塑胶原料之家
  1. 首页
  2. 英文物性
  3. PET
  4. DuPont Performance Polymers Rynite® FR530 NC010 PET

DuPont Performance Polymers Rynite® FR530 NC010 PET

DuPont Performance Polymers Rynite® FR530 NC010 PET 物性表: DuPont Performance Polymers Rynite® FR530 NC010 PET物性表及特性介绍,DuPont Performance Polymers Rynite® FR530 NC010 PET注塑参数详情,如需DuPont Performance Polymers Rynite® FR530 NC010 PET下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.68
  • 吸水率 [%]: 0.05
  • 成型收缩率 [%]: 0.0016
  • 缺口冲击强度: 0.8
  • 弯曲模量 [MPa]: 2.65
  • 硬度: 120.0
  • 热变形温度 [℃]: 243.0
 
Physical PropertiesMetricEnglishComments
Specific Gravity 1.67 g/cc1.67 g/ccASTM D792
Density 1.68 g/cc0.0607 lb/in³ISO 1183
Filler Content 30 %30 %
Water Absorption 0.050 %
@Temperature 23.0 °C		0.050 %
@Temperature 73.4 °F		50%RH,23°C,24h; ASTM D570
 0.15 %
@Thickness 1.00 mm,
Temperature 23.0 °C		0.15 %
@Thickness 0.0394 in,
Temperature 73.4 °F		Equilibrium 50%RH; ISO 62, Similar to
 0.75 %
@Thickness 1.00 mm,
Temperature 23.0 °C		0.75 %
@Thickness 0.0394 in,
Temperature 73.4 °F		Saturation, immersed; ISO 62, Similar to
Linear Mold Shrinkage  0.0016 cm/cm
@Thickness 1.57 mm		0.0016 in/in
@Thickness 0.0618 in		Flow
 0.0025 cm/cm
@Thickness 3.20 mm		0.0025 in/in
@Thickness 0.126 in		Flow
 0.0068 cm/cm
@Thickness 1.57 mm		0.0068 in/in
@Thickness 0.0618 in		Transverse
 0.0075 cm/cm
@Thickness 3.20 mm		0.0075 in/in
@Thickness 0.126 in		Transverse
Linear Mold Shrinkage, Flow 0.0020 cm/cm
@Thickness 2.00 mm		0.0020 in/in
@Thickness 0.0787 in		Parallel; ISO 294-4
Linear Mold Shrinkage, Transverse 0.0080 cm/cm
@Thickness 2.00 mm		0.0080 in/in
@Thickness 0.0787 in		Normal; ISO 294-4
Melt Index of Compound 6.0 g/10 min
@Load 2.16 kg,
Temperature 280 °C		6.0 g/10 min
@Load 4.76 lb,
Temperature 536 °F		cm3/10 min; ISO 1133
 
Mechanical PropertiesMetricEnglishComments
Hardness, Rockwell M 9595ASTM D785
Hardness, Rockwell R 120120ASTM D785
Tensile Strength at Break 135 MPa
@Temperature 23.0 °C		19600 psi
@Temperature 73.4 °F		ISO 527
Tensile Strength  44.8 MPa
@Temperature 150 °C		6500 psi
@Temperature 302 °F		ASTM D638
 72.4 MPa
@Temperature 90.0 °C		10500 psi
@Temperature 194 °F		ASTM D638
 138 MPa
@Temperature 23.0 °C		20000 psi
@Temperature 73.4 °F		ASTM D638
 193 MPa
@Temperature -40.0 °C		28000 psi
@Temperature -40.0 °F		ASTM D638
Tensile Stress  16.0 MPa
@Strain 0.450 %,
Temperature 150 °C		2320 psi
@Strain 0.450 %,
Temperature 302 °F		ISO 527
 20.1 MPa
@Strain 0.380 %,
Temperature 90.0 °C		2920 psi
@Strain 0.380 %,
Temperature 194 °F		ISO 527
 21.1 MPa
@Strain 0.210 %,
Temperature 40.0 °C		3060 psi
@Strain 0.210 %,
Temperature 104 °F		ISO 527
 21.2 MPa
@Strain 0.500 %,
Temperature 120 °C		3070 psi
@Strain 0.500 %,
Temperature 248 °F		ISO 527
