塑胶原料之家
  1. 首页
  2. 资讯
  3. 产品资讯
  4. PBT/SK602 NC010/ (PBT) 、

PBT/SK602 NC010/ (PBT) 、

PBT/SK602 NC010 对于有玻璃添加剂类型的材料，PBT/SK602 NC010 流程方向的收缩率可以减小，PBT/SK602 NC010 但与流程垂直方向的收缩率基本上和普通材料没有区别。一般材料收缩率在1.5%~2.8%之间。
 PBT/SK602 NC010 是最坚韧的工程热塑材料之一，它是半结晶材料，有非常好的化学稳定性、机械强度、电绝缘特性和热稳定性。这些材料在很广的环境条件下都有很好的稳定性。PBT吸湿特性很弱。非增强型PBT的张力强度为50MPa，玻璃添加剂型的PBT张力强度为170MPa。玻璃添加剂过多将导致材料变脆。
原料颗粒图：3cb92a240a17ac78-f9799ed1752670e2-c4558388bc1cb190921a5f8bd2da781b 、
 
物性表：
 
Physical Properties Metric English Comments
Density  1.22 g/cc 0.0441 lb/in³  
  1.41 g/cc 0.0509 lb/in³ ISO 1183
Water Absorption  0.42 %
@Thickness 2.00 mm		 0.42 %
@Thickness 0.0787 in		 Sim. to ISO 62
Moisture Absorption  0.170 %
@Thickness 2.00 mm		 0.170 %
@Thickness 0.0787 in		 Sim. to ISO 62
Viscosity    77748.5 cP
@Shear Rate 5000 1/s,
Temperature 260 °C		 77748.5 cP
@Shear Rate 5000 1/s,
Temperature 500 °F		 ISO 11403-1 -2
  90076.9 cP
@Shear Rate 5000 1/s,
Temperature 250 °C		 90076.9 cP
@Shear Rate 5000 1/s,
Temperature 482 °F		 ISO 11403-1 -2
  105363 cP
@Shear Rate 5000 1/s,
Temperature 240 °C		 105363 cP
@Shear Rate 5000 1/s,
Temperature 464 °F		 ISO 11403-1 -2
  224563 cP
@Shear Rate 500 1/s,
Temperature 260 °C		 224563 cP
@Shear Rate 500 1/s,
Temperature 500 °F		 ISO 11403-1 -2
  274429 cP
@Shear Rate 500 1/s,
Temperature 250 °C		 274429 cP
@Shear Rate 500 1/s,
Temperature 482 °F		 ISO 11403-1 -2
  336356 cP
@Shear Rate 500 1/s,
Temperature 240 °C		 336356 cP
@Shear Rate 500 1/s,
Temperature 464 °F		 ISO 11403-1 -2
Viscosity Test  105 cm³/g 105 cm³/g ISO 307 1157 1628
Linear Mold Shrinkage, Flow  0.0040 cm/cm 0.0040 in/in ISO 294-4 2577
Linear Mold Shrinkage, Transverse  0.011 cm/cm 0.011 in/in ISO 294-4 2577
 
