塑胶原料之家
  1. 首页
  2. 资讯
  3. 产品资讯
  4. PA66 70G35HSRX BK099 优良的耐磨性、

PA66 70G35HSRX BK099 优良的耐磨性、

PA66 70G35HSRX BK099 的收缩率在1%~2%之间。PA66 70G35HSRX BK099 加入玻璃纤维添加剂可以将收缩率降低到0.2%~1% 。PA66 70G35HSRX BK099 收缩率在流程方向和与流程方向相垂直方向上的相异是较大的。PA66对许多溶剂具有抗溶性，但对酸和其它一些氯化剂的抵抗力较弱。
 PA66 70G35HSRX BK099 具有优良的耐磨性、自润滑性，机械强度较高。但吸水性较大，因而尺寸稳定性较差。
 物性表：
Physical Properties Metric English Comments
Density  1.24 g/cc 0.0448 lb/in³  
  1.41 g/cc 0.0509 lb/in³ DAM; ISO 1183
Water Absorption  5.5 %
@Thickness 2.00 mm		 5.5 %
@Thickness 0.0787 in		 DAM; Sim. to ISO 62
Moisture Absorption  1.70 %
@Thickness 2.00 mm		 1.70 %
@Thickness 0.0787 in		 DAM; Sim. to ISO 62
Viscosity    66615.8 cP
@Shear Rate 5000 1/s,
Temperature 305 °C		 66615.8 cP
@Shear Rate 5000 1/s,
Temperature 581 °F		 ISO 11403-1 -2
  81165.8 cP
@Shear Rate 5000 1/s,
Temperature 295 °C		 81165.8 cP
@Shear Rate 5000 1/s,
Temperature 563 °F		 ISO 11403-1 -2
  100580 cP
@Shear Rate 5000 1/s,
Temperature 285 °C		 100580 cP
@Shear Rate 5000 1/s,
Temperature 545 °F		 ISO 11403-1 -2
  200716 cP
@Shear Rate 500 1/s,
Temperature 305 °C		 200716 cP
@Shear Rate 500 1/s,
Temperature 581 °F		 ISO 11403-1 -2
  253858 cP
@Shear Rate 500 1/s,
Temperature 295 °C		 253858 cP
@Shear Rate 500 1/s,
Temperature 563 °F		 ISO 11403-1 -2
  323772 cP
@Shear Rate 500 1/s,
Temperature 285 °C		 323772 cP
@Shear Rate 500 1/s,
Temperature 545 °F		 ISO 11403-1 -2
Viscosity Test  150 cm³/g 150 cm³/g DAM; ISO 307 1157 1628
Linear Mold Shrinkage, Flow  0.0030 cm/cm 0.0030 in/in DAM; ISO 294-4 2577
Linear Mold Shrinkage, Transverse  0.011 cm/cm 0.011 in/in DAM; ISO 294-4 2577
 
