- 吸水率 [%]: 0.21
- 缺口冲击强度: 0.262
- 弯曲强度 [MPa]: 73.77
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Water Absorption | 0.21 % | 0.21 % | in 24 hours. |
| Viscosity Measurement | 400 | 400 | |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Shore D | 87 | 87 | |
| Tensile Strength, Ultimate | 73.77 MPa | 10700 psi | |
| Elongation at Break | 5.9 % | 5.9 % | |
| Flexural Strength | 134.45 MPa | 19500 psi | |
| Izod Impact, Notched | 0.262 J/cm | 0.491 ft-lb/in | |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 7.00e+10 ohm-cm @Temperature 93.3 °C | 7.00e+10 ohm-cm @Temperature 200 °F | |
| 3.00e+13 ohm-cm @Temperature 65.6 °C | 3.00e+13 ohm-cm @Temperature 150 °F | ||
| 8.00e+13 ohm-cm @Temperature 25.0 °C | 8.00e+13 ohm-cm @Temperature 77.0 °F | ||
| Dielectric Constant | 4.0 @Frequency 1e+6 Hz | 4.0 @Frequency 1e+6 Hz | |
| Dissipation Factor | 0.020 @Frequency 1e+6 Hz | 0.020 @Frequency 1e+6 Hz | |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | 77.0 °C | 171 °F | Deflection temperature; load unknown. |
| Processing Properties | Metric | English | Comments |
| Processing Temperature | 25.0 °C | 77.0 °F | Curing time: 16 hours; Postcure: 2 hours/100°C (212°F) |