塑胶原料之家
  1. 首页
  2. 资讯
  3. 产品资讯
  4. PA66 70G35HSLRA4 BK267 耐磨性

PA66 70G35HSLRA4 BK267 耐磨性

PA66 70G35HSLRA4 BK267 透明或不透明乳白色结晶形聚合物，具有可塑性。PA66 70G35HSLRA4 BK267 密度1．15g/cm3。熔点252℃。脆化温度-30℃。PA66 70G35HSLRA4 BK267 热分解温度大于350℃。 连续耐热80-120℃,平衡吸水率2．5%。能耐酸、碱、大多数无机盐水溶液、卤代烷、烃类、酯类、酮类等腐蚀。
 PA66 70G35HSLRA4 BK267 熔化温度：260~290℃。对玻璃添加剂的产品为275~280℃。熔化温度应避免高于300℃。 模具温度：建议80℃。模具温度将影响结晶度，而结晶度将影响产品的物理特性。对于薄壁塑件，如果使用低于40℃的模具温度，则塑件的结晶度将随着时间而变化，为了保持塑件的几何稳定性，需要进行退火处理。
 物性表：
Physical Properties Metric English Comments
Density  1.27 g/cc 0.0459 lb/in³  
  1.41 g/cc 0.0509 lb/in³ DAM; ISO 1183
Water Absorption  5.5 %
@Thickness 2.00 mm		 5.5 %
@Thickness 0.0787 in		 DAM; Sim. to ISO 62
Moisture Absorption  1.70 %
@Thickness 2.00 mm		 1.70 %
@Thickness 0.0787 in		 DAM; Sim. to ISO 62
Viscosity   41313.8 cP
@Shear Rate 5000 1/s,
Temperature 305 °C		 41313.8 cP
@Shear Rate 5000 1/s,
Temperature 581 °F		 ISO 11403-1 -2
  52971.2 cP
@Shear Rate 5000 1/s,
Temperature 295 °C		 52971.2 cP
@Shear Rate 5000 1/s,
Temperature 563 °F		 ISO 11403-1 -2
  69625.4 cP
@Shear Rate 5000 1/s,
Temperature 285 °C		 69625.4 cP
@Shear Rate 5000 1/s,
Temperature 545 °F		 ISO 11403-1 -2
  116946 cP
@Shear Rate 500 1/s,
Temperature 305 °C		 116946 cP
@Shear Rate 500 1/s,
Temperature 581 °F		 ISO 11403-1 -2
  150962 cP
@Shear Rate 500 1/s,
Temperature 295 °C		 150962 cP
@Shear Rate 500 1/s,
Temperature 563 °F		 ISO 11403-1 -2
  199356 cP
@Shear Rate 500 1/s,
Temperature 285 °C		 199356 cP
@Shear Rate 500 1/s,
Temperature 545 °F		 ISO 11403-1 -2
Viscosity Test  96 cm³/g 96 cm³/g DAM; formic acid 90%; ISO 307 1157 1628
Linear Mold Shrinkage, Flow  0.0040 cm/cm 0.0040 in/in DAM; ISO 294-4 2577
Linear Mold Shrinkage, Transverse  0.011 cm/cm 0.011 in/in DAM; ISO 294-4 2577
 
Mechanical Properties Metric English Comments
Tensile Strength at Break  140 MPa 20300 psi 50%RH; ISO 527-1/-2
  210 MPa 30500 psi DAM; ISO 527-1/-2
Tensile Stress    7.57 MPa
@Strain 0.190 %,
Temperature 180 °C		 1100 psi
@Strain 0.190 %,
Temperature 356 °F		 DAM; ISO 11403-1 -2
  9.40 MPa
@Strain 0.240 %,
Temperature 150 °C		 1360 psi
@Strain 0.240 %,
Temperature 302 °F		 50%RH; ISO 11403-1 -2
  11.31 MPa
@Strain 0.240 %,
Temperature 150 °C		 1640 psi
@Strain 0.240 %,
Temperature 302 °F		 DAM; ISO 11403-1 -2
  12.29 MPa
@Strain 0.220 %,
Temperature 90.0 °C		 1783 psi
@Strain 0.220 %,
Temperature 194 °F		 50%RH; ISO 11403-1 -2
  14.78 MPa
@Strain 0.220 %,
Temperature 40.0 °C		 2144 psi
@Strain 0.220 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  14.84 MPa
@Strain 0.230 %,
Temperature 90.0 °C		 2152 psi
@Strain 0.230 %,
Temperature 194 °F		 DAM; ISO 11403-1 -2
  20.64 MPa
@Strain 0.250 %,
Temperature 23.0 °C		 2994 psi
@Strain 0.250 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  21.75 MPa
@Strain 0.200 %,
Temperature 40.0 °C		 3155 psi
@Strain 0.200 %,
Temperature 104 °F		 DAM; ISO 11403-1 -2
  23.57 MPa
@Strain 0.220 %,
Temperature 0.000 °C		 3419 psi
