PA6 B3ZG8 BK20560 40%玻璃、_产品资讯

PA6 B3ZG8 BK20560 塑胶原料为半透明或不透明乳白包或带黄色颗粒状结晶形聚合物，具有可塑性。密度（g/cm3） 1．10-1．14；拉伸强度(MPa) 60. 0-80．0；洛氏硬度118；熔点252℃；脆化温度-30℃；热分解温度大于350℃；连续耐热80-120℃；冲击强度（kJ/m2） 60-100；静弯曲强度(MPa) 1 00-120；马丁耐热(℃) 50-60；弯曲弹性模量 (MPa) 2000～3000；体积电阻率（Ωcm） 1.83×1015；平衡吸水率2．5%；介电常数 1．63。

颗粒样图：

、

应用：广泛用于制造机械、汽车、化学与电气装置的零件，如齿轮、滚子、滑轮、辊轴、泵体中叶轮、风扇叶片、高压密封围、阀座、垫片、衬套、各种把手、支撑架、电线包内层等。

上海松翰塑化科技有限公司，供应原料，品质真实,物实价廉。

PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。

欢迎各位客户前来咨询：

联系人：夏先生

手机：13501802636

QQ ：205730283

邮箱：205730283@qq.com

物性表:

Physical Properties	Metric	English	Comments

Density	1.40 g/cc	0.0506 lb/in³	ISO 1183
Water Absorption	4.7 - 5.3 %	4.7 - 5.3 %	Saturation; ISO 62
Moisture Absorption at Equilibrium	1.4 - 1.8 %	1.4 - 1.8 %	23°C; 50% RH; ISO 62
Viscosity Measurement	160	160	ISO 307
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in	restricted
Melt Flow	12.6 g/10 min @Load 5.00 kg, Temperature 275 °C	12.6 g/10 min @Load 11.0 lb, Temperature 527 °F	ISO 1133

Mechanical Properties	Metric	English	Comments
Ball Indentation Hardness	84.0 MPa @Load 36.5 kg, Time 30.0 sec	12200 psi @Load 80.5 lb, Time 0.00833 hour	ISO 2039-1
Tensile Strength, Yield	165 MPa	23900 psi	50 mm/min; ISO 527-1/-2
Elongation at Yield	4.6 %	4.6 %	50 mm/min; ISO 527-1/-2
Modulus of Elasticity	11.6 GPa	1680 ksi	ISO 527-1/-2
Flexural Strength	250 MPa	36300 psi	at max force; ISO 178
Flexural Modulus	9.50 GPa	1380 ksi	ISO 178
Izod Impact, Notched (ISO)	14.0 kJ/m² @Temperature -30.0 °C	6.66 ft-lb/in² @Temperature -22.0 °F	ISO 180/A
	22.0 kJ/m² @Temperature 23.0 °C	10.5 ft-lb/in² @Temperature 73.4 °F	ISO 180/A
Charpy Impact Unnotched	10.5 J/cm² @Temperature -30.0 °C	50.0 ft-lb/in² @Temperature -22.0 °F	ISO 179/1eU
	11.0 J/cm² @Temperature 23.0 °C	52.3 ft-lb/in² @Temperature 73.4 °F	ISO 179/1eU
Charpy Impact, Notched	1.50 J/cm² @Temperature -30.0 °C	7.14 ft-lb/in² @Temperature -22.0 °F	ISO 179/1eA
	2.40 J/cm² @Temperature 23.0 °C	11.4 ft-lb/in² @Temperature 73.4 °F	ISO 179/1eA

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+13 ohm-cm	1.00e+13 ohm-cm	IEC 60093
Surface Resistance	1.00e+12 ohm	1.00e+12 ohm	IEC 60093
Dielectric Constant	4.0 @Frequency 1.00 Hz	4.0 @Frequency 1.00 Hz	IEC 60250
Dissipation Factor	0.020 @Frequency 1.00e+6 Hz	0.020 @Frequency 1.00e+6 Hz	IEC 60250

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	10.0 - 20.0 µm/m-°C @Temperature 23.0 - 80.0 °C	5.56 - 11.1 µin/in-°F @Temperature 73.4 - 176 °F	DIN 11359-1/-2
CTE, linear, Transverse to Flow	50.0 - 60.0 µm/m-°C @Temperature 23.0 - 80.0 °C	27.8 - 33.3 µin/in-°F @Temperature 73.4 - 176 °F	DIN 11359-1/-2
Thermal Conductivity	0.360 W/m-K	2.50 BTU-in/hr-ft²-°F	DIN 52612
Melting Point	220 °C	428 °F	DIN 53765
Maximum Service Temperature, Air	180 °C	356 °F
Deflection Temperature at 0.46 MPa (66 psi)	220 °C	428 °F	ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)	205 °C	401 °F	ISO 75-1/-2
Decomposition Temperature	>= 300 °C	>= 572 °F
Flammability, UL94	HB @Thickness 1.60 mm	HB @Thickness 0.0630 in

Processing Properties	Metric	English	Comments
Processing Temperature	80.0 °C	176 °F	Hopper Throat
Zone 1	260 °C	500 °F	Feed Zone
Zone 2	270 °C	518 °F	Compression
Zone 3	280 °C	536 °F	Metering-zone
Zone 4	280 °C	536 °F	Nozzle
Melt Temperature	280 °C	536 °F	Optimal
	270 - 290 °C	518 - 554 °F	Injection-molding/Extrusion
Mold Temperature	80.0 °C	176 °F	Optimal
	80.0 - 90.0 °C	176 - 194 °F	Injection-molding
Drying Temperature	80.0 °C	176 °F
Dry Time	4 hour	4 hour
Moisture Content	0.030 - 0.060 %	0.030 - 0.060 %	Optimal
	<= 0.15 %	<= 0.15 %

Descriptive Properties
Color	BK 20560
Commercial Status	Europe
Ignition Temperature	>400°C	ASTM D129
Peripheral Screw Speed	< 0.3 m/s