 22.0 MPa
@Strain 0.180 %,
Temperature 0.000 °C		3190 psi
@Strain 0.180 %,
Temperature 32.0 °F		ISO 527
 22.7 MPa
@Strain 0.200 %,
Temperature 23.0 °C		3290 psi
@Strain 0.200 %,
Temperature 73.4 °F		ISO 527
 24.3 MPa
@Strain 0.180 %,
Temperature -40.0 °C		3520 psi
@Strain 0.180 %,
Temperature -40.0 °F		ISO 527
 28.0 MPa
@Strain 0.900 %,
Temperature 150 °C		4060 psi
@Strain 0.900 %,
Temperature 302 °F		ISO 527
 29.8 MPa
@Strain 0.390 %,
Temperature 60.0 °C		4320 psi
@Strain 0.390 %,
Temperature 140 °F		ISO 527
 34.2 MPa
@Strain 0.980 %,
Temperature 120 °C		4960 psi
@Strain 0.980 %,
Temperature 248 °F		ISO 527
 36.4 MPa
@Strain 0.790 %,
Temperature 90.0 °C		5280 psi
@Strain 0.790 %,
Temperature 194 °F		ISO 527
 37.0 MPa
@Strain 1.35 %,
Temperature 150 °C		5370 psi
@Strain 1.35 %,
Temperature 302 °F		ISO 527
 41.0 MPa
@Strain 0.430 %,
Temperature 40.0 °C		5950 psi
@Strain 0.430 %,
Temperature 104 °F		ISO 527
 42.0 MPa
@Strain 1.80 %,
Temperature 150 °C		6090 psi
@Strain 1.80 %,
Temperature 302 °F		ISO 527
 42.1 MPa
@Strain 0.390 %,
Temperature 23.0 °C		6110 psi
@Strain 0.390 %,
Temperature 73.4 °F		ISO 527
 42.7 MPa
@Strain 1.46 %,
Temperature 120 °C		6190 psi
@Strain 1.46 %,
Temperature 248 °F		ISO 527
 43.1 MPa
@Strain 0.370 %,
Temperature 0.000 °C		6250 psi
@Strain 0.370 %,
Temperature 32.0 °F		ISO 527
 45.4 MPa
@Strain 0.350 %,
Temperature -40.0 °C		6580 psi
@Strain 0.350 %,
Temperature -40.0 °F		ISO 527
 45.9 MPa
@Strain 0.650 %,
Temperature 60.0 °C		6660 psi
@Strain 0.650 %,
Temperature 140 °F		ISO 527
 46.0 MPa
@Strain 2.26 %,
Temperature 150 °C		6670 psi
@Strain 2.26 %,
Temperature 302 °F		ISO 527
 46.4 MPa
@Strain 1.14 %,
Temperature 90.0 °C		6730 psi
@Strain 1.14 %,
Temperature 194 °F		ISO 527
 48.0 MPa
@Strain 2.71 %,
Temperature 150 °C		6960 psi
@Strain 2.71 %,
Temperature 302 °F		ISO 527
 48.5 MPa
@Strain 1.94 %,
Temperature 120 °C		7030 psi
@Strain 1.94 %,
Temperature 248 °F		ISO 527
 50.0 MPa
@Strain 3.16 %,
Temperature 150 °C		7250 psi
@Strain 3.16 %,
Temperature 302 °F		ISO 527
 51.0 MPa
@Strain 3.61 %,
Temperature 150 °C		7400 psi
@Strain 3.61 %,
Temperature 302 °F		ISO 527
 52.0 MPa
@Strain 4.06 %,
Temperature 150 °C		7540 psi
@Strain 4.06 %,
Temperature 302 °F		ISO 527
 52.7 MPa
@Strain 2.42 %,
Temperature 120 °C		7640 psi
@Strain 2.42 %,
Temperature 248 °F		ISO 527
 53.0 MPa
@Strain 4.51 %,
Temperature 150 °C		7690 psi
@Strain 4.51 %,
Temperature 302 °F		ISO 527
 54.1 MPa
@Strain 1.50 %,
Temperature 90.0 °C		7850 psi
@Strain 1.50 %,
Temperature 194 °F		ISO 527
 55.7 MPa
@Strain 2.89 %,
Temperature 120 °C		8080 psi
@Strain 2.89 %,
Temperature 248 °F		ISO 527
 57.2 MPa
@Strain 0.630 %,
Temperature 40.0 °C		8300 psi
@Strain 0.630 %,
Temperature 104 °F		ISO 527
