| 物性表： | |||||
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.37 g/cc | 0.0495 lb/in³ | DAM; ISO 1183 | ||
| Viscosity | 43340.8 cP @Shear Rate 5000 1/s, Temperature 305 °C |
43340.8 cP @Shear Rate 5000 1/s, Temperature 581 °F |
ISO 11403-1 -2 | ||
| 54074.8 cP @Shear Rate 5000 1/s, Temperature 295 °C |
54074.8 cP @Shear Rate 5000 1/s, Temperature 563 °F |
ISO 11403-1 -2 | |||
| 68868.6 cP @Shear Rate 5000 1/s, Temperature 285 °C |
68868.6 cP @Shear Rate 5000 1/s, Temperature 545 °F |
ISO 11403-1 -2 | |||
| 127136 cP @Shear Rate 500 1/s, Temperature 305 °C |
127136 cP @Shear Rate 500 1/s, Temperature 581 °F |
ISO 11403-1 -2 | |||
| 162452 cP @Shear Rate 500 1/s, Temperature 295 °C |
162452 cP @Shear Rate 500 1/s, Temperature 563 °F |
ISO 11403-1 -2 | |||
| 210550 cP @Shear Rate 500 1/s, Temperature 285 °C |
210550 cP @Shear Rate 500 1/s, Temperature 545 °F |
ISO 11403-1 -2 | |||
| Linear Mold Shrinkage, Flow | 0.0030 cm/cm | 0.0030 in/in | DAM; ISO 294-4 2577 | ||
| Linear Mold Shrinkage, Transverse | 0.010 cm/cm | 0.010 in/in | DAM; ISO 294-4 2577 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Tensile Strength at Break | 130 MPa | 18900 psi | 50%RH; ISO 527-1/-2 | ||
| 195 MPa | 28300 psi | DAM; ISO 527-1/-2 | |||
| Elongation at Break | 3.0 % | 3.0 % | DAM; ISO 527-1/-2 | ||
| 5.0 % | 5.0 % | 50%RH; ISO 527-1/-2 | |||
| Tensile Modulus | 7.20 GPa | 1040 ksi | 50%RH; ISO 527-1/-2 | ||
| 10.0 GPa | 1450 ksi | DAM; ISO 527-1/-2 | |||
| 3.322 GPa @Temperature 180 °C |
481.8 ksi @Temperature 356 °F |
DAM; Dynamic; ISO 11403-1 -2 | |||
| 4.515 GPa @Temperature 100 °C |
654.8 ksi @Temperature 212 °F |
DAM; Dynamic; ISO 11403-1 -2 | |||
| 8.659 GPa @Temperature 50.0 °C |
1256 ksi @Temperature 122 °F |
DAM; Dynamic; ISO 11403-1 -2 | |||
| 9.283 GPa @Temperature 10.0 °C |
1346 ksi @Temperature 50.0 °F |
DAM; Dynamic; ISO 11403-1 -2 | |||
| 9.365 GPa @Temperature -20.0 °C |
1358 ksi @Temperature -4.00 °F |
DAM; Dynamic; ISO 11403-1 -2 | |||
| Shear Modulus | 1.292 GPa @Temperature 170 °C |
187.4 ksi @Temperature 338 °F |
DAM; Dynamic; ISO 11403-1 -2 | ||
| 1.473 GPa @Temperature 130 °C |
213.6 ksi @Temperature 266 °F |
DAM; Dynamic; ISO 11403-1 -2 | |||
| 2.105 GPa @Temperature 80.0 °C |
305.3 ksi @Temperature 176 °F |
DAM; Dynamic; ISO 11403-1 -2 | |||
| 3.441 GPa @Temperature 30.0 °C |
499.1 ksi @Temperature 86.0 °F |
DAM; Dynamic; ISO 11403-1 -2 | |||
| 3.465 GPa @Temperature 10.0 °C |
502.6 ksi @Temperature 50.0 °F |
DAM; Dynamic; ISO 11403-1 -2 | |||
| 3.494 GPa @Temperature -20.0 °C |
506.8 ksi @Temperature -4.00 °F |
DAM; Dynamic; ISO 11403-1 -2 | |||
| Izod Impact, Notched (ISO) | 12.0 kJ/m² | 5.71 ft-lb/in² | DAM; ISO 180/1A | ||
| 14.0 kJ/m² | 6.66 ft-lb/in² | 50%RH; ISO 180/1A | |||
| Charpy Impact Unnotched | 7.50 J/cm² | 35.7 ft-lb/in² | DAM; ISO 179/1eU | ||
| 9.00 J/cm² | 42.8 ft-lb/in² | 50%RH; ISO 179/1eU | |||
| Charpy Impact, Notched | 1.20 J/cm² | 5.71 ft-lb/in² | DAM; ISO 179/1eA | ||
| 1.40 J/cm² | 6.66 ft-lb/in² | 50%RH; ISO 179/1eA | |||
| Electrical Properties | Metric | English | Comments | ||
| Comparative Tracking Index | 400 V | 400 V | DAM; IEC 60112 | ||
| 400 - 600 V | 400 - 600 V | DAM; UL 746A | |||
| Thermal Properties | Metric | English | Comments | ||
| Melting Point | 262 °C | 504 °F | DAM; 10°C/min; ISO 11357-1/-3 | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 253 °C | 487 °F | DAM; ISO 75-1/-2 | ||
| Flammability, UL94 | HB @Thickness 1.50 mm |
HB @Thickness 0.0591 in |
DAM; IEC 60695-11-10 | ||
| HB @Thickness 0.800 mm |
HB @Thickness 0.0315 in |
DAM; IEC 60695-11-10 | |||
| Flame Spread | 24 mm/min @Thickness 1.00 mm |
0.94 in/min @Thickness 0.0394 in |
SE/B24; ISO 3795 (FMVSS 302) | ||
| De |
|||||
| Odour | class 4 | VDA 270 | |||
| Part Marking Code | >PA66-GF30< | ISO 11469 | |||
| Processing | Injection Moulding | ||||
| Regional Availability | Asia Pacific | ||||
| Europe | |||||
| Global | |||||
| Near East/Africa | |||||
| North America | |||||
| South and Central America | |||||
| Resin Identification | PA66-GF30 | ||||
| Special characteristics | Heat stabilised or stable to heat | ||||
| UL recognition | UL | DAM | |||
| UL | DAM |
||||
在产品设计时，一定要考虑吸湿性对几何稳定性的影响。为了提高PA66的机械特性，经常加入各种各样的改性剂。玻璃就是最常见的添加剂，有时为了提高抗冲击性还加入合成橡胶，如EPDM和SBR等。PA66的粘性较低，因此流动性很好（但不如PA6）。这个性质可以用来加工很薄的元件。它的粘度对温度变化很敏感。
上海松翰塑化科技有限公司，供应原料，品质真实,物实价廉。
PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。
欢迎各位客户前来咨询：
联系人： 夏先生
手 机：13501802636
QQ ：205730283
邮 箱 ：205730283@qq.com