| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Specific Gravity | 1.75 - 2.25 g/cc | 1.75 - 2.25 g/cc | ASTM D792 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Shore A | 55 - 75 | 55 - 75 | ASTM D2240 | ||
| Tensile Strength at Break | >= 1.03 MPa | >= 150 psi | ASTM D412 | ||
| Elongation at Break | >= 100 % | >= 100 % | ASTM D412 | ||
| Compression Set | <= 40 % @Temperature 100 °C, Time 252000 sec | <= 40 % @Temperature 212 °F, Time 70.0 hour | ASTM D395 Method B | ||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 0.10 ohm-cm | 0.10 ohm-cm | without psa; CEPS-002 | ||
| Shielding Effectiveness | >= 100 dB | >= 100 dB | 500 MHz (E Field); MIL-G-83528 | ||
| >= 80 dB @Frequency 2.00e+9 Hz | >= 80 dB @Frequency 2.00e+9 Hz | CHO-TM-TP08 | |||
| >= 80 dB @Frequency 1.00e+9 Hz | >= 80 dB @Frequency 1.00e+9 Hz | CHO-TM-TP08 | |||
| >= 100 dB @Frequency 1.00e+8 Hz | >= 100 dB @Frequency 1.00e+8 Hz | CHO-TM-TP08 | |||
| >= 100 dB @Frequency 5.00e+8 Hz | >= 100 dB @Frequency 5.00e+8 Hz | CHO-TM-TP08 | |||
| Thermal Properties | Metric | English | Comments | ||
| Thermal Conductivity | 1.10 W/m-K @Pressure 2.07 MPa | 7.63 BTU-in/hr-ft²-°F @Pressure 300 psi | ASTM D5470 | ||
| Maximum Service Temperature, Air | 150 °C | 302 °F | |||
| Minimum Service Temperature, Air | -40.0 °C | -40.0 °F | Flex TR10; ASTM D1329 | ||
| Flammability, UL94 | V-0 | V-0 | |||
| Descriptive Properties | |||||
| Binder | Silicone | ||||
| Filler | Ni/C | ||||
| Heat Aging | <0.25 ohm-cm | 150°C for 48 hrs; CEPS-0002 | |||
