240.17 ksi
@Temperature -76.0 °F		 DAM; Dynamic; ISO 11403-1 -2
  9.94035 GPa
@Temperature -110 °C		 1441.73 ksi
@Temperature -166 °F		 DAM; Dynamic; ISO 11403-1 -2
  11.2256 GPa
@Temperature -140 °C		 1628.14 ksi
@Temperature -220 °F		 DAM; Dynamic; ISO 11403-1 -2
Flexural Modulus  9.90 GPa 1440 ksi DAM; ISO 178
Shear Modulus    0.642 GPa
@Temperature 150 °C		 93.1 ksi
@Temperature 302 °F		 DAM; Dynamic; ISO 11403-1 -2
  0.754 GPa
@Temperature 110 °C		 109 ksi
@Temperature 230 °F		 DAM; Dynamic; ISO 11403-1 -2
  1.296 GPa
@Temperature 70.0 °C		 188.0 ksi
@Temperature 158 °F		 DAM; Dynamic; ISO 11403-1 -2
  2.421 GPa
@Temperature 20.0 °C		 351.1 ksi
@Temperature 68.0 °F		 DAM; Dynamic; ISO 11403-1 -2
  2.485 GPa
@Temperature -20.0 °C		 360.4 ksi
@Temperature -4.00 °F		 DAM; Dynamic; ISO 11403-1 -2
  2.569 GPa
@Temperature -50.0 °C		 372.6 ksi
@Temperature -58.0 °F		 DAM; Dynamic; ISO 11403-1 -2
Shear Strength    0.0470 MPa
@Shear Rate 500 1/s,
Temperature 315 °C		 6.82 psi
@Shear Rate 500 1/s,
Temperature 599 °F		 ISO 11403-1 -2
  0.0945 MPa
@Shear Rate 500 1/s,
Temperature 295 °C		 13.7 psi
@Shear Rate 500 1/s,
Temperature 563 °F		 ISO 11403-1 -2
  0.1915 MPa
@Shear Rate 500 1/s,
Temperature 275 °C		 27.77 psi
@Shear Rate 500 1/s,
Temperature 527 °F		 ISO 11403-1 -2
Secant Modulus    1.27951 GPa
@Strain 5.76 %,
Temperature 100 °C		 185.580 ksi
@Strain 5.76 %,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  2.2642 GPa
@Strain 3.52 %,
Temperature 40.0 °C		 328.40 ksi
@Strain 3.52 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  2.53906 GPa
@Strain 2.56 %,
Temperature 100 °C		 368.265 ksi
@Strain 2.56 %,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  3.14286 GPa
@Strain 2.80 %,
Temperature 23.0 °C		 455.840 ksi
@Strain 2.80 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  3.6875 GPa
@Strain 1.76 %,
Temperature 40.0 °C		 534.83 ksi
@Strain 1.76 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  4.20312 GPa
@Strain 0.640 %,
Temperature 100 °C		 609.621 ksi
@Strain 0.640 %,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  4.91429 GPa
@Strain 1.40 %,
Temperature 23.0 °C		 712.769 ksi
@Strain 1.40 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  5.38636 GPa
@Strain 0.440 %,
Temperature 40.0 °C		 781.238 ksi
@Strain 0.440 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  6.04167 GPa
@Strain 1.92 %,
Temperature 0.000 °C		 876.284 ksi
@Strain 1.92 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  7.25714 GPa
@Strain 0.350 %,
Temperature 23.0 °C		 1052.58 ksi
@Strain 0.350 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  7.53247 GPa
@Strain 1.54 %,
Temperature 40.0 °C		 1092.51 ksi
@Strain 1.54 %,
Temperature 104 °F		 DAM; ISO 11403-1 -2
  7.62626 GPa
@Strain 1.98 %,
Temperature -20.0 °C		 1106.11 ksi
@Strain 1.98 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  7.84091 GPa
@Strain 1.76 %,
Temperature 23.0 °C		 1137.25 ksi
@Strain 1.76 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  8.09783 GPa
@Strain 1.84 %,
Temperature 0.000 °C		 1174.51 ksi
@Strain 1.84 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  8.17708 GPa
@Strain 0.960 %,
Temperature 0.000 °C		 1186.00 ksi
@Strain 0.960 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  8.52273 GPa
@Strain 1.76 %,
Temperature -20.0 °C		 1236.14 ksi
@Strain 1.76 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
