Arlon 10842S060 0.060" (1.52 mm) Fully Cured, Unsupported, Silicone Rubber物性表参数

Arlon 10842S060 0.060" (1.52 mm) Fully Cured, Unsupported, Silicone Rubber

Arlon 10842S060 0.060" (1.52 mm) Fully Cured, Unsupported, Silicone Rubber 物性表: Arlon 10842S060 0.060" (1.52 mm) Fully Cured, Unsupported, Silicone Rubber物性表及特性介绍,Arlon 10842S060 0.060" (1.52 mm) Fully Cured, Unsupported, Silicone Rubber注塑参数详情,如需Arlon 10842S060 0.060" (1.52 mm) Fully Cured, Unsupported, Silicone Rubber下载, 可到相关下载区下载

Physical Properties	Metric	English	Comments

Thickness	76.2 microns	3.00 mil	Polyethylene Interleave
	1370 - 1680 microns	54.0 - 66.0 mil	Overall
	1370 - 1680 microns	54.0 - 66.0 mil	Side 1

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	35 - 45	35 - 45	Compound Property
Tensile Strength	>= 6.89 MPa	>= 1000 psi	Compound Property
Elongation at Break	>= 700 %	>= 700 %	Compound Property
Tear Strength	>= 35.1 kN/m	>= 200 pli	Compound Property
Compression Set	<= 28 %	<= 28 %	Compound Property

Thermal Properties	Metric	English	Comments
Maximum Service Temperature, Air	232 °C	450 °F
Minimum Service Temperature, Air	-56.7 °C	-70.0 °F

Descriptive Properties
Color	Saddle Brown
Total Product Weight (oz/yd²)	45.4 - 55.6

关键词:
供应
硅胶
Unsupported
Silicone Rubber
Arlon 10842S060 0.060" (1.52 mm) Fully Cured

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-33802.html

免责声明: 本文 Arlon 10842S060 0.060" (1.52 mm) Fully Cured, Unsupported, Silicone Rubber 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络