Mechanical Properties Metric English Comments
Tensile Strength at Break  109 MPa 15800 psi ISO 527-1/-2
Tensile Stress    14.41 MPa
@Strain 0.560 %,
Temperature 90.0 °C		 2090 psi
@Strain 0.560 %,
Temperature 194 °F		 ISO 11403-1 -2
  18.07 MPa
@Strain 0.320 %,
Temperature 23.0 °C		 2621 psi
@Strain 0.320 %,
Temperature 73.4 °F		 ISO 11403-1 -2
  18.34 MPa
@Strain 0.450 %,
Temperature 40.0 °C		 2660 psi
@Strain 0.450 %,
Temperature 104 °F		 ISO 11403-1 -2
  41.62 MPa
@Strain 2.02 %,
Temperature 90.0 °C		 6036 psi
@Strain 2.02 %,
Temperature 194 °F		 ISO 11403-1 -2
  52.91 MPa
@Strain 1.54 %,
Temperature 40.0 °C		 7674 psi
@Strain 1.54 %,
Temperature 104 °F		 ISO 11403-1 -2
  54.86 MPa
@Strain 3.57 %,
Temperature 90.0 °C		 7957 psi
@Strain 3.57 %,
Temperature 194 °F		 ISO 11403-1 -2
  57.84 MPa
@Strain 5.03 %,
Temperature 90.0 °C		 8389 psi
@Strain 5.03 %,
Temperature 194 °F		 ISO 11403-1 -2
  67.19 MPa
@Strain 1.30 %,
Temperature 23.0 °C		 9745 psi
@Strain 1.30 %,
Temperature 73.4 °F		 ISO 11403-1 -2
  77.38 MPa
@Strain 2.80 %,
Temperature 40.0 °C		 11220 psi
@Strain 2.80 %,
Temperature 104 °F		 ISO 11403-1 -2
  83.47 MPa
@Strain 3.88 %,
Temperature 40.0 °C		 12110 psi
@Strain 3.88 %,
Temperature 104 °F		 ISO 11403-1 -2
  97.45 MPa
@Strain 2.25 %,
Temperature 23.0 °C		 14130 psi
@Strain 2.25 %,
Temperature 73.4 °F		 ISO 11403-1 -2
  108.8 MPa
@Strain 3.23 %,
Temperature 23.0 °C		 15780 psi
@Strain 3.23 %,
Temperature 73.4 °F		 ISO 11403-1 -2
   10.0 MPa
@Strain 0.230 %,
Time 3.60e+6 sec		 1450 psi
@Strain 0.230 %,
Time 1000 hour		 isochronous; ISO 11403-1 -2
  10.0 MPa
@Strain 0.260 %,
Time 3.60e+7 sec		 1450 psi
@Strain 0.260 %,
Time 10000 hour		 isochronous; ISO 11403-1 -2
  10.0 MPa
@Strain 0.210 %,
Time 360000 sec		 1450 psi
@Strain 0.210 %,
Time 100 hour		 isochronous; ISO 11403-1 -2
  20.0 MPa
@Strain 0.390 %,
Time 36000 sec		 2900 psi
@Strain 0.390 %,
Time 10.0 hour		 isochronous; ISO 11403-1 -2
  20.0 MPa
@Strain 0.360 %,
Time 3600 sec		 2900 psi
@Strain 0.360 %,
Time 1.00 hour		 isochronous; ISO 11403-1 -2
  50.0 MPa
@Strain 0.990 %,
Time 3600 sec		 7250 psi
@Strain 0.990 %,
Time 1.00 hour		 isochronous; ISO 11403-1 -2
  50.0 MPa
@Strain 1.03 %,
Time 36000 sec		 7250 psi
@Strain 1.03 %,
Time 10.0 hour		 isochronous; ISO 11403-1 -2
  50.0 MPa
@Strain 1.62 %,
Time 3.60e+7 sec		 7250 psi
@Strain 1.62 %,
Time 10000 hour		 isochronous; ISO 11403-1 -2
  50.0 MPa
@Strain 1.34 %,
Time 3.60e+6 sec		 7250 psi
@Strain 1.34 %,
Time 1000 hour		 isochronous; ISO 11403-1 -2
  50.0 MPa
@Strain 1.16 %,
Time 360000 sec		 7250 psi
@Strain 1.16 %,
Time 100 hour		 isochronous; ISO 11403-1 -2
Elongation at Break  3.5 % 3.5 % ISO 527-1/-2
Tensile Modulus  5.80 GPa 841 ksi ISO 527-1/-2
Flexural Strength  160 MPa 23200 psi ISO 178
Flexural Modulus  5.20 GPa 754 ksi ISO 178
