- 缺口冲击强度: 0.785
- 弯曲模量 [MPa]: 7.7499
- 热变形温度 [℃]: 215.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.52 g/cc | 1.52 g/cc | ASTM D792 |
| Linear Mold Shrinkage | 0.0030 cm/cm | 0.0030 in/in | |
| Linear Mold Shrinkage, Transverse | 0.0090 cm/cm | 0.0090 in/in | |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength | 117.72 MPa | 17074 psi | ASTM D638 |
| Elongation at Break | 3.0 % | 3.0 % | ASTM D638 |
| Flexural Strength | 181.49 MPa | 26323 psi | ASTM D790 |
| Flexural Modulus | 7.7499 GPa | 1124.0 ksi | ASTM D790 |
| Izod Impact, Notched | 0.785 J/cm | 1.47 ft-lb/in | ASTM D256 |
| Thermal Properties | Metric | English | Comments |
| Deflection Temperature at 0.46 MPa (66 psi) | 215 °C | 419 °F | ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 210 °C | 410 °F | ASTM D648 |
| Flammability, UL94 | HB | HB | |
| Processing Properties | Metric | English | Comments |
| Melt Temperature | 230 - 270 °C | 446 - 518 °F | |
| Mold Temperature | 60.0 - 80.0 °C | 140 - 176 °F | |