@Strain 0.220 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  27.1 MPa
@Strain 0.220 %,
Temperature 23.0 °C		 3930 psi
@Strain 0.220 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  31.13 MPa
@Strain 1.12 %,
Temperature 180 °C		 4515 psi
@Strain 1.12 %,
Temperature 356 °F		 DAM; ISO 11403-1 -2
  31.31 MPa
@Strain 0.240 %,
Temperature 0.000 °C		 4541 psi
@Strain 0.240 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  31.42 MPa
@Strain 0.250 %,
Temperature -20.0 °C		 4557 psi
@Strain 0.250 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  32.5 MPa
@Strain 0.210 %,
Temperature -20.0 °C		 4710 psi
@Strain 0.210 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
  38.19 MPa
@Strain 1.54 %,
Temperature 150 °C		 5539 psi
@Strain 1.54 %,
Temperature 302 °F		 50%RH; ISO 11403-1 -2
  41.14 MPa
@Strain 1.27 %,
Temperature 150 °C		 5967 psi
@Strain 1.27 %,
Temperature 302 °F		 DAM; ISO 11403-1 -2
  49.0 MPa
@Strain 1.25 %,
Temperature 90.0 °C		 7110 psi
@Strain 1.25 %,
Temperature 194 °F		 50%RH; ISO 11403-1 -2
  50.16 MPa
@Strain 2.58 %,
Temperature 180 °C		 7275 psi
@Strain 2.58 %,
Temperature 356 °F		 DAM; ISO 11403-1 -2
  53.95 MPa
@Strain 3.02 %,
Temperature 150 °C		 7825 psi
@Strain 3.02 %,
Temperature 302 °F		 50%RH; ISO 11403-1 -2
  57.94 MPa
@Strain 1.09 %,
Temperature 40.0 °C		 8404 psi
@Strain 1.09 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  61.81 MPa
@Strain 1.32 %,
Temperature 90.0 °C		 8965 psi
@Strain 1.32 %,
Temperature 194 °F		 DAM; ISO 11403-1 -2
  62.41 MPa
@Strain 2.64 %,
Temperature 150 °C		 9052 psi
@Strain 2.64 %,
Temperature 302 °F		 DAM; ISO 11403-1 -2
  62.67 MPa
@Strain 4.34 %,
Temperature 180 °C		 9090 psi
@Strain 4.34 %,
Temperature 356 °F		 DAM; ISO 11403-1 -2
  62.83 MPa
@Strain 4.58 %,
Temperature 150 °C		 9113 psi
@Strain 4.58 %,
Temperature 302 °F		 50%RH; ISO 11403-1 -2
  69.8 MPa
@Strain 1.12 %,
Temperature 23.0 °C		 10100 psi
@Strain 1.12 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  72.16 MPa
@Strain 0.730 %,
Temperature 40.0 °C		 10470 psi
@Strain 0.730 %,
Temperature 104 °F		 DAM; ISO 11403-1 -2
  72.26 MPa
@Strain 2.48 %,
Temperature 90.0 °C		 10480 psi
@Strain 2.48 %,
Temperature 194 °F		 50%RH; ISO 11403-1 -2
  74.09 MPa
@Strain 0.770 %,
Temperature 0.000 °C		 10750 psi
@Strain 0.770 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  75.8 MPa
@Strain 4.27 %,
Temperature 150 °C		 11000 psi
@Strain 4.27 %,
Temperature 302 °F		 DAM; ISO 11403-1 -2
  77.8 MPa
@Strain 0.640 %,
Temperature 0.000 °C		 11300 psi
@Strain 0.640 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  78.57 MPa
@Strain 0.680 %,
Temperature 23.0 °C		 11400 psi
@Strain 0.680 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  83.47 MPa
@Strain 3.85 %,
Temperature 90.0 °C		 12110 psi
@Strain 3.85 %,
Temperature 194 °F		 50%RH; ISO 11403-1 -2
  86.45 MPa
@Strain 2.02 %,
Temperature 40.0 °C		 12540 psi