Shear Modulus    0.328 GPa
@Temperature 160 °C		 47.6 ksi
@Temperature 320 °F		 Dynamic; ISO 11403-1 -2
  0.393 GPa
@Temperature 120 °C		 57.0 ksi
@Temperature 248 °F		 Dynamic; ISO 11403-1 -2
  0.568 GPa
@Temperature 70.0 °C		 82.4 ksi
@Temperature 158 °F		 Dynamic; ISO 11403-1 -2
  1.42 GPa
@Temperature 20.0 °C		 206 ksi
@Temperature 68.0 °F		 Dynamic; ISO 11403-1 -2
  1.56 GPa
@Temperature -20.0 °C		 226 ksi
@Temperature -4.00 °F		 Dynamic; ISO 11403-1 -2
  1.62 GPa
@Temperature -50.0 °C		 235 ksi
@Temperature -58.0 °F		 Dynamic; ISO 11403-1 -2
Secant Modulus    2.55728 GPa
@Strain 3.16 %,
Temperature 40.0 °C		 370.908 ksi
@Strain 3.16 %,
Temperature 104 °F		 ISO 11403-1 -2
  3.43571 GPa
@Strain 1.54 %,
Temperature 40.0 °C		 498.315 ksi
@Strain 1.54 %,
Temperature 104 °F		 ISO 11403-1 -2
  3.98456 GPa
@Strain 2.59 %,
Temperature 23.0 °C		 577.921 ksi
@Strain 2.59 %,
Temperature 73.4 °F		 ISO 11403-1 -2
  4.07556 GPa
@Strain 0.450 %,
Temperature 40.0 °C		 591.119 ksi
@Strain 0.450 %,
Temperature 104 °F		 ISO 11403-1 -2
  5.16846 GPa
@Strain 1.30 %,
Temperature 23.0 °C		 749.633 ksi
@Strain 1.30 %,
Temperature 73.4 °F		 ISO 11403-1 -2
  5.64688 GPa
@Strain 0.320 %,
Temperature 23.0 °C		 819.023 ksi
@Strain 0.320 %,
Temperature 73.4 °F		 ISO 11403-1 -2
Izod Impact, Notched (ISO)  6.50 kJ/m² 3.09 ft-lb/in² ISO 180/1A
   6.00 kJ/m²
@Temperature -30.0 °C		 2.86 ft-lb/in²
@Temperature -22.0 °F		 ISO 180/1A
  6.00 kJ/m²
@Temperature -40.0 °C		 2.86 ft-lb/in²
@Temperature -40.0 °F		 ISO 180/1A
Izod Impact, Unnotched (ISO)  50.0 kJ/m² 23.8 ft-lb/in² ISO 180/1U
   30.0 kJ/m²
@Temperature -40.0 °C		 14.3 ft-lb/in²
@Temperature -40.0 °F		 ISO 180/1U
  50.0 kJ/m²
@Temperature -30.0 °C		 23.8 ft-lb/in²
@Temperature -22.0 °F		 ISO 180/1U
Charpy Impact Unnotched  4.50 J/cm² 21.4 ft-lb/in² ISO 179/1eU
   4.00 J/cm²
@Temperature -40.0 °C		 19.0 ft-lb/in²
@Temperature -40.0 °F		 ISO 179/1eU
  4.50 J/cm²
@Temperature -30.0 °C		 21.4 ft-lb/in²
@Temperature -22.0 °F		 ISO 179/1eU
Charpy Impact, Notched  0.700 J/cm² 3.33 ft-lb/in² ISO 179/1eA
   0.700 J/cm²
@Temperature -30.0 °C		 3.33 ft-lb/in²
@Temperature -22.0 °F		 ISO 179/1eA
  0.700 J/cm²
@Temperature -40.0 °C		 3.33 ft-lb/in²
@Temperature -40.0 °F		 ISO 179/1eA
Tensile Creep Modulus, 1 hour    2010.05 MPa
@Pressure 40.0 MPa,
Temperature 60.0 °C		 291534 psi
@Pressure 5800 psi,
Temperature 140 °F		 ISO 11403-1 -2
  2157.19 MPa
@Pressure 35.0 MPa,
Temperature 60.0 °C		 312875 psi
@Pressure 5080 psi,
Temperature 140 °F		 ISO 11403-1 -2
  2343.75 MPa
@Pressure 30.0 MPa,
Temperature 60.0 °C		 339933 psi
@Pressure 4350 psi,
Temperature 140 °F		 ISO 11403-1 -2
  2544.36 MPa
@Pressure 25.0 MPa,
Temperature 60.0 °C		 369029 psi
@Pressure 3630 psi,
Temperature 140 °F		 ISO 11403-1 -2
  2739.73 MPa
@Pressure 20.0 MPa,
Temperature 60.0 °C		 397365 psi
