Hytrel® G3548L|TPC|DuPont物性表报告及物性特性介绍,Hytrel® G3548L|TPC|DuPont注塑参数详情-塑料物性表查询网

流变性能(Rheological properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔体体积流动速率(Melt volume-flow rate) (MVR)	10	cm³/10min	ISO 1133
温度(Temperature)	190	°C	ISO 1133
负载(Load)	2.16	kg	ISO 1133
成型收缩(Molding shrinkage) (parallel)	0.9	%	ISO 294-4, 2577
成型收缩(Molding shrinkage) (normal)	0.9	%	ISO 294-4, 2577

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	25	MPa	ISO 527-1/-2
Stress at 50% strain	7	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	>50	%	ISO 527-1/-2
Stress at 10% elongation	3	MPa	ISO 527-1/-2
Stress at 100% elongation	9	MPa	ISO 527-1/-2
破坏时应变(Strain at break) TPE	190	%	ISO 527-1/-2
破坏时应变(Stress at break) TPE	11	MPa	ISO 527-1/-2
压缩设置下的恒应变(Compression Set under constant strain) (70°C)	60	%	ISO 815
抗拉强度(撕裂强度(Tear strength))	80	kN/m	ISO 34-1
Shore D hardness (15s)	26	-	ISO 868
ASTM数据(ASTM Data)
抗拉强度(Tensile Strength) at Break	10.3	MPa	ASTM D 638
断裂伸长率(Elongation at Break)	200	%	ASTM D 638
弯曲弹性模量(弯曲弹性模量(Flexural Modulus))	32.4	MPa	ASTM D 790
Shore D Hardness	35	-	ASTM D 2240
悬臂梁式冲击切口 (1/8 in)	N	kJ/m	ASTM D 256
悬臂梁式冲击切口 (Low-温度(Temperature))	N	kJ/m	ASTM D 256
温度(Temperature)	-40	°C	ASTM D 256

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔化温度(熔化温度(Melting temperature)) (10°C/min)	154	°C	ISO 11357-1/-3
玻璃化转变温度(Glass transition temperature) (10°C/min)	-45	°C	ISO 11357-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	180	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	240	E-6/K	ISO 11359-1/-2
燃烧性(球压痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB	class	IEC 60695-11-10
厚度测试(Thickness tested)	1.5	mm	IEC 60695-11-10
UL 识别(recognition)	UL	-	-
燃烧性(球压痕硬度(Burning behav)). at thickness h	HB	class	IEC 60695-11-10
厚度测试(Thickness tested)	3.0	mm	IEC 60695-11-10
UL 识别(recognition)	UL	-	-
ASTM数据(ASTM Data)
UL 94 阻燃等级(Flame rating)	HB	-	UL 94
厚度测试(Thickness tested)	1.5	mm	-
热膨胀系数(Coefficient of Thermal Expansion) (MD)	180	E-6/K	ASTM D 696
热膨胀系数(Coefficient of Thermal Expansion) (TD)	240	E-6/K	ASTM D 696
熔化温度(Melting 温度(Temperature))	156	°C	ASTM D 3418

流变计算属性(Rheological calculation properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
密度(Density) of melt	1030	kg/m³	-
熔体热导率(Thermal conductivity of melt)	0.16	W/(m K)	-
规格的热容融化(Spec. heat capacity of melt)	2140	J/(kg K)	-
Eff. thermal diffusivity	5.44E-8	m²/s	-
喷射温度(Ejection temperature)	70	°C	-

Diagrams ISO 1817 Liquid C) (23°C)

ISO 1817 Liquid 4) (23°C)

ISO 1817 Liquid F) (23°C)

ISO 1817 Liquid F) (90°C)

ISO 1817 Liquid F) (>90°C)

Salt solutions

4 Brake fluid (130°C)