@Strain 2.02 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  87.11 MPa
@Strain 0.660 %,
Temperature -20.0 °C		 12630 psi
@Strain 0.660 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
  88.88 MPa
@Strain 2.47 %,
Temperature 90.0 °C		 12890 psi
@Strain 2.47 %,
Temperature 194 °F		 DAM; ISO 11403-1 -2
  96.04 MPa
@Strain 0.820 %,
Temperature -20.0 °C		 13930 psi
@Strain 0.820 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  97.01 MPa
@Strain 1.88 %,
Temperature 23.0 °C		 14070 psi
@Strain 1.88 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  104.59 MPa
@Strain 3.68 %,
Temperature 90.0 °C		 15170 psi
@Strain 3.68 %,
Temperature 194 °F		 DAM; ISO 11403-1 -2
  104.61 MPa
@Strain 3.10 %,
Temperature 40.0 °C		 15172 psi
@Strain 3.10 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  109.16 MPa
@Strain 1.30 %,
Temperature 0.000 °C		 15832 psi
@Strain 1.30 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  110.82 MPa
@Strain 1.29 %,
Temperature 40.0 °C		 16073 psi
@Strain 1.29 %,
Temperature 104 °F		 DAM; ISO 11403-1 -2
  116.89 MPa
@Strain 1.02 %,
Temperature 0.000 °C		 16953 psi
@Strain 1.02 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  117.58 MPa
@Strain 2.80 %,
Temperature 23.0 °C		 17054 psi
@Strain 2.80 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  121.29 MPa
@Strain 1.14 %,
Temperature 23.0 °C		 17592 psi
@Strain 1.14 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  130.46 MPa
@Strain 1.05 %,
Temperature -20.0 °C		 18922 psi
@Strain 1.05 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
  132.35 MPa
@Strain 1.22 %,
Temperature -20.0 °C		 19196 psi
@Strain 1.22 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  138.12 MPa
@Strain 1.86 %,
Temperature 40.0 °C		 20033 psi
@Strain 1.86 %,
Temperature 104 °F		 DAM; ISO 11403-1 -2
  141.14 MPa
@Strain 1.92 %,
Temperature 0.000 °C		 20471 psi
@Strain 1.92 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  157.62 MPa
@Strain 1.64 %,
Temperature 23.0 °C		 22861 psi
@Strain 1.64 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  159.83 MPa
@Strain 1.53 %,
Temperature 0.000 °C		 23181 psi
@Strain 1.53 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  166.65 MPa
@Strain 1.68 %,
Temperature -20.0 °C		 24171 psi
@Strain 1.68 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  172 MPa
@Strain 1.50 %,
Temperature -20.0 °C		 24900 psi
@Strain 1.50 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
Elongation at Break  3.0 % 3.0 % DAM; ISO 527-1/-2
  5.0 % 5.0 % 50%RH; ISO 527-1/-2
Tensile Modulus  8.00 GPa 1160 ksi 50%RH; ISO 527-1/-2
  11.0 GPa 1600 ksi DAM; ISO 527-1/-2
   2.61587 GPa
@Temperature 170 °C		 379.401 ksi
@Temperature 338 °F		 50%RH; Dynamic; ISO 11403-1 -2
  3.46474 GPa
@Temperature 140 °C		 502.519 ksi
@Temperature 284 °F		 50%RH; Dynamic; ISO 11403-1 -2
  5.12275 GPa
@Temperature 100 °C		 742.993 ksi
@Temperature 212 °F		 50%RH; Dynamic; ISO 11403-1 -2
  7.46522 GPa