@Pressure 2900 psi,
Temperature 140 °F		 ISO 11403-1 -2
  2906.95 MPa
@Pressure 15.0 MPa,
Temperature 60.0 °C		 421618 psi
@Pressure 2180 psi,
Temperature 140 °F		 ISO 11403-1 -2
  3030.3 MPa
@Pressure 10.0 MPa,
Temperature 60.0 °C		 439510 psi
@Pressure 1450 psi,
Temperature 140 °F		 ISO 11403-1 -2
  3107.23 MPa
@Pressure 5.00 MPa,
Temperature 60.0 °C		 450666 psi
@Pressure 725 psi,
Temperature 140 °F		 ISO 11403-1 -2
  5050.5 MPa
@Pressure 50.0 MPa,
Temperature 23.0 °C		 732510 psi
@Pressure 7250 psi,
Temperature 73.4 °F		 ISO 11403-1 -2
  5333.33 MPa
@Pressure 40.0 MPa,
Temperature 23.0 °C		 773536 psi
@Pressure 5800 psi,
Temperature 73.4 °F		 ISO 11403-1 -2
  5454.55 MPa
@Pressure 30.0 MPa,
Temperature 23.0 °C		 791117 psi
@Pressure 4350 psi,
Temperature 73.4 °F		 ISO 11403-1 -2
  5555.56 MPa
@Pressure 20.0 MPa,
Temperature 23.0 °C		 805767 psi
@Pressure 2900 psi,
Temperature 73.4 °F		 ISO 11403-1 -2
  5637.5 MPa
@Pressure 10.0 MPa,
Temperature 23.0 °C		 817650 psi
@Pressure 1450 psi,
Temperature 73.4 °F		 ISO 11403-1 -2
  5300 MPa
@Time 3600 sec		 769000 psi
@Time 1.00 hour		 ISO 899-1
Tensile Creep Modulus, 1000 hours    1369.86 MPa
@Pressure 40.0 MPa,
Temperature 60.0 °C		 198682 psi
@Pressure 5800 psi,
Temperature 140 °F		 ISO 11403-1 -2
  1471.03 MPa
@Pressure 35.0 MPa,
Temperature 60.0 °C		 213355 psi
@Pressure 5080 psi,
Temperature 140 °F		 ISO 11403-1 -2
  1587.3 MPa
@Pressure 30.0 MPa,
Temperature 60.0 °C		 230220 psi
@Pressure 4350 psi,
Temperature 140 °F		 ISO 11403-1 -2
  1681.08 MPa
@Pressure 25.0 MPa,
Temperature 60.0 °C		 243820 psi
@Pressure 3630 psi,
Temperature 140 °F		 ISO 11403-1 -2
  1754.39 MPa
@Pressure 20.0 MPa,
Temperature 60.0 °C		 254453 psi
@Pressure 2900 psi,
Temperature 140 °F		 ISO 11403-1 -2
  1846.97 MPa
@Pressure 15.0 MPa,
Temperature 60.0 °C		 267881 psi
@Pressure 2180 psi,
Temperature 140 °F		 ISO 11403-1 -2
  1960.78 MPa
@Pressure 10.0 MPa,
Temperature 60.0 °C		 284388 psi
@Pressure 1450 psi,
Temperature 140 °F		 ISO 11403-1 -2
  2046.78 MPa
@Pressure 5.00 MPa,
Temperature 60.0 °C		 296861 psi
@Pressure 725 psi,
Temperature 140 °F		 ISO 11403-1 -2
  3731.34 MPa
@Pressure 50.0 MPa,
Temperature 23.0 °C		 541186 psi
@Pressure 7250 psi,
Temperature 73.4 °F		 ISO 11403-1 -2
  4000 MPa
@Pressure 40.0 MPa,
Temperature 23.0 °C		 580000 psi
@Pressure 5800 psi,
Temperature 73.4 °F		 ISO 11403-1 -2
  4142.15 MPa
@Pressure 30.0 MPa,
Temperature 23.0 °C		 600769 psi
@Pressure 4350 psi,
Temperature 73.4 °F		 ISO 11403-1 -2
  4166.67 MPa
@Pressure 20.0 MPa,
Temperature 23.0 °C		 604325 psi
@Pressure 2900 psi,
Temperature 73.4 °F		 ISO 11403-1 -2
  4347.83 MPa
@Pressure 10.0 MPa,
Temperature 23.0 °C		 630601 psi
@Pressure 1450 psi,
Temperature 73.4 °F		 ISO 11403-1 -2
  4300 MPa
@Time 3.60e+6 sec		 624000 psi
@Time 1000 hour		 ISO 899-1
 
