Overview of materials for Phenolic, Novolac, Mineral/Fiber Filled

Overview of materials for Phenolic, Novolac, Mineral/Fiber Filled 物性表: Overview of materials for Phenolic, Novolac, Mineral/Fiber Filled物性表及特性介绍,Overview of materials for Phenolic, Novolac, Mineral/Fiber Filled注塑参数详情,如需Overview of materials for Phenolic, Novolac, Mineral/Fiber Filled下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.46
  • 吸水率 [%]: 0.3
  • 缺口冲击强度: 0.21
  • 断裂伸长率 [%]: 72.0
  • 弯曲强度 [MPa]: 41.0
  • 弯曲模量 [MPa]: 6.90
 
Physical PropertiesMetricEnglishComments
Density 1.46 - 1.58 g/cc0.0527 - 0.0571 lb/in³Average value: 1.50 g/cc Grade Count:10
Apparent Bulk Density 0.500 - 0.680 g/cc0.0181 - 0.0246 lb/in³Average value: 0.586 g/cc Grade Count:10
Water Absorption 0.300 - 0.400 %0.300 - 0.400 %Average value: 0.360 % Grade Count:10
Linear Mold Shrinkage 0.00400 - 0.0110 cm/cm0.00400 - 0.0110 in/inAverage value: 0.00760 cm/cm Grade Count:10
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength, Ultimate 41.0 - 62.0 MPa5950 - 8990 psiAverage value: 53.6 MPa Grade Count:10
Modulus of Elasticity 9.00 - 11.0 GPa1310 - 1600 ksiAverage value: 10.1 GPa Grade Count:6
Flexural Yield Strength 72.0 - 86.0 MPa10400 - 12500 psiAverage value: 81.1 MPa Grade Count:10
Flexural Modulus 6.90 GPa1000 ksiAverage value: 6.90 GPa Grade Count:4
Compressive Yield Strength 166 - 235 MPa24100 - 34100 psiAverage value: 197 MPa Grade Count:10
Izod Impact, Notched 0.210 - 0.290 J/cm0.393 - 0.543 ft-lb/inAverage value: 0.250 J/cm Grade Count:4
 
Electrical PropertiesMetricEnglishComments
Electrical Resistivity 2.20e+10 - 1.00e+12 ohm-cm2.20e+10 - 1.00e+12 ohm-cmAverage value: 7.55e+11 ohm-cm Grade Count:8
Dielectric Constant 5.00 - 5.505.00 - 5.50Average value: 5.13 Grade Count:6
Dielectric Strength 10.8 - 14.7 kV/mm274 - 373 kV/inAverage value: 12.5 kV/mm Grade Count:10
Dissipation Factor 0.0400 - 0.05000.0400 - 0.0500Average value: 0.0483 Grade Count:6
Comparative Tracking Index 180 - 225 V180 - 225 VAverage value: 191 V Grade Count:10
 
Thermal PropertiesMetricEnglishComments
Maximum Service Temperature, Air 150 - 160 °C302 - 320 °FAverage value: 157 °C Grade Count:6
Deflection Temperature at 1.8 MPa (264 psi) 177 - 191 °C351 - 376 °FAverage value: 186 °C Grade Count:6
UL RTI, Electrical 150 °C302 °FAverage value: 150 °C Grade Count:4
UL RTI, Mechanical with Impact 150 °C302 °FAverage value: 150 °C Grade Count:4
UL RTI, Mechanical without Impact 150 °C302 °FAverage value: 150 °C Grade Count:4
Flammability, UL94 V-1 - V-0V-1 - V-0Grade Count:10

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-34754.html

免责声明: 本文 Overview of materials for Phenolic, Novolac, Mineral/Fiber Filled 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4