- 密度 [g/cm3]: 1.3
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.300 g/cc | 0.04697 lb/in³ | |||
| 1.650 g/cc | 0.05961 lb/in³ | Coating on BOPP | |||
| Solids Content | 58 % | 58 % | |||
| pH | 3.0 | 3.0 | |||
| Water Vapor Transmission | 16.0 g/m²/day @Temperature 38.0 °C | 1.03 g/100 in²/day @Temperature 100 °F | 90% RH; 1 µm Coating on BOPP | ||
| Oxygen Transmission Rate | 54.0 cc/m²/day | 3.48 cc/100 in²/day | 25°C, 1.0 µm, 85% RH; Coating on BOPP | ||
| Viscosity | 10 cP @Temperature 20.0 °C | 10 cP @Temperature 68.0 °F | |||
| Surface Tension | 32 dynes/cm | 32 dynes/cm | Foaming tendency | ||
| Mechanical Properties | Metric | English | Comments | ||
| Coefficient of Friction, Dynamic | 0.21 | 0.21 | vs. Itself - Coating on BOPP | ||
| Heat Seal Strength Initiation Temperature | 111 °C | 232 °F | Heat Seal Threshold; 0.4 N/cm; Coating on BOPP | ||
| Processing Properties | Metric | English | Comments | ||
| Shelf Life | 12.0 Month | 12.0 Month | 23°C | ||
| Descriptive Properties | |||||
| Agency Ratings | EC 1907/2006 (REACH) | ||||
| EU No 10/2011 | |||||
| FDA 21 CFR 175.105 | |||||
| FDA 21 CFR 175.300 | |||||
| FDA 21 CFR 176.170 | |||||
| FDA 21 CFR 176.180 | |||||
| FDA 21 CFR 177.1630 | |||||
| Availability | Asia Pacific | ||||
| Europe | |||||
| North America | |||||
| Emulsion Type | Anionic | ||||
| Filmability | 18°C | Minimum Film Forming Temperature | |||
| Forms | Liquid | ||||
| Generic | PVDC | ||||
| Heat Seal Maximum Resistance | 2.3 N/cm | Coating on BOPP | |||
| Uses | Coating Applications | ||||