  8.8087 GPa
@Strain 2.30 %,
Temperature -40.0 °C		 1277.6 ksi
@Strain 2.30 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  9.43158 GPa
@Strain 1.90 %,
Temperature -40.0 °C		 1367.96 ksi
@Strain 1.90 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  9.61364 GPa
@Strain 0.880 %,
Temperature 40.0 °C		 1394.36 ksi
@Strain 0.880 %,
Temperature 104 °F		 DAM; ISO 11403-1 -2
  9.81818 GPa
@Strain 1.10 %,
Temperature 23.0 °C		 1424.03 ksi
@Strain 1.10 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  9.94318 GPa
@Strain 0.880 %,
Temperature -20.0 °C		 1442.16 ksi
@Strain 0.880 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  9.98667 GPa
@Strain 1.50 %,
Temperature -40.0 °C		 1448.47 ksi
@Strain 1.50 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  10.0 GPa
@Strain 1.15 %,
Temperature 0.000 °C		 1450 ksi
@Strain 1.15 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  10.084 GPa
@Strain 1.19 %,
Temperature -20.0 °C		 1462.6 ksi
@Strain 1.19 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
  10.325 GPa
@Strain 1.20 %,
Temperature -40.0 °C		 1497.5 ksi
@Strain 1.20 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  10.4167 GPa
@Strain 0.240 %,
Temperature 0.000 °C		 1510.84 ksi
@Strain 0.240 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  12.4091 GPa
@Strain 0.220 %,
Temperature -20.0 °C		 1799.82 ksi
@Strain 0.220 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
Charpy Impact Unnotched  4.50 J/cm² 21.4 ft-lb/in² DAM; ISO 179/1eU
  5.00 J/cm² 23.8 ft-lb/in² 50%RH; ISO 179/1eU
   4.00 J/cm²
@Temperature -30.0 °C		 19.0 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 179/1eU
  4.00 J/cm²
@Temperature -30.0 °C		 19.0 ft-lb/in²
@Temperature -22.0 °F		 50%RH; ISO 179/1eU
Charpy Impact, Notched  0.450 J/cm² 2.14 ft-lb/in² DAM; ISO 179/1eA
  0.650 J/cm² 3.09 ft-lb/in² 50%RH; ISO 179/1eA
   0.400 J/cm²
@Temperature -30.0 °C		 1.90 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 179/1eA
  0.600 J/cm²
@Temperature -30.0 °C		 2.86 ft-lb/in²
@Temperature -22.0 °F		 50%RH; ISO 179/1eA
Tensile Creep Modulus, 1 hour    2222.37 MPa
@Pressure 20.0 MPa,
Temperature 140 °C		 322328 psi
@Pressure 2900 psi,
Temperature 284 °F		 DAM; ISO 11403-1 -2
  2273.19 MPa
@Pressure 15.0 MPa,
Temperature 140 °C		 329699 psi
@Pressure 2180 psi,
Temperature 284 °F		 DAM; ISO 11403-1 -2
  2336.34 MPa
@Pressure 10.0 MPa,
Temperature 140 °C		 338858 psi
@Pressure 1450 psi,
Temperature 284 °F		 DAM; ISO 11403-1 -2
  2382.16 MPa
@Pressure 5.00 MPa,
Temperature 140 °C		 345504 psi
@Pressure 725 psi,
Temperature 284 °F		 DAM; ISO 11403-1 -2
  2688.17 MPa
@Pressure 25.0 MPa,
Temperature 120 °C		 389887 psi
@Pressure 3630 psi,
Temperature 248 °F		 DAM; ISO 11403-1 -2
  2822.58 MPa
@Pressure 35.0 MPa,
Temperature 60.0 °C		 409381 psi
@Pressure 5080 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  2830.24 MPa
@Pressure 30.0 MPa,
Temperature 60.0 °C		 410492 psi
@Pressure 4350 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  2832.63 MPa
@Pressure 20.0 MPa,
Temperature 120 °C		 410839 psi
@Pressure 2900 psi,
Temperature 248 °F		 DAM; ISO 11403-1 -2
  2844.24 MPa
@Pressure 25.0 MPa,
Temperature 60.0 °C		 412523 psi
@Pressure 3630 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  2873.67 MPa
@Pressure 20.0 MPa,
Temperature 60.0 °C		 416791 psi
