- 熔体流动速率 [g/10min]: 10.0
- 密度 [g/cm3]: 1.11
- 缺口冲击强度: 0.534
- 拉伸强度 [MPa]: 71.98
- 弯曲模量 [MPa]: 5.599
- 硬度: 105.0
- 热变形温度 [℃]: 156.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.11 g/cc | 0.0401 lb/in³ | ASTM D792 |
| Linear Mold Shrinkage | 0.0010 cm/cm | 0.0010 in/in | MD; ASTM D955 |
| Melt Flow | 10 g/10 min | 10 g/10 min | ASTM D1238 |
| Ash | 30 % | 30 % | ASTM D2584 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell R | 105 | 105 | ASTM D785 |
| Tensile Strength at Break | 69.98 MPa | 10150 psi | ASTM D638 |
| Tensile Strength, Yield | 71.98 MPa | 10440 psi | ASTM D638 |
| Elongation at Break | 5.0 % | 5.0 % | ASTM D638 |
| Elongation at Yield | 4.0 % | 4.0 % | ASTM D638 |
| Tensile Modulus | 4.000 GPa | 580.1 ksi | ASTM D638 |
| Flexural Strength | 89.98 MPa | 13050 psi | ASTM D790 |
| Flexural Modulus | 5.599 GPa | 812.1 ksi | ASTM D790 |
| Izod Impact, Notched | 0.534 J/cm | 1.00 ft-lb/in | ASTM D256 |
| Thermal Properties | Metric | English | Comments |
| Deflection Temperature at 0.46 MPa (66 psi) | 156 °C | 313 °F | ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 143 °C | 289 °F | |