Mechanical Properties Metric English Comments
Ball Indentation Hardness  285 MPa 41300 psi DAM; H 961/30; ISO 2039-1
Tensile Strength at Break  150 MPa 21800 psi 50%RH; ISO 527-1/-2
  210 MPa 30500 psi DAM; ISO 527-1/-2
Tensile Stress    7.49 MPa
@Strain 0.190 %,
Temperature 150 °C		 1090 psi
@Strain 0.190 %,
Temperature 302 °F		 50%RH; ISO 11403-1 -2
  9.23 MPa
@Strain 0.220 %,
Temperature 180 °C		 1340 psi
@Strain 0.220 %,
Temperature 356 °F		 DAM; ISO 11403-1 -2
  12.19 MPa
@Strain 0.220 %,
Temperature 90.0 °C		 1768 psi
@Strain 0.220 %,
Temperature 194 °F		 50%RH; ISO 11403-1 -2
  14.47 MPa
@Strain 0.240 %,
Temperature 90.0 °C		 2099 psi
@Strain 0.240 %,
Temperature 194 °F		 DAM; ISO 11403-1 -2
  16.86 MPa
@Strain 0.250 %,
Temperature 40.0 °C		 2445 psi
@Strain 0.250 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  17.67 MPa
@Strain 0.230 %,
Temperature 23.0 °C		 2563 psi
@Strain 0.230 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  18.42 MPa
@Strain 0.400 %,
Temperature 150 °C		 2672 psi
@Strain 0.400 %,
Temperature 302 °F		 DAM; ISO 11403-1 -2
  28.36 MPa
@Strain 0.290 %,
Temperature 0.000 °C		 4113 psi
@Strain 0.290 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  28.62 MPa
@Strain 0.260 %,
Temperature 40.0 °C		 4151 psi
@Strain 0.260 %,
Temperature 104 °F		 DAM; ISO 11403-1 -2
  32.65 MPa
@Strain 1.13 %,
Temperature 150 °C		 4735 psi
@Strain 1.13 %,
Temperature 302 °F		 50%RH; ISO 11403-1 -2
  39.21 MPa
@Strain 0.310 %,
Temperature 0.000 °C		 5687 psi
@Strain 0.310 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  40.07 MPa
@Strain 0.900 %,
Temperature 90.0 °C		 5812 psi
@Strain 0.900 %,
Temperature 194 °F		 50%RH; ISO 11403-1 -2
  42.44 MPa
@Strain 1.61 %,
Temperature 180 °C		 6155 psi
@Strain 1.61 %,
Temperature 356 °F		 DAM; ISO 11403-1 -2
  46.29 MPa
@Strain 0.360 %,
Temperature -20.0 °C		 6714 psi
@Strain 0.360 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  50.25 MPa
@Strain 1.49 %,
Temperature 150 °C		 7288 psi
@Strain 1.49 %,
Temperature 302 °F		 DAM; ISO 11403-1 -2
  50.93 MPa
@Strain 1.01 %,
Temperature 90.0 °C		 7387 psi
@Strain 1.01 %,
Temperature 194 °F		 DAM; ISO 11403-1 -2
  51.91 MPa
@Strain 0.780 %,
Temperature 23.0 °C		 7529 psi
@Strain 0.780 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  52.11 MPa
@Strain 0.920 %,
Temperature 40.0 °C		 7558 psi
@Strain 0.920 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  52.39 MPa
@Strain 2.42 %,
Temperature 150 °C		 7599 psi
@Strain 2.42 %,
Temperature 302 °F		 50%RH; ISO 11403-1 -2
  60.88 MPa
@Strain 3.24 %,
Temperature 180 °C		 8830 psi
@Strain 3.24 %,
Temperature 356 °F		 DAM; ISO 11403-1 -2
  63.15 MPa
@Strain 0.560 %,
Temperature 23.0 °C		 9159 psi
@Strain 0.560 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  65.51 MPa
@Strain 4.00 %,
Temperature 150 °C		 9501 psi
@Strain 4.00 %,
Temperature 302 °F		 50%RH; ISO 11403-1 -2
  66.01 MPa
@Strain 1.85 %,
Temperature 90.0 °C		 9574 psi
@Strain 1.85 %,
Temperature 194 °F		 50%RH; ISO 11403-1 -2
  66.32 MPa
@Strain 0.490 %,
Temperature -20.0 °C		 9619 psi
@Strain 0.490 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
  69.5 MPa
@Strain 0.760 %,
Temperature 0.000 °C		 10100 psi
@Strain 0.760 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  72.35 MPa
@Strain 5.03 %,
Temperature 180 °C		 10490 psi
@Strain 5.03 %,
Temperature 356 °F		 DAM; ISO 11403-1 -2
  72.59 MPa
@Strain 2.90 %,
Temperature 150 °C		 10530 psi
@Strain 2.90 %,
Temperature 302 °F		 DAM; ISO 11403-1 -2
  74.0 MPa
@Strain 0.700 %,
Temperature 40.0 °C		 10700 psi
@Strain 0.700 %,
Temperature 104 °F		 DAM; ISO 11403-1 -2
  80.93 MPa
@Strain 1.99 %,
Temperature 90.0 °C		 11740 psi
@Strain 1.99 %,
Temperature 194 °F		 DAM; ISO 11403-1 -2
  84.39 MPa
@Strain 3.11 %,
Temperature 90.0 °C		 12240 psi
@Strain 3.11 %,
Temperature 194 °F		 50%RH; ISO 11403-1 -2
  84.44 MPa
@Strain 1.79 %,
Temperature 40.0 °C		 12250 psi
@Strain 1.79 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  86.41 MPa
@Strain 4.58 %,
Temperature 150 °C		 12530 psi
@Strain 4.58 %,
Temperature 302 °F		 DAM; ISO 11403-1 -2
  87.82 MPa
@Strain 1.57 %,
Temperature 23.0 °C		 12740 psi
@Strain 1.57 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  93.47 MPa
@Strain 0.820 %,
