- 密度 [g/cm3]: 1.13
- 缺口冲击强度: 0.5
- 断裂伸长率 [%]: 60.0
- 弯曲强度 [MPa]: 39.0
- 弯曲模量 [MPa]: 1.40
- 热变形温度 [℃]: 99.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.13 g/cc | 0.0408 lb/in³ | ASTM D792 |
| Linear Mold Shrinkage | 0.010 - 0.012 cm/cm | 0.010 - 0.012 in/in | Bayer Test |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Shore D | 76 | 76 | ASTM D2240 |
| Tensile Strength, Ultimate | 39.0 MPa | 5660 psi | ASTM D638/D412 |
| Elongation at Break | 10 % | 10 % | ASTM D638/D412 |
| Flexural Yield Strength | 60.0 MPa | 8700 psi | ASTM D790 |
| Flexural Modulus | 1.40 GPa | 203 ksi | ASTM D790 |
| Compressive Yield Strength | 35.0 MPa | 5080 psi | ASTM D395 |
| Izod Impact, Notched | 0.500 J/cm | 0.937 ft-lb/in | ASTM D256 |
| Izod Impact, Unnotched | 3.70 J/cm | 6.93 ft-lb/in | ASTM D256 |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 2.30e+14 ohm-cm | 2.30e+14 ohm-cm | ASTM D257 |
| Surface Resistance | 3.10e+15 ohm | 3.10e+15 ohm | ASTM D257 |
| Dielectric Constant | 3.44 @Frequency 1e+6 Hz | 3.44 @Frequency 1e+6 Hz | ASTM D150 |
| Dielectric Strength | 11.5 kV/mm | 292 kV/in | ASTM D149 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 101 µm/m-°C @Temperature 20.0 °C | 56.1 µin/in-°F @Temperature 68.0 °F | ASTM D696 |
| Deflection Temperature at 0.46 MPa (66 psi) | 99.0 °C | 210 °F | ASTM D648 |
| Flammability, UL94 | V-0 @Thickness 6.35 mm | V-0 @Thickness 0.250 in | |
| V-0 @Thickness 6.35 mm | V-0 @Thickness 0.250 in | ||