| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Specific Gravity | 1.45 - 1.75 g/cc | 1.45 - 1.75 g/cc | |||
| Volatile Organic Compounds (VOC) Content | 888 g/l | 888 g/l | |||
| Thickness | 50.0 microns | 1.97 mil | Recommended | ||
| Electrical Properties | Metric | English | Comments | ||
| Surface Resistivity per Square | <= 0.15 ohm | <= 0.15 ohm | |||
| Thermal Properties | Metric | English | Comments | ||
| Maximum Service Temperature, Air | 125 °C | 257 °F | |||
| Minimum Service Temperature, Air | -65.0 °C | -85.0 °F | |||
| Processing Properties | Metric | English | Comments | ||
| Cure Time | 60.0 min @Temperature 121 °C | 1.00 hour @Temperature 250 °F | |||
| 120 min @Temperature 24.0 °C | 2.00 hour @Temperature 75.2 °F | ||||
| 240 min @Temperature 79.0 °C | 4.00 hour @Temperature 174 °F | ||||
| 10100 min @Temperature 24.0 °C | 168 hour @Temperature 75.2 °F | ||||
| Pot Life | 480 min | 480 min | |||
| Shelf Life | 9.00 Month | 9.00 Month | |||
| Descriptive Properties | |||||
| Binder | Epoxy | ||||
| Consistency | Medium Fluid | ||||
| Coverage | 453/gal | @ 0.001 in thick | |||
| 718 sq. ft2/gal/mil thickness | |||||
| Cross Hatch Adhesion | 5B | ASTM D3359-78 Method B) | |||
| Electrical Conductivity | 150 mOhm/sq | @ 2 mils thickness | |||
| Filler | Ag/Cu | ||||
| High Temperature Test | 129 | 240 hrs. @ 85°C, Initial Resistance | |||
| 151 | 240 hrs. @ 85°C, Final Resistance | ||||
| Humidity Test | 125 | 240 hrs. @ 65°C and 85-95% RH, Initial Resistance | |||
| 125 | 240 hrs. @ 65°C and 85-95% RH, Initial Resistance | ||||
| Low Temperature Test | 133 | 240 hrs. @ -40°C, Initial Resistance | |||
| 137 | 240 hrs. @ -40°C, Final Resistance | ||||
| Mix Ratio | 100:28 | ||||
| Salt Fog Test | 119 | 96 hrs. Initial Resistance; ASTM B-117 | |||
| 196 | 96 hrs. Final Resistance; ASTM B-117 | ||||
| Suggested Spraying Viscosity #2 Zahn Cup | 19 - 27 sec | ||||
| Work Life | 8 hrs. | ||||