Temperature -20.0 °C		 13560 psi
@Strain 0.820 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  97.09 MPa
@Strain 0.810 %,
Temperature 0.000 °C		 14080 psi
@Strain 0.810 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  105.38 MPa
@Strain 3.18 %,
Temperature 90.0 °C		 15284 psi
@Strain 3.18 %,
Temperature 194 °F		 DAM; ISO 11403-1 -2
  108.13 MPa
@Strain 2.82 %,
Temperature 40.0 °C		 15683 psi
@Strain 2.82 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  108.59 MPa
@Strain 1.31 %,
Temperature 0.000 °C		 15750 psi
@Strain 1.31 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  110.68 MPa
@Strain 1.02 %,
Temperature 23.0 °C		 16053 psi
@Strain 1.02 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  115.45 MPa
@Strain 2.44 %,
Temperature 23.0 °C		 16745 psi
@Strain 2.44 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  116.32 MPa
@Strain 1.23 %,
Temperature 40.0 °C		 16871 psi
@Strain 1.23 %,
Temperature 104 °F		 DAM; ISO 11403-1 -2
  125.68 MPa
@Strain 0.990 %,
Temperature -20.0 °C		 18228 psi
@Strain 0.990 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
  136.46 MPa
@Strain 1.30 %,
Temperature -20.0 °C		 19792 psi
@Strain 1.30 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  145.9 MPa
@Strain 2.02 %,
Temperature 0.000 °C		 21160 psi
@Strain 2.02 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  146.62 MPa
@Strain 1.32 %,
Temperature 0.000 °C		 21265 psi
@Strain 1.32 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  153.73 MPa
@Strain 1.55 %,
Temperature 23.0 °C		 22297 psi
@Strain 1.55 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  154.52 MPa
@Strain 1.95 %,
Temperature 40.0 °C		 22411 psi
@Strain 1.95 %,
Temperature 104 °F		 DAM; ISO 11403-1 -2
  176.66 MPa
@Strain 1.55 %,
Temperature -20.0 °C		 25622 psi
@Strain 1.55 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
  180.85 MPa
@Strain 1.92 %,
Temperature -20.0 °C		 26230 psi
@Strain 1.92 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  191.46 MPa
@Strain 1.93 %,
Temperature 0.000 °C		 27769 psi
@Strain 1.93 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  191.51 MPa
@Strain 2.22 %,
Temperature 23.0 °C		 27776 psi
@Strain 2.22 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  217.22 MPa
@Strain 2.12 %,
Temperature -20.0 °C		 31505 psi
@Strain 2.12 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
Elongation at Break  3.5 % 3.5 % DAM; ISO 527-1/-2
  5.5 % 5.5 % 50%RH; ISO 527-1/-2
Tensile Modulus  9.00 GPa 1310 ksi 50%RH; ISO 527-1/-2
  12.0 GPa 1740 ksi DAM; ISO 527-1/-2
Secant Modulus    0.776543 GPa
@Strain 9.72 %,
Temperature 200 °C		 112.630 ksi
@Strain 9.72 %,
Temperature 392 °F		 DAM; ISO 11403-1 -2
  1.01458 GPa
@Strain 6.79 %,
Temperature 200 °C		 147.155 ksi
@Strain 6.79 %,
Temperature 392 °F		 DAM; ISO 11403-1 -2
  1.40389 GPa
@Strain 4.11 %,
Temperature 200 °C		 203.620 ksi
@Strain 4.11 %,
Temperature 392 °F		 DAM; ISO 11403-1 -2
  1.91698 GPa
@Strain 6.30 %,
Temperature 40.0 °C		 278.039 ksi
@Strain 6.30 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  2.17571 GPa
@Strain 1.77 %,
Temperature 200 °C		 315.565 ksi
@Strain 1.77 %,
Temperature 392 °F		 DAM; ISO 11403-1 -2
  2.32337 GPa
@Strain 5.82 %,
Temperature 23.0 °C		 336.982 ksi
@Strain 5.82 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  3.16415 GPa
@Strain 3.71 %,
Temperature 40.0 °C		 458.928 ksi
@Strain 3.71 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  3.52174 GPa
@Strain 0.230 %,
Temperature 200 °C		 510.793 ksi
@Strain 0.230 %,
Temperature 392 °F		 DAM; ISO 11403-1 -2
  4.05781 GPa
@Strain 3.20 %,
Temperature 23.0 °C		 588.545 ksi
@Strain 3.20 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  4.44333 GPa
@Strain 2.10 %,
Temperature 40.0 °C		 644.461 ksi
@Strain 2.10 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  5.29568 GPa
@Strain 1.85 %,
Temperature 23.0 °C		 768.085 ksi
@Strain 1.85 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  5.66413 GPa
@Strain 0.920 %,
Temperature 40.0 °C		 821.525 ksi
@Strain 0.920 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  6.48571 GPa
@Strain 2.59 %,
Temperature 0.000 °C		 940.687 ksi
@Strain 2.59 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  6.65513 GPa
@Strain 0.780 %,
