- 吸水率 [%]: 0.21
- 拉伸强度 [MPa]: 0.434
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Specific Gravity | 0.970 g/cc | 0.970 g/cc | Resin; ASTM D1505 | ||
| 1.00 g/cc | 1.00 g/cc | Mixed; ASTM D1505 | |||
| 1.02 g/cc | 1.02 g/cc | Hardener; ASTM D1505 | |||
| Water Absorption | 0.21 % @Temperature 25.0 °C, Time 86400 sec | 0.21 % @Temperature 77.0 °F, Time 24.0 hour | ASTM D570 | ||
| Loss On Ignition | 0.57 % @Temperature 125 °C, Time 605000 sec | 0.57 % @Temperature 257 °F, Time 168 hour | |||
| Viscosity | 90 - 130 cP @Temperature 25.0 °C | 90 - 130 cP @Temperature 77.0 °F | Hardener; STM 1 | ||
| 400 - 500 cP @Temperature 25.0 °C | 400 - 500 cP @Temperature 77.0 °F | Mixed; STM 1 | |||
| 900 - 1300 cP @Temperature 25.0 °C | 900 - 1300 cP @Temperature 77.0 °F | Resin; STM 1 | |||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Shore A | 25 - 35 | 25 - 35 | ASTM D2240 | ||
| Tensile Strength, Yield | 0.434 MPa | 63.0 psi | ASTM D638 | ||
| Elongation at Yield | 68 % | 68 % | ASTM D638 | ||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 2.40e+11 ohm-cm | 2.40e+11 ohm-cm | ASTM D257 | ||
| Dielectric Constant | 3.96 @Frequency 1.00e+6 Hz, Temperature 25.0 °C | 3.96 @Frequency 1.00e+6 Hz, Temperature 77.0 °F | ASTM D150 | ||
| Dielectric Strength | >= 19.7 kV/mm | >= 500 kV/in | ASTM D149 | ||
| Dissipation Factor | 0.11 @Frequency 1.00e+6 Hz, Temperature 25.0 °C | 0.11 @Frequency 1.00e+6 Hz, Temperature 77.0 °F | ASTM D150 | ||
| Thermal Properties | Metric | English | Comments | ||
| Maximum Service Temperature, Air | 130 °C | 266 °F | |||
| Glass Transition Temp, Tg | -46.0 °C | -50.8 °F | DMTA | ||
| Processing Properties | Metric | English | Comments | ||
| Cure Time | 120 - 240 min @Temperature 66.0 °C | 2.00 - 4.00 hour @Temperature 151 °F | |||
| 1440 min @Temperature 25.0 °C | 24.0 hour @Temperature 77.0 °F | ||||
| Pot Life | 20 min @Temperature 25.0 °C | 20 min @Temperature 77.0 °F | Based on 100 gram mass | ||
| Gel Time | 40.0 - 50.0 min @Temperature 25.0 °C | 40.0 - 50.0 min @Temperature 77.0 °F | 100 gram mass | ||
| Shelf Life | 6.00 Month @Temperature 25.0 °C | 6.00 Month @Temperature 77.0 °F | |||
| Descriptive Properties | |||||
| Appearance | Black | Resin | |||
| Black | Mixed | ||||
| Light Amber | Hardener | ||||
| Mix Ratio | 1:1 | by volume | |||
| 100:104 | by weight | ||||