- 熔体流动速率 [g/10min]: 10.0
- 拉伸强度 [MPa]: 30.0
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Specific Gravity | 1.11 g/cc | 1.11 g/cc | ASTM D792 | ||
| Melt Flow | 10 g/10 min | 10 g/10 min | |||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Shore D | 65 | 65 | |||
| Tensile Strength, Yield | 30.00 MPa | 4351 psi | ASTM D412 | ||
| Elongation at Break | 372 % | 372 % | ASTM D412 | ||
| 100% Modulus | 0.01600 GPa | 2.320 ksi | ASTM D412 | ||
| 300% Modulus | 0.0250 GPa | 3.63 ksi | ASTM D412 | ||
| Abrasion | 40 | 40 | [mm^3]; DIN 53.516 | ||
| Thermal Properties | Metric | English | Comments | ||
| Melting Point | 140 - 150 °C | 284 - 302 °F | MQSA 114 | ||
| Processing Properties | Metric | English | Comments | ||
| Feed Temperature | 155 °C | 311 °F | |||
| Nozzle Temperature | 170 °C | 338 °F | |||
| Zone 1 | 170 - 180 °C | 338 - 356 °F | |||
| Zone 2 | 180 - 190 °C | 356 - 374 °F | |||
| Zone 3 | 190 - 200 °C | 374 - 392 °F | |||
| Zone 4 | 185 - 195 °C | 365 - 383 °F | |||
| Die Temperature | 165 - 175 °C | 329 - 347 °F | |||
| Mold Temperature | 35.0 °C | 95.0 °F | |||
| Moisture Content | <= 0.10 % | <= 0.10 % | MQSA 44 | ||
| Descriptive Properties | |||||
| Compression zone | 320°C | ||||
| Metering zone | 320°C | ||||