Temperature 23.0 °C		 965.260 ksi
@Strain 0.780 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  6.744 GPa
@Strain 0.250 %,
Temperature 40.0 °C		 978.1 ksi
@Strain 0.250 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  6.86824 GPa
@Strain 2.55 %,
Temperature 40.0 °C		 996.169 ksi
@Strain 2.55 %,
Temperature 104 °F		 DAM; ISO 11403-1 -2
  7.45603 GPa
@Strain 2.82 %,
Temperature 23.0 °C		 1081.42 ksi
@Strain 2.82 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  7.68261 GPa
@Strain 0.230 %,
Temperature 23.0 °C		 1114.29 ksi
@Strain 0.230 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  7.93399 GPa
@Strain 1.53 %,
Temperature 0.000 °C		 1150.75 ksi
@Strain 1.53 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  8.60744 GPa
@Strain 2.42 %,
Temperature -20.0 °C		 1248.42 ksi
@Strain 2.42 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  8.95172 GPa
@Strain 1.45 %,
Temperature 40.0 °C		 1298.36 ksi
@Strain 1.45 %,
Temperature 104 °F		 DAM; ISO 11403-1 -2
  9.11949 GPa
@Strain 2.36 %,
Temperature 0.000 °C		 1322.69 ksi
@Strain 2.36 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  9.14474 GPa
@Strain 0.760 %,
Temperature 0.000 °C		 1326.35 ksi
@Strain 0.760 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  9.36434 GPa
@Strain 2.58 %,
Temperature -20.0 °C		 1358.20 ksi
@Strain 2.58 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
  9.52159 GPa
@Strain 1.76 %,
Temperature 23.0 °C		 1381.01 ksi
@Strain 1.76 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  9.77931 GPa
@Strain 0.290 %,
Temperature 0.000 °C		 1418.39 ksi
@Strain 0.290 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  10.175 GPa
@Strain 1.48 %,
Temperature -20.0 °C		 1475.8 ksi
@Strain 1.48 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  10.5714 GPa
@Strain 0.700 %,
Temperature 40.0 °C		 1533.28 ksi
@Strain 0.700 %,
Temperature 104 °F		 DAM; ISO 11403-1 -2
  10.7191 GPa
@Strain 1.52 %,
Temperature 0.000 °C		 1554.70 ksi
@Strain 1.52 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  10.851 GPa
@Strain 1.02 %,
Temperature 23.0 °C		 1573.8 ksi
@Strain 1.02 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  11.0077 GPa
@Strain 0.260 %,
Temperature 40.0 °C		 1596.56 ksi
@Strain 0.260 %,
Temperature 104 °F		 DAM; ISO 11403-1 -2
  11.0809 GPa
@Strain 1.73 %,
Temperature -20.0 °C		 1607.17 ksi
@Strain 1.73 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
  11.2768 GPa
@Strain 0.560 %,
Temperature 23.0 °C		 1635.59 ksi
@Strain 0.560 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  11.3988 GPa
@Strain 0.820 %,
Temperature -20.0 °C		 1653.28 ksi
@Strain 0.820 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  11.9864 GPa
@Strain 0.810 %,
Temperature 0.000 °C		 1738.51 ksi
@Strain 0.810 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  12.6484 GPa
@Strain 0.310 %,
Temperature 0.000 °C		 1834.52 ksi
@Strain 0.310 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  12.6949 GPa
@Strain 0.990 %,
Temperature -20.0 °C		 1841.27 ksi
@Strain 0.990 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
  12.8583 GPa
@Strain 0.360 %,
Temperature -20.0 °C		 1864.97 ksi
@Strain 0.360 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  13.5347 GPa
@Strain 0.490 %,
Temperature -20.0 °C		 1963.07 ksi
@Strain 0.490 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
Charpy Impact Unnotched  8.00 J/cm² 38.1 ft-lb/in² DAM; ISO 179/1eU
  10.0 J/cm² 47.6 ft-lb/in² 50%RH; ISO 179/1eU
  7.00 J/cm²
@Temperature -30.0 °C		 33.3 ft-lb/in²
@Temperature -22.0 °F		 50%RH; ISO 179/1eU
  8.00 J/cm²
@Temperature -30.0 °C		 38.1 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 179/1eU
Charpy Impact, Notched  1.00 J/cm² 4.76 ft-lb/in² DAM; ISO 179/1eA
  1.80 J/cm² 8.57 ft-lb/in² 50%RH; ISO 179/1eA
   1.00 J/cm²
@Temperature -30.0 °C		 4.76 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 179/1eA
  1.00 J/cm²
@Temperature -30.0 °C		 4.76 ft-lb/in²
@Temperature -22.0 °F		 50%RH; ISO 179/1eA
Puncture Energy  6.00 J 4.43 ft-lb DAM; ISO 6603-2
Tensile Creep Modulus, 1 hour  8500 MPa
@Time 3600 sec		 1.23e+6 psi
@Time 1.00 hour		 50%RH; ISO 899-1
Tensile Creep Modulus, 1000 hours  6500 MPa
@Time 3.60e+6 sec		 943000 psi
@Time 1000 hour		 50%RH; ISO 899-1
 