@Temperature 75.0 °C		 1082.74 ksi
@Temperature 167 °F		 50%RH; Dynamic; ISO 11403-1 -2
  10.2557 GPa
@Temperature 50.0 °C		 1487.47 ksi
@Temperature 122 °F		 50%RH; Dynamic; ISO 11403-1 -2
  10.396 GPa
@Temperature 35.0 °C		 1507.8 ksi
@Temperature 95.0 °F		 50%RH; Dynamic; ISO 11403-1 -2
Shear Modulus    0.6456 GPa
@Temperature 150 °C		 93.64 ksi
@Temperature 302 °F		 DAM; Dynamic; ISO 11403-1 -2
  0.6985 GPa
@Temperature 110 °C		 101.3 ksi
@Temperature 230 °F		 DAM; Dynamic; ISO 11403-1 -2
  0.7155 GPa
@Temperature 150 °C		 103.8 ksi
@Temperature 302 °F		 50%RH; Dynamic; ISO 11403-1 -2
  0.7554 GPa
@Temperature 110 °C		 109.6 ksi
@Temperature 230 °F		 50%RH; Dynamic; ISO 11403-1 -2
  0.8242 GPa
@Temperature 60.0 °C		 119.5 ksi
@Temperature 140 °F		 50%RH; Dynamic; ISO 11403-1 -2
  1.1883 GPa
@Temperature 60.0 °C		 172.35 ksi
@Temperature 140 °F		 DAM; Dynamic; ISO 11403-1 -2
  1.7067 GPa
@Temperature 10.0 °C		 247.54 ksi
@Temperature 50.0 °F		 50%RH; Dynamic; ISO 11403-1 -2
  1.7991 GPa
@Temperature 10.0 °C		 260.94 ksi
@Temperature 50.0 °F		 DAM; Dynamic; ISO 11403-1 -2
  1.8738 GPa
@Temperature -20.0 °C		 271.78 ksi
@Temperature -4.00 °F		 DAM; Dynamic; ISO 11403-1 -2
  1.9232 GPa
@Temperature -50.0 °C		 278.94 ksi
@Temperature -58.0 °F		 DAM; Dynamic; ISO 11403-1 -2
  2.2716 GPa
@Temperature -20.0 °C		 329.47 ksi
@Temperature -4.00 °F		 50%RH; Dynamic; ISO 11403-1 -2
  2.4465 GPa
@Temperature -50.0 °C		 354.84 ksi
@Temperature -58.0 °F		 50%RH; Dynamic; ISO 11403-1 -2
Secant Modulus    0.755776 GPa
@Strain 8.57 %,
Temperature 200 °C		 109.618 ksi
@Strain 8.57 %,
Temperature 392 °F		 DAM; ISO 11403-1 -2
  1.00449 GPa
@Strain 5.79 %,
Temperature 200 °C		 145.691 ksi
@Strain 5.79 %,
Temperature 392 °F		 DAM; ISO 11403-1 -2
  1.40657 GPa
@Strain 3.35 %,
Temperature 200 °C		 204.009 ksi
@Strain 3.35 %,
Temperature 392 °F		 DAM; ISO 11403-1 -2
  1.79969 GPa
@Strain 6.35 %,
Temperature 40.0 °C		 261.027 ksi
@Strain 6.35 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  2.04401 GPa
@Strain 6.18 %,
Temperature 23.0 °C		 296.463 ksi
@Strain 6.18 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2.26587 GPa
@Strain 1.26 %,
Temperature 200 °C		 328.642 ksi
@Strain 1.26 %,
Temperature 392 °F		 DAM; ISO 11403-1 -2
  2.774 GPa
@Strain 4.00 %,
Temperature 40.0 °C		 402.3 ksi
@Strain 4.00 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  3.40897 GPa
@Strain 3.68 %,
Temperature 23.0 °C		 494.437 ksi
@Strain 3.68 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  3.475 GPa
@Strain 0.200 %,
Temperature 200 °C		 504.0 ksi
@Strain 0.200 %,
Temperature 392 °F		 DAM; ISO 11403-1 -2
  3.98298 GPa
@Strain 2.35 %,
Temperature 40.0 °C		 577.691 ksi
@Strain 2.35 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  4.24637 GPa
@Strain 3.99 %,
Temperature 0.000 °C		 615.893 ksi
@Strain 3.99 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  4.53693 GPa
@Strain 3.71 %,
Temperature 40.0 °C		 658.036 ksi
