- 弯曲强度 [MPa]: 38.0
| Mechanical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Tensile Strength, Ultimate | 38.0 - 47.0 MPa | 5510 - 6820 psi | |||
| Taber Abrasion, mg/1000 Cycles | 17 | 17 | CS 17 wheel, 1 kg load | ||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 3.50e+14 ohm-cm @Temperature 20.0 °C | 3.50e+14 ohm-cm @Temperature 68.0 °F | 65% RH at 500 V; ASTM D257 | ||
| Surface Resistance | 2.40e+14 ohm @Temperature 20.0 °C | 2.40e+14 ohm @Temperature 68.0 °F | 65% RH at 500 V; ASTM D257 | ||
| Dielectric Constant | 3.1 @Frequency 1e+6 Hz | 3.1 @Frequency 1e+6 Hz | |||
| 3.9 @Frequency 100 Hz | 3.9 @Frequency 100 Hz | ||||
| Dielectric Strength | 30.5 kV/mm @Thickness 0.400 mm | 775 kV/in @Thickness 0.0157 in | thick | ||
| Thermal Properties | Metric | English | Comments | ||
| Heat of Fusion | 83.7 J/g | 36.0 BTU/lb | |||
| CTE, linear | 150 µm/m-°C @Temperature 20.0 °C | 83.3 µin/in-°F @Temperature 68.0 °F | |||
| Descriptive Properties | |||||
| Flammability | self-extinguishing | ASTM D 635 (measured at a thickness greater than 3mm to eliminate the influence of substrate) | |||