- 吸水率 [%]: 0.21
- 缺口冲击强度: 0.272
- 弯曲强度 [MPa]: 62.05
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Water Absorption | 0.21 % | 0.21 % | in 24 hours. |
| Viscosity Measurement | 1600 | 1600 | |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Shore D | 82 | 82 | |
| Tensile Strength, Ultimate | 62.05 MPa | 9000 psi | |
| Elongation at Break | 4.0 % | 4.0 % | |
| Flexural Strength | 102.04 MPa | 14800 psi | |
| Izod Impact, Notched | 0.272 J/cm | 0.510 ft-lb/in | |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 5.00e+11 ohm-cm @Temperature 93.3 °C | 5.00e+11 ohm-cm @Temperature 200 °F | |
| 1.00e+13 ohm-cm @Temperature 65.6 °C | 1.00e+13 ohm-cm @Temperature 150 °F | ||
| 3.00e+15 ohm-cm @Temperature 25.0 °C | 3.00e+15 ohm-cm @Temperature 77.0 °F | ||
| Dielectric Constant | 3.41 @Frequency 1e+6 Hz | 3.41 @Frequency 1e+6 Hz | |
| Dissipation Factor | 0.012 @Frequency 1e+6 Hz | 0.012 @Frequency 1e+6 Hz | |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | 62.0 °C | 144 °F | Deflection temperature; load unknown. |
| Processing Properties | Metric | English | Comments |
| Processing Temperature | 25.0 °C | 77.0 °F | Curing time: 3 weeks |