Electrical Properties Metric English Comments
Volume Resistivity  >= 1.00e+15 ohm-cm >= 1.00e+15 ohm-cm IEC 60093
Surface Resistance  1.00e+15 ohm 1.00e+15 ohm IEC 60093
Dielectric Constant    3.5
@Frequency 1.00e+6 Hz		 3.5
@Frequency 1.00e+6 Hz		 IEC 60250
  4.1
@Frequency 100 Hz		 4.1
@Frequency 100 Hz		 IEC 60250
Dielectric Strength  27.0 kV/mm 686 kV/in IEC 60243-1
Dissipation Factor    0.0020
@Frequency 100 Hz		 0.0020
@Frequency 100 Hz		 IEC 60250
  0.0080
@Frequency 1000 Hz		 0.0080
@Frequency 1000 Hz		 ASTM D150
  0.020
@Frequency 1.00e+6 Hz		 0.020
@Frequency 1.00e+6 Hz		 IEC 60250
  0.020
@Frequency 1.00e+6 Hz		 0.020
@Frequency 1.00e+6 Hz		 ASTM D150
Comparative Tracking Index  350 V 350 V IEC 60112
 
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow  50.0 µm/m-°C 27.8 µin/in-°F ISO 11359-1/-2
CTE, linear, Transverse to Flow  110 µm/m-°C 61.1 µin/in-°F ISO 11359-1/-2
Specific Heat Capacity  1.90 J/g-°C 0.454 BTU/lb-°F  
Thermal Conductivity  0.240 W/m-K 1.67 BTU-in/hr-ft²-°F of melt
Melting Point  225 °C 437 °F 10°C/min; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi)  220 °C 428 °F ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)  200 °C 392 °F ISO 75-1/-2
Vicat Softening Point  205 °C 401 °F 50°C/h 50N; ISO 306
Glass Transition Temp, Tg  55.0 °C 131 °F 10°C/min; ISO 11357-1/-2
Flammability, UL94    HB
@Thickness 1.50 mm		 HB
@Thickness 0.0591 in		 IEC 60695-11-10
  HB
@Thickness 0.800 mm		 HB
@Thickness 0.0315 in		 IEC 60695-11-10
Flame Spread  30 mm/min
@Thickness 1.00 mm		 1.2 in/min
@Thickness 0.0394 in		 ISO 3795 (FMVSS 302)
Oxygen Index  19 % 19 % ISO 4589-1/-2
 
Descriptive Properties
Additives Release agent  
Delivery form Pellets  
Part Marking Code >PBT-GF15< ISO 11469
Processing Injection Moulding  
Regional Availability Asia Pacific  
  Europe  
  Global  
  Near East/Africa  
  North America  
  South and Central America  
Resin Identification PBT-GF15  
UL recognition UL  
  UL
上海松翰塑化科技有限公司，供应原料，品质真实,物实价廉。
PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。
欢迎各位客户前来咨询：
联系人： 夏先生  
手  机：13501802636   
QQ    ：205730283  
邮 箱 ：205730283@qq.com 
 

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/news/

本文链接: http://www.su-jiao.com/news/show-27804.html

免责声明: 本文 PBT/SK602 NC010/ (PBT) 、 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他资讯信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4