@Strain 3.71 %,
Temperature 104 °F		 DAM; ISO 11403-1 -2
  4.84398 GPa
@Strain 2.16 %,
Temperature 23.0 °C		 702.571 ksi
@Strain 2.16 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  5.3156 GPa
@Strain 1.09 %,
Temperature 40.0 °C		 770.97 ksi
@Strain 1.09 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  6.23214 GPa
@Strain 1.12 %,
Temperature 23.0 °C		 903.910 ksi
@Strain 1.12 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  6.57037 GPa
@Strain 2.43 %,
Temperature 0.000 °C		 952.966 ksi
@Strain 2.43 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  6.6671 GPa
@Strain 2.31 %,
Temperature 40.0 °C		 967.00 ksi
@Strain 2.31 %,
Temperature 104 °F		 DAM; ISO 11403-1 -2
  6.71818 GPa
@Strain 0.220 %,
Temperature 40.0 °C		 974.405 ksi
@Strain 0.220 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  8.06309 GPa
@Strain 1.49 %,
Temperature 0.000 °C		 1169.47 ksi
@Strain 1.49 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  8.19728 GPa
@Strain 1.47 %,
Temperature 40.0 °C		 1188.93 ksi
@Strain 1.47 %,
Temperature 104 °F		 DAM; ISO 11403-1 -2
  8.256 GPa
@Strain 0.250 %,
Temperature 23.0 °C		 1197 ksi
@Strain 0.250 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  8.81854 GPa
@Strain 2.05 %,
Temperature 23.0 °C		 1279.04 ksi
@Strain 2.05 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  9.15266 GPa
@Strain 2.07 %,
Temperature -20.0 °C		 1327.50 ksi
@Strain 2.07 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  9.62208 GPa
@Strain 0.770 %,
Temperature 0.000 °C		 1395.59 ksi
@Strain 0.770 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  9.68154 GPa
@Strain 1.95 %,
Temperature 0.000 °C		 1404.21 ksi
@Strain 1.95 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  9.88493 GPa
@Strain 0.730 %,
Temperature 40.0 °C		 1433.71 ksi
@Strain 0.730 %,
Temperature 104 °F		 DAM; ISO 11403-1 -2
  10.3395 GPa
@Strain 1.29 %,
Temperature 23.0 °C		 1499.64 ksi
@Strain 1.29 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  10.442 GPa
@Strain 1.38 %,
Temperature -20.0 °C		 1514.5 ksi
@Strain 1.38 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  10.684 GPa
@Strain 1.88 %,
Temperature -20.0 °C		 1549.6 ksi
@Strain 1.88 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
  10.7136 GPa
@Strain 0.220 %,
Temperature 0.000 °C		 1553.90 ksi
@Strain 0.220 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  10.875 GPa
@Strain 0.200 %,
Temperature 40.0 °C		 1577.3 ksi
@Strain 0.200 %,
Temperature 104 °F		 DAM; ISO 11403-1 -2
  11.1359 GPa
@Strain 1.17 %,
Temperature 0.000 °C		 1615.15 ksi
@Strain 1.17 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  11.5544 GPa
@Strain 0.680 %,
Temperature 23.0 °C		 1675.85 ksi
@Strain 0.680 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  11.7122 GPa
@Strain 0.820 %,
Temperature -20.0 °C		 1698.74 ksi
@Strain 0.820 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  12.1562 GPa
@Strain 0.640 %,