 57.8 MPa
@Strain 3.37 %,
Temperature 120 °C		8380 psi
@Strain 3.37 %,
Temperature 248 °F		ISO 527
 59.3 MPa
@Strain 3.85 %,
Temperature 120 °C		8600 psi
@Strain 3.85 %,
Temperature 248 °F		ISO 527
 59.7 MPa
@Strain 0.900 %,
Temperature 60.0 °C		8660 psi
@Strain 0.900 %,
Temperature 140 °F		ISO 527
 59.7 MPa
@Strain 4.81 %,
Temperature 120 °C		8660 psi
@Strain 4.81 %,
Temperature 248 °F		ISO 527
 60.1 MPa
@Strain 0.580 %,
Temperature 23.0 °C		8720 psi
@Strain 0.580 %,
Temperature 73.4 °F		ISO 527
 60.3 MPa
@Strain 4.33 %,
Temperature 120 °C		8750 psi
@Strain 4.33 %,
Temperature 248 °F		ISO 527
 60.6 MPa
@Strain 1.90 %,
Temperature 90.0 °C		8790 psi
@Strain 1.90 %,
Temperature 194 °F		ISO 527
 62.0 MPa
@Strain 0.550 %,
Temperature 0.000 °C		8990 psi
@Strain 0.550 %,
Temperature 32.0 °F		ISO 527
 64.5 MPa
@Strain 2.26 %,
Temperature 90.0 °C		9350 psi
@Strain 2.26 %,
Temperature 194 °F		ISO 527
 66.5 MPa
@Strain 0.530 %,
Temperature -40.0 °C		9650 psi
@Strain 0.530 %,
Temperature -40.0 °F		ISO 527
 67.3 MPa
@Strain 2.61 %,
Temperature 90.0 °C		9760 psi
@Strain 2.61 %,
Temperature 194 °F		ISO 527
 69.1 MPa
@Strain 2.96 %,
Temperature 90.0 °C		10000 psi
@Strain 2.96 %,
Temperature 194 °F		ISO 527
 70.4 MPa
@Strain 3.37 %,
Temperature 90.0 °C		10200 psi
@Strain 3.37 %,
Temperature 194 °F		ISO 527
 70.9 MPa
@Strain 3.72 %,
Temperature 90.0 °C		10300 psi
@Strain 3.72 %,
Temperature 194 °F		ISO 527
 71.1 MPa
@Strain 1.16 %,
Temperature 60.0 °C		10300 psi
@Strain 1.16 %,
Temperature 140 °F		ISO 527
 72.3 MPa
@Strain 0.840 %,
Temperature 40.0 °C		10500 psi
@Strain 0.840 %,
Temperature 104 °F		ISO 527
 76.3 MPa
@Strain 0.770 %,
Temperature 23.0 °C		11100 psi
@Strain 0.770 %,
Temperature 73.4 °F		ISO 527
 79.4 MPa
@Strain 1.42 %,
Temperature 60.0 °C		11500 psi
@Strain 1.42 %,
Temperature 140 °F		ISO 527
 81.0 MPa
@Strain 0.740 %,
Temperature 0.000 °C		11700 psi
@Strain 0.740 %,
Temperature 32.0 °F		ISO 527
 84.9 MPa
@Strain 0.700 %,
Temperature -40.0 °C		12300 psi
@Strain 0.700 %,
Temperature -40.0 °F		ISO 527
 85.3 MPa
@Strain 1.05 %,
Temperature 40.0 °C		12400 psi
@Strain 1.05 %,
Temperature 104 °F		ISO 527
 86.4 MPa
@Strain 1.68 %,
Temperature 60.0 °C		12500 psi
@Strain 1.68 %,
Temperature 140 °F		ISO 527
 90.5 MPa
@Strain 0.960 %,
Temperature 23.0 °C		13100 psi
@Strain 0.960 %,
Temperature 73.4 °F		ISO 527
 91.7 MPa
@Strain 1.94 %,
Temperature 60.0 °C		13300 psi
@Strain 1.94 %,
Temperature 140 °F		ISO 527
 95.4 MPa
@Strain 2.20 %,
Temperature 60.0 °C		13800 psi
@Strain 2.20 %,
Temperature 140 °F		ISO 527
 96.4 MPa
@Strain 1.27 %,
Temperature 40.0 °C		14000 psi
@Strain 1.27 %,
Temperature 104 °F		ISO 527
 96.5 MPa
@Strain 0.920 %,
Temperature 0.000 °C		14000 psi
@Strain 0.920 %,
