RESFORM POM|POM|Polimarky物性表报告及物性特性介绍,RESFORM POM|POM|Polimarky注塑参数详情-塑料物性表查询网

RESFORM POM|POM|Polimarky

RESFORM POM|POM|Polimarky 物性表: RESFORM POM|POM|Polimarky物性表及特性介绍,RESFORM POM|POM|Polimarky注塑参数详情,如需RESFORM POM|POM|Polimarky下载, 可到相关下载区下载

流变性能(Rheological properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
熔体流动指数(熔体流动指数(Melt flow index)) (MFI)	9	g/10min	ISO 1133
MFI温度(MFI temperature)	190	°C	ISO 1133
MFI负载(MFI load)	2.16	kg	ISO 1133

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
拉伸模量(Tensile Modulus)	2400	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	35	%	ISO 527-1/-2
简支梁冲击强度(Charpy impact strength) (+23°C)	6	kJ/m²	ISO 179/1eU

其他属性(Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
密度(Density)	1440	kg/m³	ISO 1183

CharacteristicsRegional AvailabilityEuropeDisclaimerCopyright M-Base Engineering+Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

关键词:
RESFORM POM|POM|Polimarky