- 弯曲模量 [MPa]: 10.3
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Specific Gravity | 1.53 g/cc | 1.53 g/cc | ASTM D792 | ||
| Deformation | 0.080 % | 0.080 % | ASTM D621 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Rockwell M | 107 | 107 | ASTM D785 | ||
| Hardness, Shore D | 90 | 90 | ASTM D2240 | ||
| Tensile Strength at Break | 186 MPa | 27000 psi | ASTM D368 | ||
| Elongation at Break | 2.4 % | 2.4 % | ASTM D638 | ||
| Flexural Strength | 262 MPa | 38000 psi | ASTM D790 | ||
| Flexural Modulus | 10.3 GPa | 1500 ksi | Flexural 0.5% Secant Modulus; ASTM D790 | ||
| Compressive Yield Strength | >= 4.14 MPa | >= 600 psi | |||
| Compressive Strength | 241 MPa | 35000 psi | ASTM D695 | ||
| Shear Strength | 80.7 MPa | 11700 psi | Transverse; ASTM D732 | ||
| 105 MPa | 15300 psi | Axial; ASTM D732 | |||
| Secant Modulus | 11.86 GPa | 1720 ksi | Tensile 0.5% Secant Modulus; ASTM D638 | ||
| Coefficient of Friction, Dynamic | 0.24 | 0.24 | PV=12600 psi-ft./min.; ASTM G77 | ||
| K (wear) Factor | 353 x 10-8 mm³/N-M | 175 x 10-10 in³-min/ft-lb-hr | ASTM G77 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear | 25.2 µm/m-°C @Temperature <=149 °C | 14.0 µin/in-°F @Temperature <=300 °F | ASTM E228 | ||
| 45.0 µm/m-°C @Temperature >=149 °C | 25.0 µin/in-°F @Temperature >=300 °F | ASTM E228 | |||
| Descriptive Properties | |||||
| Color | Tan | ||||