Temperature 32.0 °F		ISO 527
 99.0 MPa
@Strain 2.46 %,
Temperature 60.0 °C		14400 psi
@Strain 2.46 %,
Temperature 140 °F		ISO 527
 102 MPa
@Strain 2.71 %,
Temperature 60.0 °C		14800 psi
@Strain 2.71 %,
Temperature 140 °F		ISO 527
 103 MPa
@Strain 1.15 %,
Temperature 23.0 °C		14900 psi
@Strain 1.15 %,
Temperature 73.4 °F		ISO 527
 104 MPa
@Strain 0.880 %,
Temperature -40.0 °C		15100 psi
@Strain 0.880 %,
Temperature -40.0 °F		ISO 527
 105 MPa
@Strain 1.47 %,
Temperature 40.0 °C		15200 psi
@Strain 1.47 %,
Temperature 104 °F		ISO 527
 111 MPa
@Strain 1.68 %,
Temperature 40.0 °C		16100 psi
@Strain 1.68 %,
Temperature 104 °F		ISO 527
 111 MPa
@Strain 1.11 %,
Temperature 0.000 °C		16100 psi
@Strain 1.11 %,
Temperature 32.0 °F		ISO 527
 113 MPa
@Strain 1.34 %,
Temperature 23.0 °C		16400 psi
@Strain 1.34 %,
Temperature 73.4 °F		ISO 527
 115 MPa
@Strain 1.89 %,
Temperature 40.0 °C		16700 psi
@Strain 1.89 %,
Temperature 104 °F		ISO 527
 120 MPa
@Strain 2.12 %,
Temperature 40.0 °C		17400 psi
@Strain 2.12 %,
Temperature 104 °F		ISO 527
 120 MPa
@Strain 1.05 %,
Temperature -40.0 °C		17400 psi
@Strain 1.05 %,
Temperature -40.0 °F		ISO 527
 121 MPa
@Strain 1.53 %,
Temperature 23.0 °C		17500 psi
@Strain 1.53 %,
Temperature 73.4 °F		ISO 527
 124 MPa
@Strain 1.29 %,
Temperature 0.000 °C		18000 psi
@Strain 1.29 %,
Temperature 32.0 °F		ISO 527
 128 MPa
@Strain 1.72 %,
Temperature 23.0 °C		18600 psi
@Strain 1.72 %,
Temperature 73.4 °F		ISO 527
 134 MPa
@Strain 1.90 %,
Temperature 23.0 °C		19400 psi
@Strain 1.90 %,
Temperature 73.4 °F		ISO 527
 136 MPa
@Strain 1.48 %,
Temperature 0.000 °C		19700 psi
@Strain 1.48 %,
Temperature 32.0 °F		ISO 527
 137 MPa
@Strain 1.23 %,
Temperature -40.0 °C		19900 psi
@Strain 1.23 %,
Temperature -40.0 °F		ISO 527
 145 MPa
@Strain 1.66 %,
Temperature 0.000 °C		21000 psi
@Strain 1.66 %,
Temperature 32.0 °F		ISO 527
 151 MPa
@Strain 1.40 %,
Temperature -40.0 °C		21900 psi
@Strain 1.40 %,
Temperature -40.0 °F		ISO 527
 153 MPa
@Strain 1.85 %,
Temperature 0.000 °C		22200 psi
@Strain 1.85 %,
Temperature 32.0 °F		ISO 527
 165 MPa
@Strain 1.58 %,
Temperature -40.0 °C		23900 psi
@Strain 1.58 %,
Temperature -40.0 °F		ISO 527
 176 MPa
@Strain 1.75 %,
Temperature -40.0 °C		25500 psi
@Strain 1.75 %,
Temperature -40.0 °F		ISO 527
Elongation at Break  1.9 %
@Temperature -40.0 °C		1.9 %
@Temperature -40.0 °F		ASTM D638
 2.0 %
@Temperature 23.0 °C		2.0 %
@Temperature 73.4 °F		ISO 527
 2.1 %
@Temperature 23.0 °C		2.1 %
@Temperature 73.4 °F		ASTM D638
 3.5 %
@Temperature 90.0 °C		3.5 %
@Temperature 194 °F		ASTM D638
 4.0 %
@Temperature 150 °C		4.0 %
@Temperature 302 °F		ASTM D638
Tensile Modulus  3.89 GPa
@Temperature 150 °C		564 ksi
@Temperature 302 °F		ASTM D638
 5.58 GPa
