| 物性表： | |||||
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.21 g/cc | 0.0437 lb/in³ | |||
| 1.37 g/cc | 0.0495 lb/in³ | DAM; ISO 1183 | |||
| Water Absorption | 6.9 % @Thickness 2.00 mm |
6.9 % @Thickness 0.0787 in |
DAM; Sim. to ISO 62 | ||
| Moisture Absorption | 2.00 % @Thickness 2.00 mm |
2.00 % @Thickness 0.0787 in |
DAM; Sim. to ISO 62 | ||
| Viscosity Test | 150 cm³/g | 150 cm³/g | DAM; ISO 307 1157 1628 | ||
| Linear Mold Shrinkage, Flow | 0.0030 cm/cm | 0.0030 in/in | DAM; ISO 294-4 2577 | ||
| Linear Mold Shrinkage, Transverse | 0.011 cm/cm | 0.011 in/in | DAM; ISO 294-4 2577 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Tensile Strength at Break | 130 MPa | 18900 psi | 50%RH; ISO 527-1/-2 | ||
| 195 MPa | 28300 psi | DAM; ISO 527-1/-2 | |||
| Elongation at Break | 3.5 % | 3.5 % | DAM; ISO 527-1/-2 | ||
| 5.0 % | 5.0 % | 50%RH; ISO 527-1/-2 | |||
| Tensile Modulus | 7.20 GPa | 1040 ksi | 50%RH; ISO 527-1/-2 | ||
| 9.80 GPa | 1420 ksi | DAM; ISO 527-1/-2 | |||
| Izod Impact, Notched (ISO) | 12.0 kJ/m² | 5.71 ft-lb/in² | DAM; ISO 180/1A | ||
| 14.0 kJ/m² | 6.66 ft-lb/in² | 50%RH; ISO 180/1A | |||
| Charpy Impact Unnotched | 8.00 J/cm² | 38.1 ft-lb/in² | DAM; ISO 179/1eU | ||
| 9.30 J/cm² | 44.3 ft-lb/in² | 50%RH; ISO 179/1eU | |||
| 6.00 J/cm² @Temperature -30.0 °C |
28.6 ft-lb/in² @Temperature -22.0 °F |
DAM; ISO 179/1eU | |||
| Charpy Impact, Notched | 1.30 J/cm² | 6.19 ft-lb/in² | DAM; ISO 179/1eA | ||
| 1.50 J/cm² | 7.14 ft-lb/in² | 50%RH; ISO 179/1eA | |||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 1.00e+13 ohm-cm | 1.00e+13 ohm-cm | DAM; IEC 60093 | ||
| Surface Resistance | 1.00e+12 ohm | 1.00e+12 ohm | 50%RH; IEC 60093 | ||
| Dissipation Factor | 0.016 @Frequency 100 Hz |
0.016 @Frequency 100 Hz |
DAM; IEC 60250 | ||
| 0.016 @Frequency 1.00e+6 Hz |
0.016 @Frequency 1.00e+6 Hz |
DAM; IEC 60250 | |||
| Comparative Tracking Index | 600 V | 600 V | DAM; IEC 60112 | ||
| >= 600 V @Thickness 3.00 mm |
>= 600 V @Thickness 0.118 in |
DAM; UL 746A | |||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear, Parallel to Flow | 28.0 µm/m-°C | 15.6 µin/in-°F | DAM; ISO 11359-1/-2 | ||
| CTE, linear, Transverse to Flow | 95.0 µm/m-°C | 52.8 µin/in-°F | DAM; ISO 11359-1/-2 | ||
| Specific Heat Capacity | 2.29 J/g-°C | 0.547 BTU/lb-°F | |||
| Thermal Conductivity | 0.210 W/m-K | 1.46 BTU-in/hr-ft²-°F | of melt | ||
| Melting Point | 262 °C | 504 °F | DAM; 10°C/min; ISO 11357-1/-3 | ||
| Deflection Temperature at 0.46 MPa (66 psi) | 260 °C | 500 °F | DAM; ISO 75-1/-2 | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 253 °C | 487 °F | DAM; ISO 75-1/-2 | ||
| Glass Transition Temp, Tg | 80.0 °C | 176 °F | DAM; 10°C/min; ISO 11357-1/-2 | ||
| Flammability, UL94 | HB @Thickness 1.50 mm |
HB @Thickness 0.0591 in |
DAM; IEC 60695-11-10 | ||
| HB @Thickness 0.700 mm |
HB @Thickness 0.0276 in |
DAM; IEC 60695-11-10 | |||
| Oxygen Index | 24 % | 24 % | DAM; ISO 4589-1/-2 | ||
| De |
|||||
| Additives | Lubricants | ||||
| Release agent | |||||
| Delivery form | Pellets | ||||
| Eff. thermal diffusivity | 6.85E-08 m²/s | ||||
| Part Marking Code | >PA66-GF30< | ISO 11469 | |||
| Processing | Injection Moulding | ||||
| Regional Availability | Asia Pacific | ||||
| Europe | |||||
| Global | |||||
| Near East/Africa | |||||
| North America | |||||
| South and Central America | |||||
| Resin Identification | PA66-GF30 | ||||
| UL recognition | UL | DAM |
|||
特性
1、具有优良的耐磨性、自润滑性，机械强度较高。但吸水性较大，因而尺寸稳定性较差
2、PA66在较高温度也能保持较强的强度和刚度。PA66在成型后仍然具有吸湿性，其程度主要取决于材料的组成、壁厚以及环境条件。
上海松翰塑化科技有限公司，供应原料，品质真实,物实价廉。
PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。
欢迎各位客户前来咨询：
联系人： 夏先生
手 机：13501802636
QQ ：205730283
邮 箱 ：205730283@qq.com