Overview of materials for Phenolic, Novolac, Heat Resistant Grade, Filled

Overview of materials for Phenolic, Novolac, Heat Resistant Grade, Filled 物性表: Overview of materials for Phenolic, Novolac, Heat Resistant Grade, Filled物性表及特性介绍,Overview of materials for Phenolic, Novolac, Heat Resistant Grade, Filled注塑参数详情,如需Overview of materials for Phenolic, Novolac, Heat Resistant Grade, Filled下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.47
  • 吸水率 [%]: 0.2
  • 断裂伸长率 [%]: 69.0
  • 弯曲强度 [MPa]: 41.0
  • 弯曲模量 [MPa]: 8.16
 
Physical PropertiesMetricEnglishComments
Density 1.47 - 1.61 g/cc0.0531 - 0.0582 lb/in³Average value: 1.52 g/cc Grade Count:12
Apparent Bulk Density 0.600 - 0.740 g/cc0.0217 - 0.0267 lb/in³Average value: 0.670 g/cc Grade Count:12
Water Absorption 0.200 - 0.300 %0.200 - 0.300 %Average value: 0.240 % Grade Count:12
Linear Mold Shrinkage 0.00330 - 0.0120 cm/cm0.00330 - 0.0120 in/inAverage value: 0.00687 cm/cm Grade Count:12
 
Mechanical PropertiesMetricEnglishComments
Hardness, Rockwell E 79.0 - 87.079.0 - 87.0Average value: 82.0 Grade Count:4
Tensile Strength, Ultimate 41.0 - 60.5 MPa5950 - 8770 psiAverage value: 50.5 MPa Grade Count:12
Elongation at Break 0.740 - 0.860 %0.740 - 0.860 %Average value: 0.813 % Grade Count:4
Modulus of Elasticity 8.80 - 13.1 GPa1280 - 1900 ksiAverage value: 10.3 GPa Grade Count:6
Flexural Yield Strength 69.0 - 89.8 MPa10000 - 13000 psiAverage value: 78.9 MPa Grade Count:12
Flexural Modulus 8.16 - 10.4 GPa1180 - 1510 ksiAverage value: 9.12 GPa Grade Count:10
Compressive Yield Strength 145 - 221 MPa21000 - 32100 psiAverage value: 195 MPa Grade Count:12
Charpy Impact, Notched 0.170 - 0.210 J/cm²0.809 - 0.999 ft-lb/in²Average value: 0.188 J/cm² Grade Count:4
 
Electrical PropertiesMetricEnglishComments
Electrical Resistivity 1.35e+11 - 2.68e+12 ohm-cm1.35e+11 - 2.68e+12 ohm-cmAverage value: 9.78e+11 ohm-cm Grade Count:12
Dielectric Constant 4.80 - 14.04.80 - 14.0Average value: 6.62 Grade Count:12
Dielectric Strength 7.40 - 16.7 kV/mm188 - 424 kV/inAverage value: 12.6 kV/mm Grade Count:12
Dissipation Factor 0.0370 - 0.1700.0370 - 0.170Average value: 0.0726 Grade Count:12
Arc Resistance 150 - 180 sec150 - 180 secAverage value: 165 sec Grade Count:6
Comparative Tracking Index 175 - 230 V175 - 230 VAverage value: 193 V Grade Count:12
 
Thermal PropertiesMetricEnglishComments
Maximum Service Temperature, Air 150 - 205 °C302 - 401 °FAverage value: 186 °C Grade Count:6
Deflection Temperature at 1.8 MPa (264 psi) 166 - 204 °C331 - 399 °FAverage value: 180 °C Grade Count:12
UL RTI, Electrical 150 °C302 °FAverage value: 150 °C Grade Count:6
UL RTI, Mechanical with Impact 150 °C302 °FAverage value: 150 °C Grade Count:6
UL RTI, Mechanical without Impact 150 °C302 °FAverage value: 150 °C Grade Count:6
Flammability, UL94 V-1 - 5VAV-1 - 5VAGrade Count:12

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-34731.html

免责声明: 本文 Overview of materials for Phenolic, Novolac, Heat Resistant Grade, Filled 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4