@Temperature 90.0 °C		809 ksi
@Temperature 194 °F		ASTM D638
 11.0 GPa
@Temperature 23.0 °C		1600 ksi
@Temperature 73.4 °F		ASTM D638
 11.5 GPa
@Temperature 23.0 °C		1670 ksi
@Temperature 73.4 °F		ISO 527
 12.5 GPa
@Temperature -40.0 °C		1810 ksi
@Temperature -40.0 °F		ASTM D638
Flexural Strength  69.0 MPa
@Temperature 150 °C		10000 psi
@Temperature 302 °F		ASTM D790
 107 MPa
@Temperature 90.0 °C		15500 psi
@Temperature 194 °F		ASTM D790
 200 MPa
@Temperature 23.0 °C		29000 psi
@Temperature 73.4 °F		ASTM D790
 262 MPa
@Temperature -40.0 °C		38000 psi
@Temperature -40.0 °F		ASTM D790
Flexural Modulus  2.65 GPa
@Temperature 150 °C		384 ksi
@Temperature 302 °F		ASTM D790
 4.65 GPa
@Temperature 90.0 °C		674 ksi
@Temperature 194 °F		ASTM D790
 10.3 GPa
@Temperature 23.0 °C		1490 ksi
@Temperature 73.4 °F		ASTM D790
 10.5 GPa
@Temperature 23.0 °C		1520 ksi
@Temperature 73.4 °F		ISO 178
 11.0 GPa
@Temperature -40.0 °C		1600 ksi
@Temperature -40.0 °F		ASTM D790
Compressive Strength 200 MPa
@Temperature 23.0 °C		29000 psi
@Temperature 73.4 °F		ASTM D695
Shear Strength 60.0 MPa
@Temperature 23.0 °C		8700 psi
@Temperature 73.4 °F		ASTM D732
Izod Impact, Notched  0.800 J/cm
@Temperature -40.0 °C		1.50 ft-lb/in
@Temperature -40.0 °F		ASTM D256
 0.910 J/cm
@Temperature 23.0 °C		1.70 ft-lb/in
@Temperature 73.4 °F		ASTM D256
Izod Impact, Unnotched  5.35 J/cm
@Temperature -40.0 °C		10.0 ft-lb/in
@Temperature -40.0 °F		ASTM D4812
 5.85 J/cm
@Temperature 23.0 °C		11.0 ft-lb/in
@Temperature 73.4 °F		ASTM D4812
Izod Impact, Notched (ISO)  8.00 kJ/m²
@Temperature -40.0 °C		3.81 ft-lb/in²
@Temperature -40.0 °F		ISO 180/1A
 8.00 kJ/m²
@Temperature -30.0 °C		3.81 ft-lb/in²
@Temperature -22.0 °F		ISO 180/1A
 9.00 kJ/m²
@Temperature 23.0 °C		4.28 ft-lb/in²
@Temperature 73.4 °F		ISO 180/1A
Charpy Impact Unnotched  4.00 J/cm²
@Temperature -30.0 °C		19.0 ft-lb/in²
@Temperature -22.0 °F		ISO 179/1eU
 4.00 J/cm²
@Temperature 23.0 °C		19.0 ft-lb/in²
@Temperature 73.4 °F		ISO 179/1eU
Charpy Impact, Notched  0.900 J/cm²
@Temperature -30.0 °C		4.28 ft-lb/in²
@Temperature -22.0 °F		ISO 179/1eA
 1.00 J/cm²
@Temperature 23.0 °C		4.76 ft-lb/in²
@Temperature 73.4 °F		ISO 179/1eA
Tensile Creep Modulus, 1 hour 11200 MPa
@Temperature 23.0 °C		1.62e+6 psi
@Temperature 73.4 °F		ISO 899
Tensile Creep Modulus, 1000 hours 9700 MPa
@Temperature 23.0 °C		1.41e+6 psi
@Temperature 73.4 °F		ISO 899
 
Electrical PropertiesMetricEnglishComments
Volume Resistivity  1.00e+15 ohm-cm
@Temperature 23.0 °C		1.00e+15 ohm-cm
@Temperature 73.4 °F		ASTM D257
 1.00e+15 ohm-cm
@Temperature 23.0 °C		1.00e+15 ohm-cm
@Temperature 73.4 °F		IEC 60093
Surface Resistance  1.00e+14 ohm
@Temperature 23.0 °C		1.00e+14 ohm
@Temperature 73.4 °F		ASTM D257