Temperature 0.000 °C		 1763.14 ksi
@Strain 0.640 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  12.2 GPa
@Strain 1.18 %,
Temperature -20.0 °C		 1770 ksi
@Strain 1.18 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
  12.3182 GPa
@Strain 0.220 %,
Temperature 23.0 °C		 1786.63 ksi
@Strain 0.220 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  12.568 GPa
@Strain 0.250 %,
Temperature -20.0 °C		 1822.9 ksi
@Strain 0.250 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  13.0458 GPa
@Strain 0.240 %,
Temperature 0.000 °C		 1892.16 ksi
@Strain 0.240 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  13.1985 GPa
@Strain 0.660 %,
Temperature -20.0 °C		 1914.31 ksi
@Strain 0.660 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
  15.4762 GPa
@Strain 0.210 %,
Temperature -20.0 °C		 2244.67 ksi
@Strain 0.210 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
Izod Impact, Notched (ISO)  14.0 kJ/m² 6.66 ft-lb/in² DAM; ISO 180/1A
  16.0 kJ/m² 7.61 ft-lb/in² 50%RH; ISO 180/1A
Charpy Impact Unnotched  8.00 J/cm² 38.1 ft-lb/in² DAM; ISO 179/1eU
  9.50 J/cm² 45.2 ft-lb/in² 50%RH; ISO 179/1eU
   7.50 J/cm²
@Temperature -30.0 °C		 35.7 ft-lb/in²
@Temperature -22.0 °F		 50%RH; ISO 179/1eU
  8.00 J/cm²
@Temperature -30.0 °C		 38.1 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 179/1eU
Charpy Impact, Notched  1.50 J/cm² 7.14 ft-lb/in² DAM; ISO 179/1eA
  1.80 J/cm² 8.57 ft-lb/in² 50%RH; ISO 179/1eA
   1.00 J/cm²
@Temperature -30.0 °C		 4.76 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 179/1eA
  1.00 J/cm²
@Temperature -30.0 °C		 4.76 ft-lb/in²
@Temperature -22.0 °F		 50%RH; ISO 179/1eA
Puncture Energy  6.00 J 4.43 ft-lb DAM; ISO 6603-2
Tensile Creep Modulus, 1 hour    3043.48 MPa
@Pressure 1.00 MPa,
Temperature 200 °C		 441420 psi
@Pressure 145 psi,
Temperature 392 °F		 DAM; ISO 11403-1 -2
  3043.48 MPa
@Pressure 2.00 MPa,
Temperature 200 °C		 441420 psi
@Pressure 290 psi,
Temperature 392 °F		 DAM; ISO 11403-1 -2
  3043.48 MPa
@Pressure 3.00 MPa,
Temperature 200 °C		 441420 psi
@Pressure 435 psi,
Temperature 392 °F		 DAM; ISO 11403-1 -2
  3043.48 MPa
@Pressure 4.00 MPa,
Temperature 200 °C		 441420 psi
@Pressure 580 psi,
Temperature 392 °F		 DAM; ISO 11403-1 -2
  3043.48 MPa
@Pressure 5.00 MPa,
Temperature 200 °C		 441420 psi
@Pressure 725 psi,
Temperature 392 °F		 DAM; ISO 11403-1 -2
  3043.48 MPa
@Pressure 6.00 MPa,
Temperature 200 °C		 441420 psi
@Pressure 870 psi,
Temperature 392 °F		 DAM; ISO 11403-1 -2
  3043.48 MPa
@Pressure 7.00 MPa,
Temperature 200 °C		 441420 psi
@Pressure 1020 psi,
Temperature 392 °F		 DAM; ISO 11403-1 -2
  7400 MPa
@Time 3600 sec		 1.07e+6 psi
@Time 1.00 hour		 50%RH; ISO 899-1
Tensile Creep Modulus, 1000 hours    2333.33 MPa
@Pressure 7.00 MPa,
Temperature 200 °C		 338422 psi
@Pressure 1020 psi,
Temperature 392 °F		 DAM; ISO 11403-1 -2
  2333.33 MPa
@Pressure 6.00 MPa,
Temperature 200 °C		 338422 psi
@Pressure 870 psi,
