| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Specific Gravity | 1.65 - 2.15 g/cc | 1.65 - 2.15 g/cc | ASTM D792 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Shore A | 68 - 82 | 68 - 82 | ASTM D2240 | ||
| Tensile Strength | >= 1.38 MPa | >= 200 psi | ASTM D412 | ||
| Elongation at Break | <= 75 % | <= 75 % | ASTM D412 | ||
| Tear Strength | <= 10.5 kN/m | <= 60.0 pli | ASTM D624 | ||
| Compression Set | <= 40 % @Temperature 100 °C, Time 252000 sec | <= 40 % @Temperature 212 °F, Time 70.0 hour | ASTM D395, Method B | ||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | <= 5.0 ohm-cm | <= 5.0 ohm-cm | without pressure-sensitive adhesive; CEPS-0002 | ||
| Shielding Effectiveness | >= 85 dB @Frequency 2.00e+9 Hz | >= 85 dB @Frequency 2.00e+9 Hz | Plane Wave; Method 2, MIL-DTL-83528 Para. 4.6.12 | ||
| >= 85 dB @Frequency 1.00e+10 Hz | >= 85 dB @Frequency 1.00e+10 Hz | Plane Wave; Method 2, MIL-DTL-83528 Para. 4.6.12 | |||
| >= 90 dB @Frequency 5.00e+8 Hz | >= 90 dB @Frequency 5.00e+8 Hz | E-Field; Method 2, MIL-DTL-83528 Para. 4.6.12 | |||
| >= 95 dB @Frequency 1.00e+8 Hz | >= 95 dB @Frequency 1.00e+8 Hz | E-Field; Method 2, MIL-DTL-83528 Para. 4.6.12 | |||
| Thermal Properties | Metric | English | Comments | ||
| Thermal Conductivity | 0.600 W/m-K @Pressure 2.07 MPa | 4.16 BTU-in/hr-ft²-°F @Pressure 300 psi | ASTM D5470 | ||
| Maximum Service Temperature, Air | 100 °C | 212 °F | |||
| Minimum Service Temperature, Air | -45.0 °C | -49.0 °F | Flex TR10 | ||
| Descriptive Properties | |||||
| Binder | EPDM | ||||
| Filler | Ni/C | ||||
| Heat Aging | <10 ohm-cm | 100°C for 48hrs; CEPS-0002 | |||
