Solvay Specialty Polymers KetaSpire® KT-820 SL30 Polyetheretherketone (PEEK)

Solvay Specialty Polymers KetaSpire® KT-820 SL30 Polyetheretherketone (PEEK) 物性表: Solvay Specialty Polymers KetaSpire® KT-820 SL30 Polyetheretherketone (PEEK)物性表及特性介绍,Solvay Specialty Polymers KetaSpire® KT-820 SL30 Polyetheretherketone (PEEK)注塑参数详情,如需Solvay Specialty Polymers KetaSpire® KT-820 SL30 Polyetheretherketone (PEEK)下载, 可到相关下载区下载
  • 熔体流动速率 [g/10min]: 2.4
  • 吸水率 [%]: 0.14
  • 缺口冲击强度: 0.69
  • 拉伸强度 [MPa]: 150.0
  • 弯曲模量 [MPa]: 10.5
 
Physical PropertiesMetricEnglishComments
Specific Gravity 1.45 g/cc1.45 g/ccASTM D792
Water Absorption 0.14 %
@Time 86400 sec
0.14 %
@Time 24.0 hour
ASTM D570
Viscosity 270000 cP
@Shear Rate 1000 1/s,
Temperature 400 °C
270000 cP
@Shear Rate 1000 1/s,
Temperature 752 °F
Melt; ASTM D3835
Linear Mold Shrinkage, Flow 0.0010 - 0.0030 cm/cm
@Thickness 3.18 mm
0.0010 - 0.0030 in/in
@Thickness 0.125 in
5" x 0.5" x 0.125" bars; ASTM D955
Linear Mold Shrinkage, Transverse 0.015 - 0.017 cm/cm
@Thickness 3.18 mm
0.015 - 0.017 in/in
@Thickness 0.125 in
5" x 0.5" x 0.125" bars; ASTM D955
Melt Flow 2.4 g/10 min
@Load 2.16 kg,
Temperature 400 °C
2.4 g/10 min
@Load 4.76 lb,
Temperature 752 °F
ASTM D1238
 
Mechanical PropertiesMetricEnglishComments
Hardness, Rockwell M 8080M-Scale; ASTM D785
Hardness, Shore D 86
@Time 1.00 sec
86
@Time 0.000278 hour
ASTM D2240
Tensile Strength 133 MPa19300 psiASTM D638
Tensile Strength, Yield 150 MPa21800 psiISO 527-2/1A/5
Elongation at Break 2.8 %2.8 %5.0 mm/min; ASTM D638
 2.8 %2.8 %ISO 527-2/1A/5
Tensile Modulus 11.0 GPa1600 ksi5.0 mm/min; ASTM D638
 14.4 GPa2090 ksiISO 527-2/1A/1
Flexural Strength 218 MPa31600 psiISO 178
 221 MPa32100 psiASTM D790
Flexural Modulus 10.5 GPa1520 ksiASTM D790
 14.9 GPa2160 ksiISO 178
Compressive Strength 110 MPa16000 psiASTM D695
Shear Strength 70.3 MPa10200 psiASTM D732
Izod Impact, Notched 0.690 J/cm1.29 ft-lb/inASTM D256
 5.30 J/cm9.93 ft-lb/inASTM D4812
Izod Impact, Notched (ISO) 9.00 kJ/m²4.28 ft-lb/in²ISO 180
Izod Impact, Unnotched (ISO) 34.0 kJ/m²16.2 ft-lb/in²ISO 180
Coefficient of Friction, Dynamic 0.0800.080Lubricated conditions: 800 fpm and 750 psi; ASTM D3702
 0.0900.090Lubricated conditions: 75 fpm and 1000 psi; ASTM D3702
 0.250.25Dry conditions: 800 fpm and 31.25 psi; ASTM D3702
 0.300.30Dry conditions: 200 fpm and 125 psi; ASTM D3702
 
Thermal PropertiesMetricEnglishComments
CTE, linear, Parallel to Flow  22.0 µm/m-°C
@Temperature 0.000 - 150 °C
12.2 µin/in-°F
@Temperature 32.0 - 302 °F
ASTM E831
 22.0 µm/m-°C
@Temperature -50.0 - 50.0 °C
12.2 µin/in-°F
@Temperature -58.0 - 122 °F
TMA; ASTM E831
Specific Heat Capacity  1.36 J/g-°C
@Temperature 50.0 °C
0.325 BTU/lb-°F
@Temperature 122 °F
DSC
 1.84 J/g-°C
@Temperature 200 °C
0.440 BTU/lb-°F
@Temperature 392 °F
DSC
Thermal Conductivity 0.400 W/m-K2.78 BTU-in/hr-ft²-°FASTM E1530
Melting Point 342 °C648 °FPeak; ASTM D3418
Deflection Temperature at 1.8 MPa (264 psi) 291 °C556 °FUnannealed; ASTM D648
 291 °C556 °FAnnealed; ASTM D648
Glass Transition Temp, Tg 152 °C306 °FASTM D3418
Flammability, UL94  V-0
@Thickness 0.800 mm
V-0
@Thickness 0.0315 in
UL 94
 V-0
@Thickness 1.60 mm
V-0
@Thickness 0.0630 in
UL 94
 
Processing PropertiesMetricEnglishComments
Rear Barrel Temperature 366 °C691 °F
Middle Barrel Temperature 370 °C698 °F
Front Barrel Temperature 375 °C707 °F
Nozzle Temperature 380 °C716 °F
Mold Temperature 175 - 205 °C347 - 401 °F
Drying Temperature 150 °C302 °F
Dry Time 4.00 hour4.00 hour
 
Descriptive Properties
AdditiveCarbon Fiber + Graphite + PTFE Lubricant
AppearanceBlack
AvailabilityAfrica & Middle East
 Asia Pacific
 Europe
 North America
 South America
FeaturesFatigue Resistant
 Flame Retardant
 Good Chemical Resistance
 Good Dimensional Stability
 Good Wear Resistance
 High Heat Resistance
FormsPellets
GenericPEEK
Injection RateFast
Processing MethodInjection Molding
 Machining
 Profile Extrusion
Screw Compression Ratio2.5:1.0 to 3.5:1.0
UsesAircraft Applications
 Bearings
 Bushings
 Film
 Gears
 Industrial Applications
 Profiles
 Rods
 Sheet
 Tubing

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-50305.html

免责声明: 本文 Solvay Specialty Polymers KetaSpire® KT-820 SL30 Polyetheretherketone (PEEK) 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4