Temperature 392 °F		 DAM; ISO 11403-1 -2
  2333.33 MPa
@Pressure 5.00 MPa,
Temperature 200 °C		 338422 psi
@Pressure 725 psi,
Temperature 392 °F		 DAM; ISO 11403-1 -2
  2333.33 MPa
@Pressure 4.00 MPa,
Temperature 200 °C		 338422 psi
@Pressure 580 psi,
Temperature 392 °F		 DAM; ISO 11403-1 -2
  2333.33 MPa
@Pressure 3.00 MPa,
Temperature 200 °C		 338422 psi
@Pressure 435 psi,
Temperature 392 °F		 DAM; ISO 11403-1 -2
  2333.33 MPa
@Pressure 2.00 MPa,
Temperature 200 °C		 338422 psi
@Pressure 290 psi,
Temperature 392 °F		 DAM; ISO 11403-1 -2
  2333.33 MPa
@Pressure 1.00 MPa,
Temperature 200 °C		 338422 psi
@Pressure 145 psi,
Temperature 392 °F		 DAM; ISO 11403-1 -2
  5000 MPa
@Time 3.60e+6 sec		 725000 psi
@Time 1000 hour		 50%RH; ISO 899-1
 
Electrical Properties Metric English Comments
Volume Resistivity  1.00e+11 ohm-cm 1.00e+11 ohm-cm 50%RH; IEC 60093
  1.00e+15 ohm-cm 1.00e+15 ohm-cm DAM; IEC 60093
Surface Resistance  1.00e+13 ohm 1.00e+13 ohm 50%RH; IEC 60093
Comparative Tracking Index  450 V 450 V DAM; IEC 60112
 
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow  17.0 µm/m-°C 9.44 µin/in-°F DAM; ISO 11359-1/-2
CTE, linear, Transverse to Flow  85.0 µm/m-°C 47.2 µin/in-°F DAM; ISO 11359-1/-2
Specific Heat Capacity  2.30 J/g-°C 0.550 BTU/lb-°F  
Thermal Conductivity  0.220 W/m-K 1.53 BTU-in/hr-ft²-°F of melt
Melting Point  260 °C 500 °F DAM; 10°C/min; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi)  255 °C 491 °F DAM; ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)  250 °C 482 °F DAM; ISO 75-1/-2
Vicat Softening Point  255 °C 491 °F DAM; 50°C/h 50N; ISO 306
Glass Transition Temp, Tg  80.0 °C 176 °F DAM; 10°C/min; ISO 11357-1/-2
Flammability, UL94    HB
@Thickness 1.50 mm		 HB
@Thickness 0.0591 in		 DAM; IEC 60695-11-10
  HB
@Thickness 0.700 mm		 HB
@Thickness 0.0276 in		 DAM; IEC 60695-11-10
Flame Spread  18 mm/min
@Thickness 1.00 mm		 0.71 in/min
@Thickness 0.0394 in		 ISO 3795 (FMVSS 302)
Oxygen Index  21 % 21 % DAM; ISO 4589-1/-2
 
Descriptive Properties
Additives Lubricants  
  Release agent  
Delivery form Pellets  
Odour class 4 VDA 270
Part Marking Code >PA66-GF35< ISO 11469
Processing Injection Moulding  
Regional Availability Asia Pacific  
  Europe  
  Global  
  Near East/Africa  
  North America  
  South and Central America  
Resin Identification PA66-GF35  
Special characteristics Heat stabilised or stable to heat  
UL recognition UL DAM
  UL DAM
 
干燥处理：如果加工前材料是密封的，那么就没有必要干燥。然而，如果储存容器被打开，那么建议在85℃的热空气中干燥处理。如果湿度大于0.2%，还需要进行105℃，12小时的真空干燥。
颗粒04
上海松翰塑化科技有限公司，供应原料，品质真实,物实价廉。
PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。
欢迎各位客户前来咨询：
联系人： 夏先生  
手  机：13501802636   
QQ    ：205730283  
邮 箱 ：205730283@qq.com 

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/news/

本文链接: http://www.su-jiao.com/news/show-25502.html

免责声明: 本文 PA66 70G35HSLRA4 BK267 耐磨性 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他资讯信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4