 1.00e+14 ohm
@Temperature 23.0 °C		1.00e+14 ohm
@Temperature 73.4 °F		IEC 60093
Dielectric Constant  3.7
@Frequency 1.00e+6 Hz,
Temperature 23.0 °C		3.7
@Frequency 1.00e+6 Hz,
Temperature 73.4 °F		ASTM D150
 3.8
@Frequency 1000 Hz,
Temperature 23.0 °C		3.8
@Frequency 1000 Hz,
Temperature 73.4 °F		ASTM D150
 4.7
@Frequency 1.00e+6 Hz,
Temperature 23.0 °C		4.7
@Frequency 1.00e+6 Hz,
Temperature 73.4 °F		IEC 60250
 4.8
@Frequency 100 Hz,
Temperature 23.0 °C		4.8
@Frequency 100 Hz,
Temperature 73.4 °F		IEC 60250
Dielectric Strength  9.00 kV/mm
@Thickness 3.20 mm,
Temperature 150 °C		229 kV/in
@Thickness 0.126 in,
Temperature 302 °F		500 V/s, in oil; Short Time; ASTM D149
 13.0 kV/mm
@Thickness 1.60 mm,
Temperature 150 °C		330 kV/in
@Thickness 0.0630 in,
Temperature 302 °F		500 V/s, in oil; Short Time; ASTM D149
 18.0 kV/mm
@Thickness 3.20 mm,
Temperature 23.0 °C		457 kV/in
@Thickness 0.126 in,
Temperature 73.4 °F		500 V/s, in oil; Short Time; ASTM D149
 18.0 kV/mm
@Thickness 3.20 mm,
Temperature 95.0 °C		457 kV/in
@Thickness 0.126 in,
Temperature 203 °F		500 V/s, in oil; Short Time; ASTM D149
 23.5 kV/mm
@Thickness 1.60 mm,
Temperature 95.0 °C		597 kV/in
@Thickness 0.0630 in,
Temperature 203 °F		500 V/s, in oil; Short Time; ASTM D149
 25.0 kV/mm
@Thickness 1.60 mm,
Temperature 23.0 °C		635 kV/in
@Thickness 0.0630 in,
Temperature 73.4 °F		500 V/s, in oil; Short Time; ASTM D149
 33.0 kV/mm
@Thickness 1.00 mm,
Temperature 23.0 °C		838 kV/in
@Thickness 0.0394 in,
Temperature 73.4 °F		IEC 60243-1
Dissipation Factor  0.0070
@Frequency 100 Hz,
Temperature 23.0 °C		0.0070
@Frequency 100 Hz,
Temperature 73.4 °F		IEC 60250
 0.010
@Frequency 1.00e+6 Hz,
Temperature 23.0 °C		0.010
@Frequency 1.00e+6 Hz,
Temperature 73.4 °F		IEC 60250
 0.011
@Frequency 1000 Hz,
Temperature 23.0 °C		0.011
@Frequency 1000 Hz,
Temperature 73.4 °F		ASTM D150
 0.018
@Frequency 1.00e+6 Hz,
Temperature 23.0 °C		0.018
@Frequency 1.00e+6 Hz,
Temperature 73.4 °F		ASTM D150
Comparative Tracking Index  225 V
@Temperature 23.0 °C		225 V
@Temperature 73.4 °F		IEC 60112
 250 V
@Temperature 23.0 °C		250 V
@Temperature 73.4 °F		UL 746A
 250 - 400 V
@Temperature 23.0 °C		250 - 400 V
@Temperature 73.4 °F		UL 746A
 
Thermal PropertiesMetricEnglishComments
CTE, linear, Parallel to Flow  500 µm/m-°C
@Temperature -40.0 - 23.0 °C		278 µin/in-°F
@Temperature -40.0 - 73.4 °F		ASTM E 831
 500 µm/m-°C
@Temperature 23.0 - 55.0 °C		278 µin/in-°F
@Temperature 73.4 - 131 °F		ASTM E 831
 500 µm/m-°C
@Temperature 55.0 - 160 °C		278 µin/in-°F
@Temperature 131 - 320 °F		ASTM E 831
 500 µm/m-°C
@Temperature -40.0 - 23.0 °C		278 µin/in-°F
@Temperature -40.0 - 73.4 °F		ISO 11359-1/-2
 500 µm/m-°C
@Temperature 23.0 - 55.0 °C		278 µin/in-°F