Electrical Properties Metric English Comments
Volume Resistivity  1.00e+11 ohm-cm 1.00e+11 ohm-cm 50%RH; IEC 60093
  1.00e+15 ohm-cm 1.00e+15 ohm-cm DAM; IEC 60093
Surface Resistance  1.00e+13 ohm 1.00e+13 ohm 50%RH; IEC 60093
 
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow  17.0 µm/m-°C 9.44 µin/in-°F DAM; ISO 11359-1/-2
CTE, linear, Transverse to Flow  85.0 µm/m-°C 47.2 µin/in-°F DAM; ISO 11359-1/-2
Specific Heat Capacity  2.13 J/g-°C 0.509 BTU/lb-°F  
Thermal Conductivity  0.240 W/m-K 1.67 BTU-in/hr-ft²-°F of melt
Melting Point  261 °C 502 °F DAM; 10°C/min; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi)  260 °C 500 °F DAM; ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)  252 °C 486 °F DAM; ISO 75-1/-2
Glass Transition Temp, Tg  80.0 °C 176 °F DAM; 10°C/min; ISO 11357-1/-2
Flammability, UL94    HB
@Thickness 1.50 mm		 HB
@Thickness 0.0591 in		 DAM; IEC 60695-11-10
  HB
@Thickness 0.700 mm		 HB
@Thickness 0.0276 in		 DAM; IEC 60695-11-10
 
Descriptive Properties
Additives Release agent  
Delivery form Pellets  
Part Marking Code >PA66-GF35< ISO 11469
Processing Injection Moulding  
Regional Availability Asia Pacific  
  Europe  
  Global  
  Near East/Africa  
  North America  
  South and Central America  
Resin Identification PA66-GF35  
Special characteristics Heat stabilised or stable to heat
PA66在较高温度也能保持较强的强度和刚度。PA66在成型后仍然具有吸湿性，其程度主要取决于材料的组成、壁厚以及环境条件。
颗粒05
上海松翰塑化科技有限公司，供应原料，品质真实,物实价廉。
PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。
欢迎各位客户前来咨询：
联系人： 夏先生  
手  机：13501802636   
QQ    ：205730283  
邮 箱 ：205730283@qq.com 

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/news/

本文链接: http://www.su-jiao.com/news/show-25506.html

免责声明: 本文 PA66 70G35HSRX BK099 优良的耐磨性、 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他资讯信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4