@Pressure 2900 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  2941.18 MPa
@Pressure 15.0 MPa,
Temperature 60.0 °C		 426583 psi
@Pressure 2180 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  3060.78 MPa
@Pressure 15.0 MPa,
Temperature 120 °C		 443929 psi
@Pressure 2180 psi,
Temperature 248 °F		 DAM; ISO 11403-1 -2
  3094.43 MPa
@Pressure 10.0 MPa,
Temperature 60.0 °C		 448810 psi
@Pressure 1450 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  3333.33 MPa
@Pressure 5.00 MPa,
Temperature 60.0 °C		 483460 psi
@Pressure 725 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  3448.28 MPa
@Pressure 10.0 MPa,
Temperature 120 °C		 500132 psi
@Pressure 1450 psi,
Temperature 248 °F		 DAM; ISO 11403-1 -2
  4166.67 MPa
@Pressure 5.00 MPa,
Temperature 120 °C		 604325 psi
@Pressure 725 psi,
Temperature 248 °F		 DAM; ISO 11403-1 -2
  4273.5 MPa
@Pressure 50.0 MPa,
Temperature 23.0 °C		 619820 psi
@Pressure 7250 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  4442.74 MPa
@Pressure 40.0 MPa,
Temperature 23.0 °C		 644366 psi
@Pressure 5800 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  4708.45 MPa
@Pressure 30.0 MPa,
Temperature 23.0 °C		 682904 psi
@Pressure 4350 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  5162.55 MPa
@Pressure 20.0 MPa,
Temperature 23.0 °C		 748766 psi
@Pressure 2900 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  5882.35 MPa
@Pressure 10.0 MPa,
Temperature 23.0 °C		 853164 psi
@Pressure 1450 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  6000 MPa
@Time 3600 sec		 870000 psi
@Time 1.00 hour		 50%RH; ISO 899-1
Tensile Creep Modulus, 1000 hours    1644.74 MPa
@Pressure 20.0 MPa,
Temperature 140 °C		 238550 psi
@Pressure 2900 psi,
Temperature 284 °F		 DAM; ISO 11403-1 -2
  1741.92 MPa
@Pressure 15.0 MPa,
Temperature 140 °C		 252645 psi
@Pressure 2180 psi,
Temperature 284 °F		 DAM; ISO 11403-1 -2
  1872.69 MPa
@Pressure 10.0 MPa,
Temperature 140 °C		 271611 psi
@Pressure 1450 psi,
Temperature 284 °F		 DAM; ISO 11403-1 -2
  1975.35 MPa
@Pressure 5.00 MPa,
Temperature 140 °C		 286501 psi
@Pressure 725 psi,
Temperature 284 °F		 DAM; ISO 11403-1 -2
  2000 MPa
@Pressure 35.0 MPa,
Temperature 60.0 °C		 290000 psi
@Pressure 5080 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  2034.58 MPa
@Pressure 30.0 MPa,
Temperature 60.0 °C		 295091 psi
@Pressure 4350 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  2079.51 MPa
@Pressure 25.0 MPa,
Temperature 60.0 °C		 301608 psi
@Pressure 3630 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  2136.06 MPa
@Pressure 20.0 MPa,
Temperature 60.0 °C		 309810 psi
@Pressure 2900 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  2205.88 MPa
@Pressure 15.0 MPa,
Temperature 60.0 °C		 319936 psi
@Pressure 2180 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  2290.33 MPa
@Pressure 10.0 MPa,
Temperature 60.0 °C		 332185 psi
@Pressure 1450 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  2293.58 MPa
@Pressure 25.0 MPa,
Temperature 120 °C		 332656 psi
@Pressure 3630 psi,
Temperature 248 °F		 DAM; ISO 11403-1 -2
  2380.95 MPa
@Pressure 5.00 MPa,
Temperature 60.0 °C		 345328 psi
@Pressure 725 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  2441.48 MPa
@Pressure 20.0 MPa,
Temperature 120 °C		 354107 psi
@Pressure 2900 psi,
Temperature 248 °F		 DAM; ISO 11403-1 -2
  2671.56 MPa
@Pressure 15.0 MPa,