@Temperature 73.4 - 131 °F		ISO 11359-1/-2
 500 µm/m-°C
@Temperature 55.0 - 160 °C		278 µin/in-°F
@Temperature 131 - 320 °F		ISO 11359-1/-2
CTE, linear, Transverse to Flow  68.0 µm/m-°C
@Temperature -40.0 - 23.0 °C		37.8 µin/in-°F
@Temperature -40.0 - 73.4 °F		ASTM E 831
 68.0 µm/m-°C
@Temperature -40.0 - 23.0 °C		37.8 µin/in-°F
@Temperature -40.0 - 73.4 °F		ISO 11359-1/-2
 92.0 µm/m-°C
@Temperature 23.0 - 55.0 °C		51.1 µin/in-°F
@Temperature 73.4 - 131 °F		ASTM E 831
 92.0 µm/m-°C
@Temperature 23.0 - 55.0 °C		51.1 µin/in-°F
@Temperature 73.4 - 131 °F		ISO 11359-1/-2
 98.0 µm/m-°C
@Temperature 55.0 - 160 °C		54.4 µin/in-°F
@Temperature 131 - 320 °F		ASTM E 831
 98.0 µm/m-°C
@Temperature 55.0 - 160 °C		54.4 µin/in-°F
@Temperature 131 - 320 °F		ISO 11359-1/-2
Melting Point 254 °C489 °FASTM D3418
Deflection Temperature at 0.46 MPa (66 psi) 243 °C469 °FISO 75-1/-2
 246 °C475 °FASTM D648
Deflection Temperature at 1.8 MPa (264 psi) 224 °C435 °FASTM D648
 225 °C437 °FISO 75-1/-2
UL RTI, Electrical  155 °C
@Thickness 2.00 mm		311 °F
@Thickness 0.0787 in		UL 746B
 155 °C
@Thickness 0.350 mm		311 °F
@Thickness 0.0138 in		UL 746B
 155 °C
@Thickness 0.750 mm		311 °F
@Thickness 0.0295 in		UL 746B
 155 °C
@Thickness 3.00 mm		311 °F
@Thickness 0.118 in		UL 746B
 155 °C
@Thickness 0.900 mm		311 °F
@Thickness 0.0354 in		UL 746B
 155 °C
@Thickness 1.50 mm		311 °F
@Thickness 0.0591 in		UL 746B
UL RTI, Mechanical with Impact  155 °C
@Thickness 0.750 mm		311 °F
@Thickness 0.0295 in		UL 746B
 155 °C
@Thickness 0.900 mm		311 °F
@Thickness 0.0354 in		UL 746B
 155 °C
@Thickness 1.50 mm		311 °F
@Thickness 0.0591 in		UL 746B
 155 °C
@Thickness 2.00 mm		311 °F
@Thickness 0.0787 in		UL 746B
 155 °C
@Thickness 3.00 mm		311 °F
@Thickness 0.118 in		UL 746B
UL RTI, Mechanical without Impact  155 °C
@Thickness 1.50 mm		311 °F
@Thickness 0.0591 in		UL 746B
 155 °C
@Thickness 2.00 mm		311 °F
@Thickness 0.0787 in		UL 746B
 155 °C
@Thickness 0.900 mm		311 °F
@Thickness 0.0354 in		UL 746B
 155 °C
@Thickness 0.750 mm		311 °F
@Thickness 0.0295 in		UL 746B
 155 °C
@Thickness 3.00 mm		311 °F
@Thickness 0.118 in		UL 746B
Flammability, UL94  V-0
@Thickness 3.00 mm		V-0
@Thickness 0.118 in		UL94
 V-0
@Thickness 2.00 mm		V-0
@Thickness 0.0787 in		UL94
 V-0
@Thickness 1.50 mm		V-0
@Thickness 0.0591 in		UL94
 V-0
@Thickness 0.900 mm		V-0
@Thickness 0.0354 in		UL94
 V-0
@Thickness 0.750 mm		V-0
@Thickness 0.0295 in		UL94
 V-0
@Thickness 0.350 mm		V-0
@Thickness 0.0138 in		UL94
 V-0
@Thickness 3.00 mm		V-0
@Thickness 0.118 in		IEC 60695-11-10
 V-0
@Thickness 2.00 mm		V-0
@Thickness 0.0787 in		IEC 60695-11-10
 V-0
@Thickness 1.50 mm		V-0
@Thickness 0.0591 in		IEC 60695-11-10
 V-0
@Thickness 0.900 mm		V-0
@Thickness 0.0354 in		IEC 60695-11-10
