- 吸水率 [%]: 0.17
- 缺口冲击强度: 0.204
- 弯曲强度 [MPa]: 61.36
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Water Absorption | 0.17 % | 0.17 % | in 24 hours. |
| Viscosity Measurement | 700 | 700 | |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Shore D | 85 | 85 | |
| Tensile Strength, Ultimate | 61.36 MPa | 8900 psi | |
| Elongation at Break | 4.5 % | 4.5 % | |
| Flexural Strength | 106.87 MPa | 15500 psi | |
| Izod Impact, Notched | 0.204 J/cm | 0.382 ft-lb/in | |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | <= 1.00e+9 ohm-cm @Temperature 93.3 °C | <= 1.00e+9 ohm-cm @Temperature 200 °F | |
| 3.00e+11 ohm-cm @Temperature 65.6 °C | 3.00e+11 ohm-cm @Temperature 150 °F | ||
| 2.00e+15 ohm-cm @Temperature 25.0 °C | 2.00e+15 ohm-cm @Temperature 77.0 °F | ||
| Dielectric Constant | 3.68 @Frequency 1e+6 Hz | 3.68 @Frequency 1e+6 Hz | |
| Dissipation Factor | 0.013 @Frequency 1e+6 Hz | 0.013 @Frequency 1e+6 Hz | |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | 59.0 °C | 138 °F | Deflection temperature; load unknown. |
| Processing Properties | Metric | English | Comments |
| Processing Temperature | 25.0 °C | 77.0 °F | Curing time: 6 hours; Postcure: 2 hours/100°C (212°F) |