Temperature 120 °C		 387478 psi
@Pressure 2180 psi,
Temperature 248 °F		 DAM; ISO 11403-1 -2
  3030.3 MPa
@Pressure 10.0 MPa,
Temperature 120 °C		 439510 psi
@Pressure 1450 psi,
Temperature 248 °F		 DAM; ISO 11403-1 -2
  3289.47 MPa
@Pressure 50.0 MPa,
Temperature 23.0 °C		 477098 psi
@Pressure 7250 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  3406.08 MPa
@Pressure 40.0 MPa,
Temperature 23.0 °C		 494011 psi
@Pressure 5800 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  3553.16 MPa
@Pressure 30.0 MPa,
Temperature 23.0 °C		 515343 psi
@Pressure 4350 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  3571.43 MPa
@Pressure 5.00 MPa,
Temperature 120 °C		 517993 psi
@Pressure 725 psi,
Temperature 248 °F		 DAM; ISO 11403-1 -2
  3672.71 MPa
@Pressure 20.0 MPa,
Temperature 23.0 °C		 532683 psi
@Pressure 2900 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  3703.7 MPa
@Pressure 10.0 MPa,
Temperature 23.0 °C		 537180 psi
@Pressure 1450 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  3700 MPa
@Time 3.60e+6 sec		 537000 psi
@Time 1000 hour		 50%RH; ISO 899-1
 
Electrical Properties Metric English Comments
Dielectric Constant    4.8
@Frequency 1.00e+6 Hz		 4.8
@Frequency 1.00e+6 Hz		 DAM; IEC 60250
  4.9
@Frequency 100 Hz		 4.9
@Frequency 100 Hz		 DAM; IEC 60250
  5.0
@Frequency 1.00e+6 Hz		 5.0
@Frequency 1.00e+6 Hz		 50%RH; IEC 60250
  13.9
@Frequency 100 Hz		 13.9
@Frequency 100 Hz		 50%RH; IEC 60250
Dielectric Strength  28.0 kV/mm 711 kV/in DAM; IEC 60243-1
Dissipation Factor    0.013
@Frequency 1.00e+6 Hz		 0.013
@Frequency 1.00e+6 Hz		 DAM; IEC 60250
  0.014
@Frequency 100 Hz		 0.014
@Frequency 100 Hz		 DAM; IEC 60250
  0.070
@Frequency 1.00e+6 Hz		 0.070
@Frequency 1.00e+6 Hz		 50%RH; IEC 60250
  0.54
@Frequency 100 Hz		 0.54
@Frequency 100 Hz		 50%RH; IEC 60250
 
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow  28.0 µm/m-°C 15.6 µin/in-°F DAM; ISO 11359-1/-2
CTE, linear, Transverse to Flow  87.0 µm/m-°C 48.3 µin/in-°F DAM; ISO 11359-1/-2
Specific Heat Capacity  1.90 J/g-°C 0.454 BTU/lb-°F  
Thermal Conductivity  0.270 W/m-K 1.87 BTU-in/hr-ft²-°F of melt
Melting Point  262 °C 504 °F DAM; 10°C/min; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi)  256 °C 493 °F DAM; ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)  240 °C 464 °F DAM; ISO 75-1/-2
Vicat Softening Point  250 °C 482 °F DAM; 50°C/h 50N; ISO 306
Glass Transition Temp, Tg  70.0 °C 158 °F DAM; 10°C/min; ISO 11357-1/-2
 
Descriptive Properties
Additives Release agent  
Delivery form Pellets  
Part Marking Code >PA66-(GF+MD)40< ISO 11469
Processing Injection Moulding  
Regional Availability Asia Pacific  
  Europe  
  Global  
  Near East/Africa  
  North America  
  South and Central America  
Resin Identification PA66-(GF+MD)40  
Special characteristics Heat stabilised or stable to heat  
  Light stabilised or stable to light  
  U.V. stabilised or stable to weather
上海松翰塑化科技有限公司，供应原料，品质真实,物实价廉。
PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。
欢迎各位客户前来咨询：
联系人： 夏先生  
手  机：13501802636   
QQ    ：205730283  
邮 箱 ：205730283@qq.com 
颗粒06颗粒样图：

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/news/

本文链接: http://www.su-jiao.com/news/show-25437.html

免责声明: 本文 PA66 EFE6053 BK413 Nylon66 自润滑 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他资讯信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4