 V-0
@Thickness 0.750 mm		V-0
@Thickness 0.0295 in		IEC 60695-11-10
 V-0
@Thickness 0.350 mm		V-0
@Thickness 0.0138 in		IEC 60695-11-10
 5VA
@Thickness 1.50 mm		5VA
@Thickness 0.0591 in		UL94
 5VA
@Thickness 0.900 mm		5VA
@Thickness 0.0354 in		IEC 60695-11-20
 5VA
@Thickness 3.00 mm		5VA
@Thickness 0.118 in		IEC 60695-11-10
 5VA
@Thickness 2.00 mm		5VA
@Thickness 0.0787 in		IEC 60695-11-10
 5VA
@Thickness 1.50 mm		5VA
@Thickness 0.0591 in		IEC 60695-11-10
 5VA
@Thickness 3.00 mm		5VA
@Thickness 0.118 in		UL94
 5VA
@Thickness 2.00 mm		5VA
@Thickness 0.0787 in		UL94
Oxygen Index 33 %33 %ASTM D2863
 33 %33 %ISO 4589-1/-2
Glow Wire Test  800 °C
@Thickness 0.750 mm		1470 °F
@Thickness 0.0295 in		Ignition; IEC 60695-2-13
 800 °C
@Thickness 0.900 mm		1470 °F
@Thickness 0.0354 in		Ignition; IEC 60695-2-13
 800 °C
@Thickness 1.50 mm		1470 °F
@Thickness 0.0591 in		Ignition; IEC 60695-2-13
 960 °C
@Thickness 2.00 mm		1760 °F
@Thickness 0.0787 in		IEC 60695-2-12
 960 °C
@Thickness 1.50 mm		1760 °F
@Thickness 0.0591 in		IEC 60695-2-12
 960 °C
@Thickness 3.00 mm		1760 °F
@Thickness 0.118 in		IEC 60695-2-12
 960 °C
@Thickness 0.750 mm		1760 °F
@Thickness 0.0295 in		IEC 60695-2-12
 960 °C
@Thickness 0.900 mm		1760 °F
@Thickness 0.0354 in		IEC 60695-2-12
 985 °C
@Thickness 2.00 mm		1810 °F
@Thickness 0.0787 in		Ignition; IEC 60695-2-13
 985 °C
@Thickness 3.00 mm		1810 °F
@Thickness 0.118 in		Ignition; IEC 60695-2-13
 
Processing PropertiesMetricEnglishComments
Melt Temperature 252 °C486 °F10°C/min; ISO 11357-1/-3
 280 °C536 °FOptimum
 270 - 290 °C518 - 554 °F
Mold Temperature 90.0 - 110 °C194 - 230 °F
 110 °C230 °Foptimum
Drying Temperature 120 °C248 °F
Dry Time 4.00 hour4.00 hour
Moisture Content <= 0.020 %<= 0.020 %
 
Descriptive Properties
AdditiveFlame Retardant
AppearanceNatural Color
Contains Flame RetardantYes
Drying RecommendedYes
FeaturesDimensional Stability, Good
 Electrical Properties, Good
 Flame Retardant
 Stiffness, Good
 Strength, Good
 Thermal Aging Resistance, Good
FillerGlass fiber reinforcement
FormsPellets
GenericPET
Heat StabilizedYes
Material StatusCurrent
Part Marking Code>PET-GF30FR(17)<ISO 11469
Polymer FamilyPolyester
Polymer TypePET
Processing MethodInjection Molding
Product CategoryFlame Retardant Resins
 Glass Reinforced Resins
Region Available - GlobalYes
Resin IdentificationPET-GF30FR(17)ISO 1043
RoHS ComplianceContact Manufacturer
Ultrasonic WeldableYes
UsesAppliances
 Electrical Parts
 Electrical/Electronic Applications
 Phenolic Replacement
 Structural Parts

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-38917.html

免责声明: 本文 DuPont Performance Polymers Rynite® FR530 NC010 PET 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4