- 拉伸强度 [MPa]: 6.07
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 0.960 g/cc | 0.960 g/cc | ASTM D792 |
| Linear Mold Shrinkage | 0.020 cm/cm | 0.020 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Shore A | 50 | 50 | 5 sec; ASTM D2240 |
| Tensile Strength, Yield | 6.07 MPa | 880 psi | Method A (Dumbbell & Section), 20 in/min, Break; ASTM D412 |
| 1.83 MPa @Strain 100 % | 265 psi @Strain 100 % | Method A (Dumbbell & Section), 20 in/min; ASTM D412 | |
| 3.72 MPa @Strain 300 % | 540 psi @Strain 300 % | Method A (Dumbbell & Section), 20 in/min; ASTM D412 | |
| Elongation at Break | 615 % | 615 % | Method A (Dumbbell & Section), 20 in/min; ASTM D412 |
| Tear Strength | 28.0 kN/m | 160 pli | Die C (graves), 20 in/min; ASTM D624 |